Enrico Mioso
2a32d215ba
uboot-mediatek: bump to v2025.04
...
The following upstreamed / superseded patches were dropped:
060-01-clk-mediatek-mt7629-fix-parent-clock-of-some-top-clo.patch
060-02-arm-dts-mt7629-fix-sgmii-clock-selection-for-etherne.patch
060-03-net-mediatek-use-correct-register-field-for-SGMII-sp.patch
060-04-net-mediatek-correct-register-name-of-ethsys-syscfg1.patch
060-05-net-mediatek-fix-sgmii-selection-for-mt7622.patch
060-06-net-mediatek-fix-gmac2-usability-for-mt7629.patch
060-07-net-mediatek-add-support-for-10GBASE-R.patch
060-08-net-mediatek-make-sgmii-usxgmii-optional.patch
060-09-net-mediatek-don-t-enable-GDMA-cpu-bridge-unconditio.patch
060-10-net-mediatek-fix-usability-with-wget-command.patch
061-01-net-mediatek-split-ethernet-switch-code-from-mtk_eth.patch
061-02-net-mediatek-add-support-for-MediaTek-MT7987-SoC.patch
061-03-net-mediatek-add-support-for-Airoha-AN8855-ethernet-.patch
070-01-board-mediatek-mt7622-remove-board_late_init.patch
070-02-clk-mediatek-fix-uninitialized-fields-issue-in-INFRA.patch
070-03-configs-mt7629-move-image-load-address-to-0x42000000.patch
070-04-configs-mt7988-move-image-load-address-to-0x44000000.patch
070-05-spi-mtk_spim-add-support-to-use-DT-live-tree.patch
070-06-spi-mtk_spim-check-slave-device-mode-in-spi-mem-s-su.patch
070-07-arm-dts-mediatek-add-quad-mode-capabilities-for-SPI-.patch
070-08-pwm-mediatek-add-pwm3-support-for-mt7981.patch
070-09-pci-mediatek-add-support-for-multiple-ports-in-media.patch
070-10-arm-dts-mediatek-add-pcie-support-for-mt7988.patch
070-11-arm-dts-medaitek-fix-internal-switch-link-speed-of-m.patch
070-12-arm-dts-mediatek-add-support-for-all-three-GMACs-for.patch
070-13-arm-dts-medaitek-add-flash-interface-driving-setting.patch
070-14-arm-dts-mediatek-update-mt7981-mmc-node.patch
070-15-MAINTAINERS-update-file-list-for-MediaTek-ARM-platfo.patch
071-01-pinctrl-mediatek-update-mt7981-pinctrl-driver-based-.patch
100-18-board-mt7629-add-support-for-booting-from-SPI-NAND.patch
290-mt7981-add-USB-nodes.patch
Refreshed all the patches needing it.
Run-tested: GatoNetworks GDSP, Arcadyan Mozart (ynezz),
Zbt WG3526 (dangowrt)
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [patch refresh, Mozart testing]
Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased, tested on MT7621]
2025-05-31 21:16:41 +02:00
Shiji Yang
3d8d807373
uboot-mediatek: move custom uart config symbol to board defconfigs
...
This helps to solve the issue of waiting for "SERIAL_RX_BUFFER_SIZE"
input when enabling verbose log output option (V=s).
Fixes: https://github.com/openwrt/openwrt/issues/18036
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/18043
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-03-15 12:50:57 +01:00
Shiji Yang
4be1bab9ed
uboot-mediatek: move default env files to a dedicated directory
...
Putting all files in the root folder is too messy.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2025-02-09 22:01:21 +00:00
Shiji Yang
10b16d9328
uboot-mediatek: update to v2025.01
...
Remove upstreamed patches:
010-menu-fix-the-logic-checking-whether-ESC-key-is-press.patch [1]
011-menu-add-support-to-check-if-menu-needs-to-be-reprin.patch [2]
012-bootmenu-add-reprint-check.patch [3]
Remove outdated patches:
455-arm-provide-noncached_set_region-prototype-to-fix-build.patch
Some patches have been manually rebased to match the upstream
changes. This patch also fixes the dtc warning for reserved-memory
dts node. If #address-cells and #size-cells are not same as the
root node definitions, the dtc will complain about it.
All defconfigs are refreshed by `make "$board"_defconfig` and
`make savedefconfig`.
[1] ddac69885eccdd7948e2599652cff1
2025-02-09 21:50:58 +00:00
Shiji Yang
a40e0c7529
uboot-mediatek: refresh device defconfig files
...
It seems that most of them are manually modified. However, we can
use `make savedefconfig` to generate a clean defconfig file.
Refreshed by:
```
Boards=(
mt7623n_bpir2_defconfig \
mt7623a_unielec_u7623_02_defconfig \
mt7622_bananapi_bpi-r64-sdmmc_defconfig \
mt7622_bananapi_bpi-r64-emmc_defconfig \
mt7622_bananapi_bpi-r64-snand_defconfig \
mt7622_linksys_e8450_defconfig \
mt7622_ubnt_unifi-6-lr-v1_defconfig \
mt7622_ubnt_unifi-6-lr-v2_defconfig \
mt7622_ubnt_unifi-6-lr-v3_defconfig \
ravpower-rp-wd009-ram_defconfig \
mt7621_zbtlink_zbt-wg3526-16m_defconfig \
mt7986_netcore_n60_defconfig \
mt7986a_bpi-r3-emmc_defconfig \
mt7986a_bpi-r3-nor_defconfig \
mt7986a_bpi-r3-sd_defconfig \
mt7986a_bpi-r3-snand_defconfig \
mt7986_xiaomi_redmi-ax6000_defconfig \
mt7986_tplink_tl-xdr4288_defconfig \
mt7986_tplink_tl-xdr6086_defconfig \
mt7986_tplink_tl-xdr6088_defconfig \
mt7981_qihoo-360t7_defconfig \
mt7981_xiaomi_mi-router-wr30u_defconfig \
mt7981_h3c_magic-nx30-pro_defconfig \
mt7986a_glinet_gl-mt6000_defconfig \
mt7981_cmcc_rax3000m-emmc_defconfig \
mt7981_cmcc_rax3000m-nand_defconfig \
mt7981_jcg_q30-pro_defconfig \
mt7986_zyxel_ex5601-t0_defconfig \
mt7981_xiaomi_mi-router-ax3000t_defconfig \
mt7986a_jdcloud_re-cp-03_defconfig \
mt7986a_bpi-r3-mini-emmc_defconfig \
mt7986a_bpi-r3-mini-snand_defconfig \
mt7981_nokia_ea0326gmp_defconfig \
mt7988a_bananapi_bpi-r4-emmc_defconfig \
mt7988a_bananapi_bpi-r4-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-snand_defconfig \
mt7988a_bananapi_bpi-r4-poe-emmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-snand_defconfig \
mt7622_xiaomi_redmi-router-ax6s-ubi-loader_defconfig \
mt7981_openwrt-one-nor_defconfig \
mt7981_openwrt-one-spi-nand_defconfig \
)
for Board in ${Boards[@]}
do
echo "Refresh board ${Board}"
make ${Board}
make savedefconfig
cat ./defconfig > ./configs/${Board}
done
```
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-07-14 16:29:49 +01:00
Shiji Yang
6951526792
uboot-mediatek: update to U-Boot release v2024.07
...
1. Rename function _do_env_set() to env_do_env_set().
2. Replace kwbimage hack with UBOOT_CUSTOMIZE_CONFIG:
"--disable TOOLS_KWBIMAGE" and "--disable TOOLS_LIBCRYPTO".
3. Disable CONFIG_CMD_BOOTEFI_BOOTMGR for all supported devices
because the newly added UEFI bootmenu entries doesn't work.
4. Enable CONFIG_VERSION_VARIABLE for the OpenWrt One.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Co-authored-by: Daniel Golle <daniel@makrotopia.org>
2024-07-14 16:29:49 +01:00
Jianhui Zhao
4536fb4c5c
uboot-mediatek: fix typo in bootmenu for GL-MT6000
...
Fixes: fe10f97
2023-10-20 18:13:57 +02:00
Jianhui Zhao
fe10f97439
filogic: add support for GL.iNet GL-MT6000
...
Hardware specification:
* SoC: MediaTek MT7986A 4x A53
* Flash: 8GB EMMC
* RAM: 1GB DDR4
* Ethernet:
* 2x2.5G RJ45 port (RTL8221B)
* 4x1G RJ45 ports (MT7531AE)
* WLAN:
* 2.4GHz: MT7976GN 4T4R
* 5GHz: MT7976AN 4T4R
* Button: Reset
* LED: 1 x dual color LED
* USB: 1 x USB 3.0
* Power: DC 12V 4A
* UART: 3V3 115200 8N1 (Pinout: GND TX RX VCC)
* JTAG: 9 PIN
If you want to use u-boot from OpenWrt, you can upgrade it safely.
* bl2: openwrt-mediatek-filogic-glinet_gl-mt6000-preloader.bin
* fip: openwrt-mediatek-filogic-glinet_gl-mt6000-bl31-uboot.fip
`openwrt-mediatek-filogic-glinet_gl-mt6000-squashfs-factory.bin` is used in OpenWrt's u-boot.
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
2023-09-29 00:18:26 +01:00
