Shiji Yang
41a9c9de66
uboot-mediatek: update to v2025.07
...
Update to the latest version.
Suppressed patch:
100-04-env-add-support-for-generic-MTD-device.patch[1]
[1] 03fb08d4ae
2025-07-19 02:59:15 +01:00
Enrico Mioso
2a32d215ba
uboot-mediatek: bump to v2025.04
...
The following upstreamed / superseded patches were dropped:
060-01-clk-mediatek-mt7629-fix-parent-clock-of-some-top-clo.patch
060-02-arm-dts-mt7629-fix-sgmii-clock-selection-for-etherne.patch
060-03-net-mediatek-use-correct-register-field-for-SGMII-sp.patch
060-04-net-mediatek-correct-register-name-of-ethsys-syscfg1.patch
060-05-net-mediatek-fix-sgmii-selection-for-mt7622.patch
060-06-net-mediatek-fix-gmac2-usability-for-mt7629.patch
060-07-net-mediatek-add-support-for-10GBASE-R.patch
060-08-net-mediatek-make-sgmii-usxgmii-optional.patch
060-09-net-mediatek-don-t-enable-GDMA-cpu-bridge-unconditio.patch
060-10-net-mediatek-fix-usability-with-wget-command.patch
061-01-net-mediatek-split-ethernet-switch-code-from-mtk_eth.patch
061-02-net-mediatek-add-support-for-MediaTek-MT7987-SoC.patch
061-03-net-mediatek-add-support-for-Airoha-AN8855-ethernet-.patch
070-01-board-mediatek-mt7622-remove-board_late_init.patch
070-02-clk-mediatek-fix-uninitialized-fields-issue-in-INFRA.patch
070-03-configs-mt7629-move-image-load-address-to-0x42000000.patch
070-04-configs-mt7988-move-image-load-address-to-0x44000000.patch
070-05-spi-mtk_spim-add-support-to-use-DT-live-tree.patch
070-06-spi-mtk_spim-check-slave-device-mode-in-spi-mem-s-su.patch
070-07-arm-dts-mediatek-add-quad-mode-capabilities-for-SPI-.patch
070-08-pwm-mediatek-add-pwm3-support-for-mt7981.patch
070-09-pci-mediatek-add-support-for-multiple-ports-in-media.patch
070-10-arm-dts-mediatek-add-pcie-support-for-mt7988.patch
070-11-arm-dts-medaitek-fix-internal-switch-link-speed-of-m.patch
070-12-arm-dts-mediatek-add-support-for-all-three-GMACs-for.patch
070-13-arm-dts-medaitek-add-flash-interface-driving-setting.patch
070-14-arm-dts-mediatek-update-mt7981-mmc-node.patch
070-15-MAINTAINERS-update-file-list-for-MediaTek-ARM-platfo.patch
071-01-pinctrl-mediatek-update-mt7981-pinctrl-driver-based-.patch
100-18-board-mt7629-add-support-for-booting-from-SPI-NAND.patch
290-mt7981-add-USB-nodes.patch
Refreshed all the patches needing it.
Run-tested: GatoNetworks GDSP, Arcadyan Mozart (ynezz),
Zbt WG3526 (dangowrt)
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [patch refresh, Mozart testing]
Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased, tested on MT7621]
2025-05-31 21:16:41 +02:00
Shiji Yang
3d8d807373
uboot-mediatek: move custom uart config symbol to board defconfigs
...
This helps to solve the issue of waiting for "SERIAL_RX_BUFFER_SIZE"
input when enabling verbose log output option (V=s).
Fixes: https://github.com/openwrt/openwrt/issues/18036
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/18043
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-03-15 12:50:57 +01:00
Shiji Yang
4be1bab9ed
uboot-mediatek: move default env files to a dedicated directory
...
Putting all files in the root folder is too messy.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2025-02-09 22:01:21 +00:00
Shiji Yang
10b16d9328
uboot-mediatek: update to v2025.01
...
Remove upstreamed patches:
010-menu-fix-the-logic-checking-whether-ESC-key-is-press.patch [1]
011-menu-add-support-to-check-if-menu-needs-to-be-reprin.patch [2]
012-bootmenu-add-reprint-check.patch [3]
Remove outdated patches:
455-arm-provide-noncached_set_region-prototype-to-fix-build.patch
Some patches have been manually rebased to match the upstream
changes. This patch also fixes the dtc warning for reserved-memory
dts node. If #address-cells and #size-cells are not same as the
root node definitions, the dtc will complain about it.
All defconfigs are refreshed by `make "$board"_defconfig` and
`make savedefconfig`.
[1] ddac69885eccdd7948e2599652cff1
2025-02-09 21:50:58 +00:00
Daniel Golle
f8c22c9bff
uboot-mediatek: update to U-Boot 2024.10
...
Update to latest U-Boot release.
Patches refreshed and fixed when needed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-13 03:00:45 +01:00
Daniel Golle
3a85467427
uboot-mediatek: remove hard-coded UBI volume numbers
...
There is no point in hard-coding the UBI volume numbers as we are
dynamically looking up the volume by volume name in all cases by now.
Remove this relict as it causes problems without being useful for
anything.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-07-14 16:29:49 +01:00
Shiji Yang
a40e0c7529
uboot-mediatek: refresh device defconfig files
...
It seems that most of them are manually modified. However, we can
use `make savedefconfig` to generate a clean defconfig file.
Refreshed by:
```
Boards=(
mt7623n_bpir2_defconfig \
mt7623a_unielec_u7623_02_defconfig \
mt7622_bananapi_bpi-r64-sdmmc_defconfig \
mt7622_bananapi_bpi-r64-emmc_defconfig \
mt7622_bananapi_bpi-r64-snand_defconfig \
mt7622_linksys_e8450_defconfig \
mt7622_ubnt_unifi-6-lr-v1_defconfig \
mt7622_ubnt_unifi-6-lr-v2_defconfig \
mt7622_ubnt_unifi-6-lr-v3_defconfig \
ravpower-rp-wd009-ram_defconfig \
mt7621_zbtlink_zbt-wg3526-16m_defconfig \
mt7986_netcore_n60_defconfig \
mt7986a_bpi-r3-emmc_defconfig \
mt7986a_bpi-r3-nor_defconfig \
mt7986a_bpi-r3-sd_defconfig \
mt7986a_bpi-r3-snand_defconfig \
mt7986_xiaomi_redmi-ax6000_defconfig \
mt7986_tplink_tl-xdr4288_defconfig \
mt7986_tplink_tl-xdr6086_defconfig \
mt7986_tplink_tl-xdr6088_defconfig \
mt7981_qihoo-360t7_defconfig \
mt7981_xiaomi_mi-router-wr30u_defconfig \
mt7981_h3c_magic-nx30-pro_defconfig \
mt7986a_glinet_gl-mt6000_defconfig \
mt7981_cmcc_rax3000m-emmc_defconfig \
mt7981_cmcc_rax3000m-nand_defconfig \
mt7981_jcg_q30-pro_defconfig \
mt7986_zyxel_ex5601-t0_defconfig \
mt7981_xiaomi_mi-router-ax3000t_defconfig \
mt7986a_jdcloud_re-cp-03_defconfig \
mt7986a_bpi-r3-mini-emmc_defconfig \
mt7986a_bpi-r3-mini-snand_defconfig \
mt7981_nokia_ea0326gmp_defconfig \
mt7988a_bananapi_bpi-r4-emmc_defconfig \
mt7988a_bananapi_bpi-r4-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-snand_defconfig \
mt7988a_bananapi_bpi-r4-poe-emmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-snand_defconfig \
mt7622_xiaomi_redmi-router-ax6s-ubi-loader_defconfig \
mt7981_openwrt-one-nor_defconfig \
mt7981_openwrt-one-spi-nand_defconfig \
)
for Board in ${Boards[@]}
do
echo "Refresh board ${Board}"
make ${Board}
make savedefconfig
cat ./defconfig > ./configs/${Board}
done
```
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-07-14 16:29:49 +01:00
Shiji Yang
6951526792
uboot-mediatek: update to U-Boot release v2024.07
...
1. Rename function _do_env_set() to env_do_env_set().
2. Replace kwbimage hack with UBOOT_CUSTOMIZE_CONFIG:
"--disable TOOLS_KWBIMAGE" and "--disable TOOLS_LIBCRYPTO".
3. Disable CONFIG_CMD_BOOTEFI_BOOTMGR for all supported devices
because the newly added UEFI bootmenu entries doesn't work.
4. Enable CONFIG_VERSION_VARIABLE for the OpenWrt One.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Co-authored-by: Daniel Golle <daniel@makrotopia.org>
2024-07-14 16:29:49 +01:00
Chuanhong Guo
2ea8610e4f
uboot-mediatek: add Redmi AX6S as UBI loader
...
Add support for Xiaomi Redmi AX6S to be used as a second-stage
UBI loader.
The defconfig/env is minimal: Boot fit from UBI. If that failed,
load and boot initramfs image from TFTP.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2024-03-21 16:52:09 +08:00
