Pull request for u-boot-nand-20230108

- rawnand: omap_gpmc: driver model support
 -----BEGIN PGP SIGNATURE-----
 
 iQJYBAABCgBCFiEE6GOTDNYiFygVXvMmQBtB6IWRjvEFAmO6pUskHGRhcmlvLmJp
 bmFjY2hpQGFtYXJ1bGFzb2x1dGlvbnMuY29tAAoJEEAbQeiFkY7xo+kQAIRCr9c5
 DPOa+yFSFnSrEj6Ci+Csx0+VFef+pzUU3phu5T8HG8bCkKtMmPopau37coFhzty/
 87yQtVJoq5tMWdle8Lwg9SStYTjt2c9Vg6nZvNFaLDWkZm2zLJpgOB6KM+AIEvpG
 PLJ2nVYqwoaZbW3o1eHPescKl3A7vkMuUxIZ/3NJtKOezuqhR42nHyNDaGLMbI2o
 fvm17vc6gh07+ekR06frVOmUdxYbNcfEjCPLgf2fAqkAuBw17TB2akpDuTSYSck5
 QcIZqJeKwCJjCKEzOlXZHktiX3E1CohOcEcPBKlWPvNORokc/ghcHFvvT846FFqE
 VEZb0P/4lkvSCVBCwTbgnKtN1O8mN/lnHVMubQXWyP5ZK7PPn7BzyzOZfCm+Emdm
 41B2H2+3+IRhTY9uYPyPXnyTQ/pDUZ2i7EXIguUAWOaq6GE8w9ICty1c7pxnCG5+
 mm/4nhMrbQzQ7y4Snp1jZTcdvFczuBNFIEsSvOyHagXVCRHJi1/YT4L4t1mvUX5J
 VPnidkrdQFIJpfJadEk/D3E43XXyqKtFpHy1yn1cqqiDd/TIGUmcf9oAkT6wuUZf
 DoQjdRKJnr6nyPVfWF/cQ4c4qcDXvA5TIKztxrb/whaff+2I/vXW2QnV2YX3zyxt
 Ry6YvBOH0xYTWNmQ7uFecjkpeKhb4FrKuUUf
 =Agfn
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-nand-20230108' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next

Pull request for u-boot-nand-20230108

- rawnand: omap_gpmc: driver model support

doc/device-tree-bindings/mtd/ti,elm.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,elm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Error Location Module (ELM).
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  ELM module is used together with GPMC and NAND Flash to detect
+  errors and the location of the error based on BCH algorithms
+  so they can be corrected if possible.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-elm
+      - ti,am64-elm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Functional clock.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with ELM. This is for legacy
+      platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-elm
+    then:
+      required:
+        - clocks
+        - clock-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    elm: ecc@0 {
+        compatible = "ti,am3352-elm";
+        reg = <0x0 0x2000>;
+        interrupts = <4>;
+    };

doc/device-tree-bindings/mtd/ti,gpmc-nand.yaml

@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC NAND Flash controller.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC NAND controller/Flash is represented as a child of the
+  GPMC controller node.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am64-nand
+          - ti,omap2-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for fifoevent
+      - description: Interrupt for termcount
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  ti,nand-ecc-opt:
+    description: Desired ECC algorithm
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [sw, ham1, bch4, bch8, bch16]
+
+  ti,nand-xfer-type:
+    description: Data transfer method between controller and chip.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
+    default: prefetch-polled
+
+  ti,elm-id:
+    description:
+      phandle to the ELM (Error Location Module).
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-bus-width:
+    description:
+      Bus width to the NAND chip
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+
+  rb-gpios:
+    description:
+      GPIO connection to R/B signal from NAND chip
+    maxItems: 1
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: "/schemas/mtd/partitions/partition.yaml"
+
+allOf:
+  - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
+
+required:
+  - compatible
+  - reg
+  - ti,nand-ecc-opt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      clocks = <&l3s_gclk>;
+      clock-names = "fck";
+      reg = <0x50000000 0x2000>;
+      interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+      gpmc,num-cs = <7>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      ranges = <0 0 0x08000000 0x01000000>;   /* CS0 space. Min partition = 16MB */
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;          /* device IO registers */
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* NAND generic properties */
+        nand-bus-width = <8>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;  /* gpmc_wait0 */
+
+        /* GPMC properties*/
+        gpmc,device-width = <1>;
+
+        partition@0 {
+          label = "NAND.SPL";
+          reg = <0x00000000 0x00040000>;
+        };
+        partition@1 {
+          label = "NAND.SPL.backup1";
+          reg = <0x00040000 0x00040000>;
+        };
+      };
+    };

drivers/mtd/nand/raw/Kconfig

@@ -26,6 +26,9 @@ config TPL_SYS_NAND_SELF_INIT
 config TPL_NAND_INIT
 	bool
 
+config SPL_NAND_INIT
+	bool
+
 config SYS_MAX_NAND_DEVICE
 	int "Maximum number of NAND devices to support"
 	default 1
@@ -261,6 +264,9 @@ config NAND_LPC32XX_SLC
 config NAND_OMAP_GPMC
 	bool "Support OMAP GPMC NAND controller"
 	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
+	select SYS_NAND_SELF_INIT if ARCH_K3
+	select SPL_NAND_INIT if ARCH_K3
+	select SPL_SYS_NAND_SELF_INIT if ARCH_K3
 	help
 	  Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
 	  GPMC controller is used for parallel NAND flash devices, and can
@@ -640,7 +646,8 @@ config SYS_NAND_ONFI_DETECTION
 config SYS_NAND_PAGE_COUNT
 	hex "NAND chip page count"
 	depends on SPL_NAND_SUPPORT && (NAND_ATMEL || NAND_MXC || \
-		SPL_NAND_AM33XX_BCH || SPL_NAND_LOAD || SPL_NAND_SIMPLE)
+		SPL_NAND_AM33XX_BCH || SPL_NAND_LOAD || SPL_NAND_SIMPLE || \
+		NAND_OMAP_GPMC)
 	help
 	  Number of pages in the NAND chip.
 

drivers/mtd/nand/raw/Makefile

@@ -18,7 +18,7 @@ obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o nand_amd.o nand_hynix.o \
 				nand_macronix.o nand_micron.o \
 				nand_samsung.o nand_toshiba.o
 obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
-obj-$(CONFIG_TPL_NAND_INIT) += nand.o
+obj-$(CONFIG_$(SPL_TPL_)NAND_INIT) += nand.o
 ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
 obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
 endif

drivers/mtd/nand/raw/nand_base.c

@@ -447,7 +447,10 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	int res, ret = 0;
+	int ret = 0;
+#ifndef CONFIG_SPL_BUILD
+	int res;
+#endif
 
 	if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
 		struct erase_info einfo;
@@ -465,12 +468,14 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
 		nand_release_device(mtd);
 	}
 
+#ifndef CONFIG_SPL_BUILD
 	/* Mark block bad in BBT */
 	if (chip->bbt) {
 		res = nand_markbad_bbt(mtd, ofs);
 		if (!ret)
 			ret = res;
 	}
+#endif
 
 	if (!ret)
 		mtd->ecc_stats.badblocks++;
@@ -517,7 +522,11 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
 	if (!chip->bbt)
 		return 0;
 	/* Return info from the table */
+#ifndef CONFIG_SPL_BUILD
 	return nand_isreserved_bbt(mtd, ofs);
+#else
+	return 0;
+#endif
 }
 
 /**
@@ -543,7 +552,11 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
 		return chip->block_bad(mtd, ofs);
 
 	/* Return info from the table */
+#ifndef CONFIG_SPL_BUILD
 	return nand_isbad_bbt(mtd, ofs, allowbbt);
+#else
+	return 0;
+#endif
 }
 
 /**
@@ -3752,8 +3765,11 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
 		chip->write_byte = busw ? nand_write_byte16 : nand_write_byte;
 	if (!chip->read_buf || chip->read_buf == nand_read_buf)
 		chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+
+#ifndef CONFIG_SPL_BUILD
 	if (!chip->scan_bbt)
 		chip->scan_bbt = nand_default_bbt;
+#endif
 
 	if (!chip->controller) {
 		chip->controller = &chip->hwcontrol;

drivers/mtd/nand/raw/omap_elm.c

@@ -15,9 +15,14 @@
 #include <common.h>
 #include <asm/io.h>
 #include <linux/errno.h>
-#include <linux/mtd/omap_elm.h>
 #include <asm/arch/hardware.h>
 
+#include <dm.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include "omap_elm.h"
+
 #define DRIVER_NAME		"omap-elm"
 #define ELM_DEFAULT_POLY (0)
 
@@ -180,6 +185,7 @@ void elm_reset(void)
 		;
 }
 
+#ifdef ELM_BASE
 /**
  * elm_init - Initialize ELM module
  *
@@ -191,3 +197,33 @@ void elm_init(void)
 	elm_cfg = (struct elm *)ELM_BASE;
 	elm_reset();
 }
+#endif
+
+#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT)
+
+static int elm_probe(struct udevice *dev)
+{
+#ifndef ELM_BASE
+	struct resource res;
+
+	dev_read_resource(dev, 0, &res);
+	elm_cfg = devm_ioremap(dev, res.start, resource_size(&res));
+	elm_reset();
+#endif
+
+	return 0;
+}
+
+static const struct udevice_id elm_ids[] = {
+	{ .compatible = "ti,am3352-elm" },
+	{ .compatible = "ti,am64-elm" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpmc_elm) = {
+	.name           = DRIVER_NAME,
+	.id             = UCLASS_MTD,
+	.of_match       = elm_ids,
+	.probe          = elm_probe,
+};
+#endif /* CONFIG_SYS_NAND_SELF_INIT */

drivers/mtd/nand/raw/omap_elm.h

@@ -74,6 +74,12 @@ int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
 		u32 *error_locations);
 int elm_config(enum bch_level level);
 void elm_reset(void);
+#ifdef ELM_BASE
 void elm_init(void);
+#else
+static inline void elm_init(void)
+{
+}
+#endif
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_ARCH_ELM_H */

drivers/mtd/nand/raw/omap_gpmc.c

@@ -7,6 +7,7 @@
 #include <common.h>
 #include <log.h>
 #include <asm/io.h>
+#include <dm/uclass.h>
 #include <linux/errno.h>
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -19,7 +20,8 @@
 #include <linux/bch.h>
 #include <linux/compiler.h>
 #include <nand.h>
-#include <linux/mtd/omap_elm.h>
+
+#include "omap_elm.h"
 
 #ifndef GPMC_MAX_CS
 #define GPMC_MAX_CS	4
@@ -27,6 +29,9 @@
 
 #define BADBLOCK_MARKER_LENGTH	2
 #define SECTOR_BYTES		512
+#define ECCSIZE0_SHIFT		12
+#define ECCSIZE1_SHIFT		22
+#define ECC1RESULTSIZE		0x1
 #define ECCCLEAR		(0x1 << 8)
 #define ECCRESULTREG1		(0x1 << 0)
 /* 4 bit padding to make byte aligned, 56 = 52 + 4 */
@@ -186,72 +191,35 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat,
 __maybe_unused
 static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
 {
-	struct nand_chip	*nand	= mtd_to_nand(mtd);
+	struct nand_chip *nand = mtd_to_nand(mtd);
-	struct omap_nand_info	*info	= nand_get_controller_data(nand);
+	struct omap_nand_info *info = nand_get_controller_data(nand);
 	unsigned int dev_width = (nand->options & NAND_BUSWIDTH_16) ? 1 : 0;
-	unsigned int ecc_algo = 0;
+	u32 val;
-	unsigned int bch_type = 0;
-	unsigned int eccsize1 = 0x00, eccsize0 = 0x00, bch_wrapmode = 0x00;
-	u32 ecc_size_config_val = 0;
-	u32 ecc_config_val = 0;
-	int cs = info->cs;
 
-	/* configure GPMC for specific ecc-scheme */
-	switch (info->ecc_scheme) {
-	case OMAP_ECC_HAM1_CODE_SW:
-		return;
-	case OMAP_ECC_HAM1_CODE_HW:
-		ecc_algo = 0x0;
-		bch_type = 0x0;
-		bch_wrapmode = 0x00;
-		eccsize0 = 0xFF;
-		eccsize1 = 0xFF;
-		break;
-	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-	case OMAP_ECC_BCH8_CODE_HW:
-		ecc_algo = 0x1;
-		bch_type = 0x1;
-		if (mode == NAND_ECC_WRITE) {
-			bch_wrapmode = 0x01;
-			eccsize0 = 0;  /* extra bits in nibbles per sector */
-			eccsize1 = 28; /* OOB bits in nibbles per sector */
-		} else {
-			bch_wrapmode = 0x01;
-			eccsize0 = 26; /* ECC bits in nibbles per sector */
-			eccsize1 = 2;  /* non-ECC bits in nibbles per sector */
-		}
-		break;
-	case OMAP_ECC_BCH16_CODE_HW:
-		ecc_algo = 0x1;
-		bch_type = 0x2;
-		if (mode == NAND_ECC_WRITE) {
-			bch_wrapmode = 0x01;
-			eccsize0 = 0;  /* extra bits in nibbles per sector */
-			eccsize1 = 52; /* OOB bits in nibbles per sector */
-		} else {
-			bch_wrapmode = 0x01;
-			eccsize0 = 52; /* ECC bits in nibbles per sector */
-			eccsize1 = 0;  /* non-ECC bits in nibbles per sector */
-		}
-		break;
-	default:
-		return;
-	}
 	/* Clear ecc and enable bits */
 	writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
-	/* Configure ecc size for BCH */
-	ecc_size_config_val = (eccsize1 << 22) | (eccsize0 << 12);
-	writel(ecc_size_config_val, &gpmc_cfg->ecc_size_config);
 
-	/* Configure device details for BCH engine */
+	/* program ecc and result sizes */
-	ecc_config_val = ((ecc_algo << 16)	| /* HAM1 | BCHx */
+	val = ((((nand->ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) |
-			(bch_type << 12)	| /* BCH4/BCH8/BCH16 */
+			ECC1RESULTSIZE);
-			(bch_wrapmode << 8)	| /* wrap mode */
+	writel(val, &gpmc_cfg->ecc_size_config);
-			(dev_width << 7)	| /* bus width */
+
-			(0x0 << 4)		| /* number of sectors */
+	switch (mode) {
-			(cs <<  1)		| /* ECC CS */
+	case NAND_ECC_READ:
-			(0x1));			  /* enable ECC */
+	case NAND_ECC_WRITE:
-	writel(ecc_config_val, &gpmc_cfg->ecc_config);
+		writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
+		break;
+	case NAND_ECC_READSYN:
+		writel(ECCCLEAR, &gpmc_cfg->ecc_control);
+		break;
+	default:
+		printf("%s: error: unrecognized Mode[%d]!\n", __func__, mode);
+		break;
+	}
+
+	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+	val = (dev_width << 7) | (info->cs << 1) | (0x1);
+	writel(val, &gpmc_cfg->ecc_config);
 }
 
 /*
@@ -270,6 +238,124 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
  */
 static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 				uint8_t *ecc_code)
+{
+	u32 val;
+
+	val = readl(&gpmc_cfg->ecc1_result);
+	ecc_code[0] = val & 0xFF;
+	ecc_code[1] = (val >> 16) & 0xFF;
+	ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0);
+
+	return 0;
+}
+
+/* GPMC ecc engine settings for read */
+#define BCH_WRAPMODE_1          1       /* BCH wrap mode 1 */
+#define BCH8R_ECC_SIZE0         0x1a    /* ecc_size0 = 26 */
+#define BCH8R_ECC_SIZE1         0x2     /* ecc_size1 = 2 */
+#define BCH4R_ECC_SIZE0         0xd     /* ecc_size0 = 13 */
+#define BCH4R_ECC_SIZE1         0x3     /* ecc_size1 = 3 */
+
+/* GPMC ecc engine settings for write */
+#define BCH_WRAPMODE_6          6       /* BCH wrap mode 6 */
+#define BCH_ECC_SIZE0           0x0     /* ecc_size0 = 0, no oob protection */
+#define BCH_ECC_SIZE1           0x20    /* ecc_size1 = 32 */
+
+/**
+ * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ *
+ * When using BCH with SW correction (i.e. no ELM), sector size is set
+ * to 512 bytes and we use BCH_WRAPMODE_6 wrapping mode
+ * for both reading and writing with:
+ * eccsize0 = 0  (no additional protected byte in spare area)
+ * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd,
+						 int mode)
+{
+	unsigned int bch_type;
+	unsigned int dev_width, nsectors;
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct omap_nand_info *info = nand_get_controller_data(chip);
+	u32 val, wr_mode;
+	unsigned int ecc_size1, ecc_size0;
+
+	/* GPMC configurations for calculating ECC */
+	switch (info->ecc_scheme) {
+	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+		bch_type = 1;
+		nsectors = 1;
+		wr_mode   = BCH_WRAPMODE_6;
+		ecc_size0 = BCH_ECC_SIZE0;
+		ecc_size1 = BCH_ECC_SIZE1;
+		break;
+	case OMAP_ECC_BCH8_CODE_HW:
+		bch_type = 1;
+		nsectors = chip->ecc.steps;
+		if (mode == NAND_ECC_READ) {
+			wr_mode   = BCH_WRAPMODE_1;
+			ecc_size0 = BCH8R_ECC_SIZE0;
+			ecc_size1 = BCH8R_ECC_SIZE1;
+		} else {
+			wr_mode   = BCH_WRAPMODE_6;
+			ecc_size0 = BCH_ECC_SIZE0;
+			ecc_size1 = BCH_ECC_SIZE1;
+		}
+		break;
+	case OMAP_ECC_BCH16_CODE_HW:
+		bch_type = 0x2;
+		nsectors = chip->ecc.steps;
+		if (mode == NAND_ECC_READ) {
+			wr_mode   = 0x01;
+			ecc_size0 = 52; /* ECC bits in nibbles per sector */
+			ecc_size1 = 0;  /* non-ECC bits in nibbles per sector */
+		} else {
+			wr_mode   = 0x01;
+			ecc_size0 = 0;  /* extra bits in nibbles per sector */
+			ecc_size1 = 52; /* OOB bits in nibbles per sector */
+		}
+		break;
+	default:
+		return;
+	}
+
+	writel(ECCRESULTREG1, &gpmc_cfg->ecc_control);
+
+	/* Configure ecc size for BCH */
+	val = (ecc_size1 << ECCSIZE1_SHIFT) | (ecc_size0 << ECCSIZE0_SHIFT);
+	writel(val, &gpmc_cfg->ecc_size_config);
+
+	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+
+	/* BCH configuration */
+	val = ((1			<< 16) | /* enable BCH */
+	       (bch_type		<< 12) | /* BCH4/BCH8/BCH16 */
+	       (wr_mode			<<  8) | /* wrap mode */
+	       (dev_width		<<  7) | /* bus width */
+	       (((nsectors - 1) & 0x7)	<<  4) | /* number of sectors */
+	       (info->cs		<<  1) | /* ECC CS */
+	       (0x1));				 /* enable ECC */
+
+	writel(val, &gpmc_cfg->ecc_config);
+
+	/* Clear ecc and enable bits */
+	writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control);
+}
+
+/**
+ * _omap_calculate_ecc_bch - Generate BCH ECC bytes for one sector
+ * @mtd:        MTD device structure
+ * @dat:        The pointer to data on which ecc is computed
+ * @ecc_code:   The ecc_code buffer
+ * @sector:     The sector number (for a multi sector page)
+ *
+ * Support calculating of BCH4/8/16 ECC vectors for one sector
+ * within a page. Sector number is in @sector.
+ */
+static int _omap_calculate_ecc_bch(struct mtd_info *mtd, const u8 *dat,
+				   u8 *ecc_code, int sector)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct omap_nand_info *info = nand_get_controller_data(chip);
@@ -278,17 +364,11 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 	int8_t i = 0, j;
 
 	switch (info->ecc_scheme) {
-	case OMAP_ECC_HAM1_CODE_HW:
-		val = readl(&gpmc_cfg->ecc1_result);
-		ecc_code[0] = val & 0xFF;
-		ecc_code[1] = (val >> 16) & 0xFF;
-		ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0);
-		break;
 #ifdef CONFIG_BCH
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
 #endif
 	case OMAP_ECC_BCH8_CODE_HW:
-		ptr = &gpmc_cfg->bch_result_0_3[0].bch_result_x[3];
+		ptr = &gpmc_cfg->bch_result_0_3[sector].bch_result_x[3];
 		val = readl(ptr);
 		ecc_code[i++] = (val >>  0) & 0xFF;
 		ptr--;
@@ -300,23 +380,24 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 			ecc_code[i++] = (val >>  0) & 0xFF;
 			ptr--;
 		}
+
 		break;
 	case OMAP_ECC_BCH16_CODE_HW:
-		val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[2]);
+		val = readl(&gpmc_cfg->bch_result_4_6[sector].bch_result_x[2]);
 		ecc_code[i++] = (val >>  8) & 0xFF;
 		ecc_code[i++] = (val >>  0) & 0xFF;
-		val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[1]);
+		val = readl(&gpmc_cfg->bch_result_4_6[sector].bch_result_x[1]);
 		ecc_code[i++] = (val >> 24) & 0xFF;
 		ecc_code[i++] = (val >> 16) & 0xFF;
 		ecc_code[i++] = (val >>  8) & 0xFF;
 		ecc_code[i++] = (val >>  0) & 0xFF;
-		val = readl(&gpmc_cfg->bch_result_4_6[0].bch_result_x[0]);
+		val = readl(&gpmc_cfg->bch_result_4_6[sector].bch_result_x[0]);
 		ecc_code[i++] = (val >> 24) & 0xFF;
 		ecc_code[i++] = (val >> 16) & 0xFF;
 		ecc_code[i++] = (val >>  8) & 0xFF;
 		ecc_code[i++] = (val >>  0) & 0xFF;
 		for (j = 3; j >= 0; j--) {
-			val = readl(&gpmc_cfg->bch_result_0_3[0].bch_result_x[j]
+			val = readl(&gpmc_cfg->bch_result_0_3[sector].bch_result_x[j]
 									);
 			ecc_code[i++] = (val >> 24) & 0xFF;
 			ecc_code[i++] = (val >> 16) & 0xFF;
@@ -329,18 +410,18 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 	}
 	/* ECC scheme specific syndrome customizations */
 	switch (info->ecc_scheme) {
-	case OMAP_ECC_HAM1_CODE_HW:
-		break;
 #ifdef CONFIG_BCH
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
-
+		/* Add constant polynomial to remainder, so that
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
 		for (i = 0; i < chip->ecc.bytes; i++)
-			*(ecc_code + i) = *(ecc_code + i) ^
+			ecc_code[i] ^= bch8_polynomial[i];
-						bch8_polynomial[i];
 		break;
 #endif
 	case OMAP_ECC_BCH8_CODE_HW:
-		ecc_code[chip->ecc.bytes - 1] = 0x00;
+		/* Set 14th ECC byte as 0x0 for ROM compatibility */
+		ecc_code[chip->ecc.bytes - 1] = 0x0;
 		break;
 	case OMAP_ECC_BCH16_CODE_HW:
 		break;
@@ -350,6 +431,22 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 	return 0;
 }
 
+/**
+ * omap_calculate_ecc_bch - ECC generator for 1 sector
+ * @mtd:        MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
+ * when SW based correction is required as ECC is required for one sector
+ * at a time.
+ */
+static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
+				  const u_char *dat, u_char *ecc_calc)
+{
+	return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0);
+}
+
 static inline void omap_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
@@ -474,6 +571,35 @@ static void omap_nand_read_prefetch(struct mtd_info *mtd, uint8_t *buf, int len)
 #endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */
 
 #ifdef CONFIG_NAND_OMAP_ELM
+
+/**
+ * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
+ */
+static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_calc)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	int eccbytes = chip->ecc.bytes;
+	unsigned long nsectors;
+	int i, ret;
+
+	nsectors = ((readl(&gpmc_cfg->ecc_config) >> 4) & 0x7) + 1;
+	for (i = 0; i < nsectors; i++) {
+		ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i);
+		if (ret)
+			return ret;
+
+		ecc_calc += eccbytes;
+	}
+
+	return 0;
+}
+
 /*
  * omap_reverse_list - re-orders list elements in reverse order [internal]
  * @list:	pointer to start of list
@@ -626,52 +752,49 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
+	int ecctotal = chip->ecc.total;
 	int eccsteps = chip->ecc.steps;
 	uint8_t *p = buf;
 	uint8_t *ecc_calc = chip->buffers->ecccalc;
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *oob = chip->oob_poi;
-	uint32_t data_pos;
 	uint32_t oob_pos;
 
-	data_pos = 0;
 	/* oob area start */
 	oob_pos = (eccsize * eccsteps) + chip->ecc.layout->eccpos[0];
 	oob += chip->ecc.layout->eccpos[0];
 
-	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize,
+	/* Enable ECC engine */
-				oob += eccbytes) {
+	chip->ecc.hwctl(mtd, NAND_ECC_READ);
-		chip->ecc.hwctl(mtd, NAND_ECC_READ);
-		/* read data */
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1);
-		chip->read_buf(mtd, p, eccsize);
 
-		/* read respective ecc from oob area */
+	/* read entire page */
-		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
-		chip->read_buf(mtd, oob, eccbytes);
+	chip->read_buf(mtd, buf, mtd->writesize);
-		/* read syndrome */
-		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
 
-		data_pos += eccsize;
+	/* read all ecc bytes from oob area */
-		oob_pos += eccbytes;
+	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
-	}
+	chip->read_buf(mtd, oob, ecctotal);
+
+	/* Calculate ecc bytes */
+	omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc);
 
 	for (i = 0; i < chip->ecc.total; i++)
 		ecc_code[i] = chip->oob_poi[eccpos[i]];
 
+	/* error detect & correct */
 	eccsteps = chip->ecc.steps;
 	p = buf;
 
 	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		int stat;
-
 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
 		if (stat < 0)
 			mtd->ecc_stats.failed++;
 		else
 			mtd->ecc_stats.corrected += stat;
 	}
+
 	return 0;
 }
 #endif /* CONFIG_NAND_OMAP_ELM */
@@ -819,9 +942,9 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
 		nand->ecc.strength	= 8;
 		nand->ecc.size		= SECTOR_BYTES;
 		nand->ecc.bytes		= 13;
-		nand->ecc.hwctl		= omap_enable_hwecc;
+		nand->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand->ecc.correct	= omap_correct_data_bch_sw;
-		nand->ecc.calculate	= omap_calculate_ecc;
+		nand->ecc.calculate	= omap_calculate_ecc_bch;
 		/* define ecc-layout */
 		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
 		ecclayout->eccpos[0]	= BADBLOCK_MARKER_LENGTH;
@@ -860,9 +983,9 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
 		nand->ecc.strength	= 8;
 		nand->ecc.size		= SECTOR_BYTES;
 		nand->ecc.bytes		= 14;
-		nand->ecc.hwctl		= omap_enable_hwecc;
+		nand->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand->ecc.correct	= omap_correct_data_bch;
-		nand->ecc.calculate	= omap_calculate_ecc;
+		nand->ecc.calculate	= omap_calculate_ecc_bch;
 		nand->ecc.read_page	= omap_read_page_bch;
 		/* define ecc-layout */
 		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
@@ -893,9 +1016,9 @@ static int omap_select_ecc_scheme(struct nand_chip *nand,
 		nand->ecc.size		= SECTOR_BYTES;
 		nand->ecc.bytes		= 26;
 		nand->ecc.strength	= 16;
-		nand->ecc.hwctl		= omap_enable_hwecc;
+		nand->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand->ecc.correct	= omap_correct_data_bch;
-		nand->ecc.calculate	= omap_calculate_ecc;
+		nand->ecc.calculate	= omap_calculate_ecc_bch;
 		nand->ecc.read_page	= omap_read_page_bch;
 		/* define ecc-layout */
 		ecclayout->eccbytes	= nand->ecc.bytes * eccsteps;
@@ -1000,7 +1123,7 @@ int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength)
  *   nand_scan about special functionality. See the defines for further
  *   explanation
  */
-int board_nand_init(struct nand_chip *nand)
+int gpmc_nand_init(struct nand_chip *nand)
 {
 	int32_t gpmc_config = 0;
 	int cs = cs_next++;
@@ -1080,3 +1203,113 @@ int board_nand_init(struct nand_chip *nand)
 
 	return 0;
 }
+
+/* First NAND chip for SPL use only */
+static __maybe_unused struct nand_chip *nand_chip;
+
+#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT)
+
+static int gpmc_nand_probe(struct udevice *dev)
+{
+	struct nand_chip *nand = dev_get_priv(dev);
+	struct mtd_info *mtd = nand_to_mtd(nand);
+	int ret;
+
+	gpmc_nand_init(nand);
+
+	ret = nand_scan(mtd, CONFIG_SYS_NAND_MAX_CHIPS);
+	if (ret)
+		return ret;
+
+	ret = nand_register(0, mtd);
+	if (ret)
+		return ret;
+
+	if (!nand_chip)
+		nand_chip = nand;
+
+	return 0;
+}
+
+static const struct udevice_id gpmc_nand_ids[] = {
+	{ .compatible = "ti,am64-nand" },
+	{ .compatible = "ti,omap2-nand" },
+	{ }
+};
+
+U_BOOT_DRIVER(gpmc_nand) = {
+	.name           = "gpmc-nand",
+	.id             = UCLASS_MTD,
+	.of_match       = gpmc_nand_ids,
+	.probe          = gpmc_nand_probe,
+	.priv_auto	= sizeof(struct nand_chip),
+};
+
+void board_nand_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+#ifdef CONFIG_NAND_OMAP_ELM
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+					  DM_DRIVER_GET(gpmc_elm), &dev);
+	if (ret && ret != -ENODEV) {
+		pr_err("%s: Failed to get ELM device: %d\n", __func__, ret);
+		return;
+	}
+#endif
+
+	ret = uclass_get_device_by_driver(UCLASS_MTD,
+					  DM_DRIVER_GET(gpmc_nand), &dev);
+	if (ret && ret != -ENODEV)
+		pr_err("%s: Failed to get GPMC device: %d\n", __func__, ret);
+}
+
+#else
+
+int board_nand_init(struct nand_chip *nand)
+{
+	return gpmc_nand_init(nand);
+}
+
+#endif /* CONFIG_SYS_NAND_SELF_INIT */
+
+#if defined(CONFIG_SPL_NAND_INIT)
+
+/* nand_init() is provided by nand.c */
+
+/* Unselect after operation */
+void nand_deselect(void)
+{
+	struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+	if (nand_chip->select_chip)
+		nand_chip->select_chip(mtd, -1);
+}
+
+static int nand_is_bad_block(int block)
+{
+	struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+	loff_t ofs = block * CONFIG_SYS_NAND_BLOCK_SIZE;
+
+	return nand_chip->block_bad(mtd, ofs);
+}
+
+static int nand_read_page(int block, int page, uchar *dst)
+{
+	int page_addr = block * CONFIG_SYS_NAND_PAGE_COUNT + page;
+	loff_t ofs = page_addr * CONFIG_SYS_NAND_PAGE_SIZE;
+	int ret;
+	size_t len = CONFIG_SYS_NAND_PAGE_SIZE;
+	struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+	ret = nand_read(mtd, ofs, &len, dst);
+	if (ret)
+		printf("nand_read failed %d\n", ret);
+
+	return ret;
+}
+
+#include "nand_spl_loaders.c"
+#endif /* CONFIG_SPL_NAND_INIT */