3b97152b63
This patch uses the code in omap-common to support gpio modules 1-3 on am33xx based boards. It adds base address and register definitions, enables clocks to the modules, and enables building the common gpio code for CONFIG_AM33XX as well as CONFIG_OMAP Signed-off-by: Steve Sakoman <steve@sakoman.com>
128 lines
3.1 KiB
C
128 lines
3.1 KiB
C
/*
|
|
* board.c
|
|
*
|
|
* Common board functions for AM33XX based boards
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/common_def.h>
|
|
#include <asm/io.h>
|
|
#include <asm/omap_common.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
|
|
struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
|
|
struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
|
|
|
|
static const struct gpio_bank gpio_bank_am33xx[4] = {
|
|
{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
|
|
{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
|
|
{ (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
|
|
{ (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
|
|
};
|
|
|
|
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
|
|
|
|
/* UART Defines */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define UART_RESET (0x1 << 1)
|
|
#define UART_CLK_RUNNING_MASK 0x1
|
|
#define UART_SMART_IDLE_EN (0x1 << 0x3)
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* Initialize timer */
|
|
static void init_timer(void)
|
|
{
|
|
/* Reset the Timer */
|
|
writel(0x2, (&timer_base->tscir));
|
|
|
|
/* Wait until the reset is done */
|
|
while (readl(&timer_base->tiocp_cfg) & 1)
|
|
;
|
|
|
|
/* Start the Timer */
|
|
writel(0x1, (&timer_base->tclr));
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* early system init of muxing and clocks.
|
|
*/
|
|
void s_init(void)
|
|
{
|
|
/* WDT1 is already running when the bootloader gets control
|
|
* Disable it to avoid "random" resets
|
|
*/
|
|
writel(0xAAAA, &wdtimer->wdtwspr);
|
|
while (readl(&wdtimer->wdtwwps) != 0x0)
|
|
;
|
|
writel(0x5555, &wdtimer->wdtwspr);
|
|
while (readl(&wdtimer->wdtwwps) != 0x0)
|
|
;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* Setup the PLLs and the clocks for the peripherals */
|
|
pll_init();
|
|
|
|
/* UART softreset */
|
|
u32 regVal;
|
|
|
|
enable_uart0_pin_mux();
|
|
|
|
regVal = readl(&uart_base->uartsyscfg);
|
|
regVal |= UART_RESET;
|
|
writel(regVal, &uart_base->uartsyscfg);
|
|
while ((readl(&uart_base->uartsyssts) &
|
|
UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
|
|
;
|
|
|
|
/* Disable smart idle */
|
|
regVal = readl(&uart_base->uartsyscfg);
|
|
regVal |= UART_SMART_IDLE_EN;
|
|
writel(regVal, &uart_base->uartsyscfg);
|
|
|
|
/* Initialize the Timer */
|
|
init_timer();
|
|
|
|
preloader_console_init();
|
|
|
|
config_ddr();
|
|
#endif
|
|
|
|
/* Enable MMC0 */
|
|
enable_mmc0_pin_mux();
|
|
}
|
|
|
|
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return omap_mmc_init(0, 0, 0);
|
|
}
|
|
#endif
|
|
|
|
void setup_clocks_for_console(void)
|
|
{
|
|
/* Not yet implemented */
|
|
return;
|
|
}
|