51 lines
No EOL
1.5 KiB
Markdown
51 lines
No EOL
1.5 KiB
Markdown
# AT Sender
|
|
|
|
The `at_sender` program is a simple command-line tool written in Rust, designed to send AT commands to 4G/5G modems on embedded devices. It is intended to be used as a diagnostic tool for testing the modem's AT command interface.
|
|
|
|
## Requirements
|
|
|
|
- Rust 1.41 or later
|
|
- Access to a serial device
|
|
- Linux operating system (for the provided build commands)
|
|
|
|
## Installation
|
|
|
|
Clone the repository and navigate into the project directory:
|
|
|
|
```bash
|
|
git clone https://git.difuse.io/Difuse/at-sender.git
|
|
cd at-sender
|
|
```
|
|
|
|
For easy native builds, use the following command:
|
|
|
|
```bash
|
|
cargo build --release
|
|
```
|
|
|
|
Compiling for other targets is also possible, but requires additional setup (You are on your own for this one), here's a great docker container that you can use to build for `aarch64-musl`:
|
|
|
|
```bash
|
|
docker run --rm -v $(pwd):/home/rust/src messense/rust-musl-cross:aarch64-musl cargo build --release
|
|
```
|
|
|
|
## Usage
|
|
|
|
```
|
|
./at_sender --port /dev/ttyUSB2 --baud 115200 --data 8 --stop 1 --cmd "AT" --buf 32
|
|
```
|
|
|
|
### Flags
|
|
|
|
* `--port`: The serial port to connect to (default "/dev/ttyUSB2")
|
|
* `--baud`: The baud rate (default 115200)
|
|
* `--data`: The number of data bits (default 8)
|
|
* `--stop`: The number of stop bits (default 1)
|
|
* `--cmd`: The command to send to the serial device (default "AT")
|
|
* `--buf`: The buffer size for reading from the serial device (default 4)
|
|
|
|
The flags can be specified in any order. If a flag is omitted, the default value will be used.
|
|
|
|
## License
|
|
|
|
GPL-3.0 |