d5ebc937c9
Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
90 lines
2.6 KiB
C
90 lines
2.6 KiB
C
/*
|
|
* (C) Copyright 2010-2012
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/sizes.h>
|
|
#include "tegra2-common.h"
|
|
|
|
/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
|
|
#define CONFIG_DEFAULT_DEVICE_TREE tegra2-whistler
|
|
#define CONFIG_OF_CONTROL
|
|
#define CONFIG_OF_SEPARATE
|
|
|
|
/* High-level configuration options */
|
|
#define TEGRA2_SYSMEM "mem=512M@0M"
|
|
#define V_PROMPT "Tegra2 (Whistler) # "
|
|
#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Whistler"
|
|
|
|
/* Board-specific serial config */
|
|
#define CONFIG_SERIAL_MULTI
|
|
#define CONFIG_TEGRA2_ENABLE_UARTA
|
|
#define CONFIG_TEGRA2_UARTA_UAA_UAB
|
|
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
|
|
#define CONFIG_SYS_BOARD_ODMDATA 0x2B080105 /* lp?, 512MB, UARTA */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
/* I2C */
|
|
#define CONFIG_TEGRA_I2C
|
|
#define CONFIG_SYS_I2C_INIT_BOARD
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
#define CONFIG_SYS_MAX_I2C_BUS 4
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_CMD_I2C
|
|
|
|
/* SD/MMC */
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_TEGRA2_MMC
|
|
#define CONFIG_CMD_MMC
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
|
|
/* Environment not stored */
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
|
|
/* USB Host support */
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_TEGRA
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_SMSC95XX
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_SMSC95XX
|
|
#define CONFIG_USB_ETHER_ASIX
|
|
|
|
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
|
#define CONFIG_CMD_NFS /* NFS support */
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
|
|
#endif /* __CONFIG_H */
|