Sometimes if the first byte of xmodem packet (SOH) is incorrectly
transmitted, BootROM sends NAK for every non-SOH received byte, which
makes BootROM and the host kwboot tool out of sync. BootROM automatically
re-synchronizes after 2s pause by dropping its input queue. So when
attempting retransmit for 9th time or later, ignore NAK reply from BootROM
and either wait for valid ACK or let kwboot timeout, which implies
re-synchronization.
This fixes retransmission of xmodem packets and allows kwboot to work also
without "Waiting ... and flushing tty" code which is at the beginning of
kwboot xmodem transfer.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Use the blk_rsp_timeo variable when sleeping before flushing tty.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Fix xmodem retry mechanism if some bytes from xmodem packet were lost and
BootROM is still waiting for completing previous xmodem packet.
It is required to wait at least 1.312s on A385, otherwise BootROM does not
accept next xmodem packet if previous one was not completely transferred.
2s should be enough timeout cause that BootROM will drop incomplete xmodem
packet and expects new packet.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
a bit delayed, the first batch of the sunxi pull request for this cycle.
This is mostly collecting some patches that were lying around for a
while, plus some recent fixes. Nothing too exciting at this point, but
of course they should be merged nevertheless.
There is the much bigger F1C100s SoC support coming up, which I hope to
be able to send in the next few days, along with the removal of sunxi's
lowlevel_init usage.
Compile tested for all 159 sunxi boards, plus briefly tested on BananaPi
M1, OrangePi Zero, Pine64 and Pine-H64.
Due to a bug in the H3 SoC, where the CPU 0 hotplug flag cannot be
written, resuming CPU 0 requires using the "Super Standby" code path in
the BROM instead of the hotplug path. This path requires jumping to an
eGON image in SRAM.
This resume image, whose single purpose is to jump back to the secure
monitor, only needs to contain a single instruction. Padding the image
to 8 KiB would be wasteful of SRAM. Hook up the -B (block size) option
so users can set the block/padding size.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Documentation:
* update Nokia RX-51 documentation and move it to rst
* describe boot switch settings for HiFive Unmatched board
UEFI:
* fix the checking of images hashes and signatures
* provide the RISCV_EFI_BOOT_PROTOCOL
-----BEGIN PGP SIGNATURE-----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=+edp
-----END PGP SIGNATURE-----
Merge tag 'efi-2022-04-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2022-04-rc1-3
Documentation:
* update Nokia RX-51 documentation and move it to rst
* describe boot switch settings for HiFive Unmatched board
UEFI:
* fix the checking of images hashes and signatures
* provide the RISCV_EFI_BOOT_PROTOCOL
Abstract common routines to make the code easily understandable.
No functional change.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
All the error messages should be printed out to stderr.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add to support rsa 3072 bits algorithm in tools
for image sign at host side and adds rsa 3072 bits
verification in the image binary.
Add test case in vboot for sha384 with rsa3072 algorithm testing.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At present mkimage displays the node information but it is not clear what
signing action was taken. Add a message that shows it. For now it only
supports showing a single signing action, since that is the common case.
Sample:
Signature written to 'sha1-basic/test.fit',
node '/configurations/conf-1/signature'
Public key written to 'sha1-basic/sandbox-u-boot.dtb',
node '/signature/key-dev'
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the two functions that call add_verify_data() so that the caller
can see the node that was written to.
Signed-off-by: Simon Glass <sjg@chromium.org>
The copyfile() implementation has strange behaviour if the destination
file already exists. Update it to ensure that any existing data in the
destination file is dropped.
Signed-off-by: Simon Glass <sjg@chromium.org>
Each bintool has some documentation which can be useful for the user.
Add a new command that collects this and writes it into a .rst file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Drop the unused gzip code, update comments and add a test for an
invalid algorithm. The temporary file is not needed now, so drop that
also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Bintools can be missing, in which case binman continues operation but
reports an invalid image. Plumb in support for this and add tests for
entry types which use bintools.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the code to use this bintool, instead of running lzma_alone
directly. This simplifies the code and provides more consistency.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to compress and decompress data.
It supports the features needed by binman as well as installing via the
lzma-alone package.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the code to use this bintool, instead of running lz4 directly. This
simplifies the code and provides more consistency.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to compress and decompress data.
It supports the features needed by binman as well as installing via the
lz4 package.
Signed-off-by: Simon Glass <sjg@chromium.org>
The compression functions are not actually used by patman, so we don't
need then in the tools module. Also we want to change them to use
bintools, which patman will not support.
Move these into a new comp_util module, within binman.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the fit and mkimage entry types to use this bintool, instead of
running mkimage directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the ifwi entry type to use this bintool, instead of running
ifwitool directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the GBB and vblock entry types to use this bintool, instead of
running futility directly. This simplifies the code and provides more
consistency as well as supporting missing bintools.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the FIP tests to use this bintool, instead of running fiptool
directly. This simplifies the code and provides more consistency as well
as supporting missing bintools.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the CBFS tests to use this bintool, instead of running cbfstool
directly. This simplifies the overall code and provides more consistency,
as well as supporting missing bintools.
Signed-off-by: Simon Glass <sjg@chromium.org>
The tests rely on having at least 5 bintool implementions. Now that we
have this, enable them. Add tests for the binman 'tool' subcommand.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to build images for use by U-Boot.
It supports the features needed by binman as well as installing via the
u-boot-tools packages. Although this is built in the U-Boot tree, it is
still useful to install a binary on the system.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to build Intel IFWI images. It
supports the features needed by the tests as well as downloading a binary
from Google Drive. Although this is built in the U-Boot tree, it is not
currently included with u-boot-tools, so it may be useful to install a
binary on the system.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to sign Chrome OS images and
build the Google Binary Block (GBB). It supports the features needed by
binman as well as fetching a binary from Google Drive. Building it from
source is possible but is left for another time, as it requires at least
one other library.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to run FIP tests. It supports
the features needed by the tests as well as building a binary from
the git tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Bintool for this, which is used to run CBFS tests. It supports
the features needed by the tests as well as fetching a binary from
Google Drive. Building it from source is very slow since it is not
separately supported by the coreboot build system and it builds an
entire gcc toolchain before starting.
Signed-off-by: Simon Glass <sjg@chromium.org>
Support collecting the available bintools needed by an image, by
scanning the entries in the image.
Also add a command-line interface to access the basic bintool features,
such as listing the bintools and fetching them if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Binman requires various tools to actually work, such as 'lz4' to compress
data and 'futility' to sign Chrome OS firmware. At present these are
handled in an ad-hoc manner and there is no easy way to find out what
tools are needd to build an image, nor where to obtain them.
Add an implementation of 'bintool', a base class which implements this
functionality. When a bintool is required, it can be requested from this
module, then executed. When the tool is missing, it can provide a way to
obtain it.
Note that this uses Command directly, not the tools.Run() function. This
allows proper handling of missing tools and avoids needing to catch and
re-raise exceptions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Since this is a list of blobs, each blob should have the ability to be
faked, as with blob-ext. Update the Entry base class to set allow_fake
and use the base class in the section code also, so that this propagagtes
to blob-ext-list, which is not a section.
Signed-off-by: Simon Glass <sjg@chromium.org>
The Run() function automatically uses the PATH variable to locate a tool
when running it. Add a function that does this manually, so we don't have
to run a tool to find out if it is present.
This is needed by the new Bintool class, which wants to check which tools
are present.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reverse the order of the return tuple, so that the filename is first.
This seems more obvious than putting the temporary directory first.
Correct a bug that leaves a space on the final line.
Allow the caller to control the name of the temporary directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
