Enrico Mioso
2a32d215ba
uboot-mediatek: bump to v2025.04
...
The following upstreamed / superseded patches were dropped:
060-01-clk-mediatek-mt7629-fix-parent-clock-of-some-top-clo.patch
060-02-arm-dts-mt7629-fix-sgmii-clock-selection-for-etherne.patch
060-03-net-mediatek-use-correct-register-field-for-SGMII-sp.patch
060-04-net-mediatek-correct-register-name-of-ethsys-syscfg1.patch
060-05-net-mediatek-fix-sgmii-selection-for-mt7622.patch
060-06-net-mediatek-fix-gmac2-usability-for-mt7629.patch
060-07-net-mediatek-add-support-for-10GBASE-R.patch
060-08-net-mediatek-make-sgmii-usxgmii-optional.patch
060-09-net-mediatek-don-t-enable-GDMA-cpu-bridge-unconditio.patch
060-10-net-mediatek-fix-usability-with-wget-command.patch
061-01-net-mediatek-split-ethernet-switch-code-from-mtk_eth.patch
061-02-net-mediatek-add-support-for-MediaTek-MT7987-SoC.patch
061-03-net-mediatek-add-support-for-Airoha-AN8855-ethernet-.patch
070-01-board-mediatek-mt7622-remove-board_late_init.patch
070-02-clk-mediatek-fix-uninitialized-fields-issue-in-INFRA.patch
070-03-configs-mt7629-move-image-load-address-to-0x42000000.patch
070-04-configs-mt7988-move-image-load-address-to-0x44000000.patch
070-05-spi-mtk_spim-add-support-to-use-DT-live-tree.patch
070-06-spi-mtk_spim-check-slave-device-mode-in-spi-mem-s-su.patch
070-07-arm-dts-mediatek-add-quad-mode-capabilities-for-SPI-.patch
070-08-pwm-mediatek-add-pwm3-support-for-mt7981.patch
070-09-pci-mediatek-add-support-for-multiple-ports-in-media.patch
070-10-arm-dts-mediatek-add-pcie-support-for-mt7988.patch
070-11-arm-dts-medaitek-fix-internal-switch-link-speed-of-m.patch
070-12-arm-dts-mediatek-add-support-for-all-three-GMACs-for.patch
070-13-arm-dts-medaitek-add-flash-interface-driving-setting.patch
070-14-arm-dts-mediatek-update-mt7981-mmc-node.patch
070-15-MAINTAINERS-update-file-list-for-MediaTek-ARM-platfo.patch
071-01-pinctrl-mediatek-update-mt7981-pinctrl-driver-based-.patch
100-18-board-mt7629-add-support-for-booting-from-SPI-NAND.patch
290-mt7981-add-USB-nodes.patch
Refreshed all the patches needing it.
Run-tested: GatoNetworks GDSP, Arcadyan Mozart (ynezz),
Zbt WG3526 (dangowrt)
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [patch refresh, Mozart testing]
Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased, tested on MT7621]
2025-05-31 21:16:41 +02:00
Shiji Yang
3d8d807373
uboot-mediatek: move custom uart config symbol to board defconfigs
...
This helps to solve the issue of waiting for "SERIAL_RX_BUFFER_SIZE"
input when enabling verbose log output option (V=s).
Fixes: https://github.com/openwrt/openwrt/issues/18036
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/18043
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-03-15 12:50:57 +01:00
Shiji Yang
4be1bab9ed
uboot-mediatek: move default env files to a dedicated directory
...
Putting all files in the root folder is too messy.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2025-02-09 22:01:21 +00:00
Shiji Yang
10b16d9328
uboot-mediatek: update to v2025.01
...
Remove upstreamed patches:
010-menu-fix-the-logic-checking-whether-ESC-key-is-press.patch [1]
011-menu-add-support-to-check-if-menu-needs-to-be-reprin.patch [2]
012-bootmenu-add-reprint-check.patch [3]
Remove outdated patches:
455-arm-provide-noncached_set_region-prototype-to-fix-build.patch
Some patches have been manually rebased to match the upstream
changes. This patch also fixes the dtc warning for reserved-memory
dts node. If #address-cells and #size-cells are not same as the
root node definitions, the dtc will complain about it.
All defconfigs are refreshed by `make "$board"_defconfig` and
`make savedefconfig`.
[1] ddac69885eccdd7948e2599652cff1
2025-02-09 21:50:58 +00:00
Daniel Golle
f8c22c9bff
uboot-mediatek: update to U-Boot 2024.10
...
Update to latest U-Boot release.
Patches refreshed and fixed when needed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-13 03:00:45 +01:00
Shiji Yang
a40e0c7529
uboot-mediatek: refresh device defconfig files
...
It seems that most of them are manually modified. However, we can
use `make savedefconfig` to generate a clean defconfig file.
Refreshed by:
```
Boards=(
mt7623n_bpir2_defconfig \
mt7623a_unielec_u7623_02_defconfig \
mt7622_bananapi_bpi-r64-sdmmc_defconfig \
mt7622_bananapi_bpi-r64-emmc_defconfig \
mt7622_bananapi_bpi-r64-snand_defconfig \
mt7622_linksys_e8450_defconfig \
mt7622_ubnt_unifi-6-lr-v1_defconfig \
mt7622_ubnt_unifi-6-lr-v2_defconfig \
mt7622_ubnt_unifi-6-lr-v3_defconfig \
ravpower-rp-wd009-ram_defconfig \
mt7621_zbtlink_zbt-wg3526-16m_defconfig \
mt7986_netcore_n60_defconfig \
mt7986a_bpi-r3-emmc_defconfig \
mt7986a_bpi-r3-nor_defconfig \
mt7986a_bpi-r3-sd_defconfig \
mt7986a_bpi-r3-snand_defconfig \
mt7986_xiaomi_redmi-ax6000_defconfig \
mt7986_tplink_tl-xdr4288_defconfig \
mt7986_tplink_tl-xdr6086_defconfig \
mt7986_tplink_tl-xdr6088_defconfig \
mt7981_qihoo-360t7_defconfig \
mt7981_xiaomi_mi-router-wr30u_defconfig \
mt7981_h3c_magic-nx30-pro_defconfig \
mt7986a_glinet_gl-mt6000_defconfig \
mt7981_cmcc_rax3000m-emmc_defconfig \
mt7981_cmcc_rax3000m-nand_defconfig \
mt7981_jcg_q30-pro_defconfig \
mt7986_zyxel_ex5601-t0_defconfig \
mt7981_xiaomi_mi-router-ax3000t_defconfig \
mt7986a_jdcloud_re-cp-03_defconfig \
mt7986a_bpi-r3-mini-emmc_defconfig \
mt7986a_bpi-r3-mini-snand_defconfig \
mt7981_nokia_ea0326gmp_defconfig \
mt7988a_bananapi_bpi-r4-emmc_defconfig \
mt7988a_bananapi_bpi-r4-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-snand_defconfig \
mt7988a_bananapi_bpi-r4-poe-emmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-snand_defconfig \
mt7622_xiaomi_redmi-router-ax6s-ubi-loader_defconfig \
mt7981_openwrt-one-nor_defconfig \
mt7981_openwrt-one-spi-nand_defconfig \
)
for Board in ${Boards[@]}
do
echo "Refresh board ${Board}"
make ${Board}
make savedefconfig
cat ./defconfig > ./configs/${Board}
done
```
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-07-14 16:29:49 +01:00
Shiji Yang
6951526792
uboot-mediatek: update to U-Boot release v2024.07
...
1. Rename function _do_env_set() to env_do_env_set().
2. Replace kwbimage hack with UBOOT_CUSTOMIZE_CONFIG:
"--disable TOOLS_KWBIMAGE" and "--disable TOOLS_LIBCRYPTO".
3. Disable CONFIG_CMD_BOOTEFI_BOOTMGR for all supported devices
because the newly added UEFI bootmenu entries doesn't work.
4. Enable CONFIG_VERSION_VARIABLE for the OpenWrt One.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Co-authored-by: Daniel Golle <daniel@makrotopia.org>
2024-07-14 16:29:49 +01:00
Daniel Golle
efa71c532e
uboot-mediatek: add 'rootwait' to bootargs where needed
...
Probing of the fitblk driver in some situations happens after Linux
attempts to mount rootfs, which then fails.
Always use 'rootwait' kernel parameter when using fitblk for rootfs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-09 13:59:58 +00:00
Daniel Golle
f08e63bd83
uboot-mediatek: remove rootfs_data before attempting to replace fip
...
Make sure there is enough space to replace 'fip' volume and always
remove rootfs_data before.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-01 00:59:49 +00:00
Daniel Golle
f96289ddff
uboot-mediatek: bpi-r3-mini: fix typo in bootmenu
...
Fix typo in eMMC bootmenu.
Fixes: bc25519f98
2024-02-16 13:56:01 +00:00
Daniel Golle
ae1c0f1b15
mediatek: filogic: bpi-r3-mini: fix NAND flash layout
...
Fix NAND flash layout which was out-of-sync with the definition in
ARM TrustedFirmware-A which expects UBI to start at 0x200000.
Fixes: b03d3644cf
2024-02-16 05:40:14 +00:00
Daniel Golle
bc25519f98
uboot-mediatek: add builds for BananaPi BPi-R3 mini
...
The R3 mini comes with two Airoha EN8811H PHYs for 2.5G Ethernet.
The driver added to U-Boot expects the firmware for the PHY to be
stored inside UBI volume en8811h-fw or MMC boot1 hardware partition.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-02-15 19:30:08 +00:00
