Poonam Aggrwal 87c7661b42 85xx: Added P1020 Processor Support. ... P1020 is another member of QorIQ series of processors which falls in ULE category. It is an e500 based dual core SOC. Being a scaled down version of P2020 it has following differences: - 533MHz - 800MHz core frequency. - 256Kbyte L2 cache - Ethernet controllers with classification capabilities. Also the SOC is pin compatible with P2020 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>		2009-08-28 17:12:39 -05:00
..
4xx_pci.h
4xx_pcie.h
5xx_immap.h
8xx_immap.h
atomic.h
bitops.h
byteorder.h
cache.h	85xx: Add basic e500mc core support	2008-10-24 15:10:47 -05:00
config.h	8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx	2009-08-28 17:12:38 -05:00
cpm_85xx.h
cpm_8260.h	POWERPC 82xx: add the SCC as an HDLC controller	2009-01-24 00:42:04 +01:00
e300.h	powerpc: Move duplicated BAT defines to mmu.h	2009-02-10 00:27:40 +01:00
errno.h	asm-generic: Consolidate errno.h to asm-generic/errno.h	2009-07-09 14:07:11 +02:00
fsl_ddr_dimm_params.h	fsl-ddr: add the DDR3 SPD infrastructure	2009-03-30 13:33:50 -05:00
fsl_ddr_sdram.h	fsl-ddr: add the DDR3 SPD infrastructure	2009-03-30 13:33:50 -05:00
fsl_dma.h	83xx: Add support for fsl_dma driver	2009-07-02 11:15:57 -05:00
fsl_i2c.h
fsl_law.h	mpc85xx: Add support for the P2020	2009-02-16 18:05:55 -06:00
fsl_lbc.h	83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x	2009-06-12 20:47:17 +02:00
fsl_pci.h	pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_init	2009-08-28 17:12:35 -05:00
fsl_serdes.h	mpc83xx: serdes: add forgotten shifts for rfcks	2008-10-21 18:34:01 -05:00
global_data.h	85xx: Add support for P2020RDB board	2009-08-28 17:12:38 -05:00
gpio.h	ppc4xx: Add struct for 4xx GPIO controller registers	2009-07-24 06:47:33 +02:00
immap_83xx.h	usb: mpc834x: added support of the MPH USB controller in addition to the DR one	2009-07-14 14:53:52 -05:00
immap_85xx.h	85xx: Adds GPIO registers to MPC85xx Memory Map.	2009-07-02 08:33:20 -05:00
immap_86xx.h	86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fields	2009-07-22 09:43:47 -05:00
immap_512x.h	MPC512x: Add MSCAN1...4 Clock Control Registers	2009-07-14 00:01:32 +02:00
immap_8220.h
immap_8260.h
immap_qe.h	drivers/qe: Add more SNUM number for QE	2009-06-12 17:17:00 -05:00
interrupt.h
io.h	ppc: Use addrmap in virt_to_phys and map_physmem.	2008-12-19 18:20:08 -06:00
iopin_8xx.h
iopin_85xx.h
iopin_8260.h
m8260_pci.h
mc146818rtc.h
mmu.h	mpc86xx: Add support to populate addr map based on BATs	2009-02-10 00:29:49 +01:00
mp.h	Update CHANGELOG, coding style cleanup.	2009-04-05 00:27:57 +02:00
mpc8xxx_spi.h	83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x	2009-06-12 20:47:17 +02:00
mpc512x.h	MPC512x: factor out common code	2009-07-14 00:02:41 +02:00
mpc8349_pci.h
pci_io.h
pnp.h
posix_types.h
ppc4xx-ebc.h	ppc4xx: Correctly setup ranges property in ebc node	2008-10-21 17:35:02 +02:00
ppc4xx-isram.h	ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs	2008-11-21 10:52:33 +01:00
ppc4xx-sdram.h	ppc4xx: Autocalibration can set RDCC to over aggressive value.	2009-02-12 06:08:07 +01:00
ppc4xx-uic.h
ppc4xx_config.h	Add "chip_config" command for PPC4xx bootstrap configuration	2009-07-24 06:42:32 +02:00
processor.h	85xx: Added P1020 Processor Support.	2009-08-28 17:12:39 -05:00
ptrace.h
residual.h
sigcontext.h
signal.h
status_led.h
string.h
types.h	Replace __attribute references with __attribute__	2009-04-28 01:01:39 +02:00
u-boot.h	83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx	2009-06-12 20:47:17 +02:00
unaligned.h	Add LZO decompressor support	2009-03-20 22:39:15 +01:00
xilinx_irq.h