This makes sure that all Colibri iMX7 modules work with the same timing. The changes are: - Disable ODT on read (JEDEC standard JESD79-3F says in chapter 5.2.3 ODT during Reads: "As the DDR3 SDRAM can not terminate and drive at the same time, RTT must be disabled at least half a clock cycle..." and also MX7D SABRESD is disabling it) This alone fixed memory issues for two Colibri iMX7 1GB modules which showed issues before - Make sure tRFC(min) is at least 260ns - Make sure tRC is >50.625ns - tRP needs to be >13.125ns, we can lower from 18.75ns to 15ns - tFAW is not relevant, leave at reset Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> |
||
---|---|---|
.. | ||
apalis-tk1 | ||
apalis_imx6 | ||
apalis_t30 | ||
colibri-imx6ull | ||
colibri_imx6 | ||
colibri_imx7 | ||
colibri_pxa270 | ||
colibri_t20 | ||
colibri_t30 | ||
colibri_vf | ||
common |