Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch '2022-08-20-enforce-DM_ETH-migration'

Browse source 
Enforce requiring DM_ETH to be enabled for ethernet drivers, as the
migration deadline has well passed. To facilitate this, we remove some
non-migrated platforms and disable networking on a few others. Finally
we remove some of the now-useless non-DM_ETH code in some platforms as a
prerequisite for DM_ETH being set.
This commit is contained in:
Tom Rini 2022-08-20 22:39:42 -04:00
commit f5abb5b110
117 changed files with 50 additions and 7546 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
.azure-pipelines.yml
View file

@ -517,9 +517,7 @@ stages:
non_fsl_ppc:
BUILDMAN: "powerpc -x freescale"
mpc85xx_freescale:
BUILDMAN: "mpc85xx&freescale -x t208xrdb -x t102* -x p1_p2_rdb_pc -x p1010rdb -x corenet_ds -x bsc91*"
t208xrdb_corenet_ds:
BUILDMAN: "t208xrdb corenet_ds"
BUILDMAN: "mpc85xx&freescale -x t102* -x p1_p2_rdb_pc -x p1010rdb -x bsc91*"
fsl_ppc:
BUILDMAN: "mpc83xx&freescale"
t102x:

1
Makefile
View file

@ -1151,7 +1151,6 @@ ifneq ($(CONFIG_DM),y)
endif
$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
$(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
$(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
$(call deprecated,CONFIG_DM_KEYBOARD,Keyboard drivers,v2022.10,$(CONFIG_KEYBOARD))
@# CONFIG_SYS_TIMER_RATE has brackets in it for some boards which

2
arch/arm/cpu/armv8/fsl-layerscape/fdt.c
View file

@ -671,7 +671,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
"clock-frequency", get_qman_freq(), 1);
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_FMAN_ENET
fdt_fixup_fman_firmware(blob);
#endif
#ifdef CONFIG_FSL_PFE

3
arch/arm/include/asm/arch-lpc32xx/config.h
View file

@ -26,9 +26,6 @@
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
/* Ethernet */
#define LPC32XX_ETH_BASE ETHERNET_BASE
/* NAND */
#if defined(CONFIG_NAND_LPC32XX_SLC)
#define NAND_LARGE_BLOCK_PAGE_SIZE 0x800

8
arch/arm/mach-lpc32xx/cpu.c
View file

@ -59,11 +59,3 @@ int print_cpuinfo(void)
return 0;
}
#endif
#ifdef CONFIG_LPC32XX_ETH
int cpu_eth_init(struct bd_info *bis)
{
lpc32xx_eth_initialize(bis);
return 0;
}
#endif

1
arch/arm/mach-omap2/Kconfig
View file

@ -207,7 +207,6 @@ source "board/siemens/rut/Kconfig"
source "board/ti/ti816x/Kconfig"
source "board/ti/am43xx/Kconfig"
source "board/ti/am335x/Kconfig"
source "board/compulab/cm_t335/Kconfig"
source "board/compulab/cm_t43/Kconfig"
source "board/phytec/phycore_am335x_r2/Kconfig"

7
arch/arm/mach-omap2/am33xx/Kconfig
View file

@ -125,13 +125,6 @@ config TARGET_CHILIBOARD
select DM_SERIAL
imply CMD_DM
config TARGET_CM_T335
bool "Support cm_t335"
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_DRACO
bool "Support draco"
select BOARD_LATE_INIT

13
arch/arm/mach-orion5x/Kconfig
View file

@ -6,21 +6,8 @@ config 88F5182
config FEROCEON
bool
choice
prompt "Marvell Orion board select"
optional
config TARGET_EDMINIV2
bool "LaCie Ethernet Disk mini V2"
select 88F5182
select FEROCEON
select SUPPORT_SPL
endchoice
config SYS_SOC
default "orion5x"
source "board/LaCie/edminiv2/Kconfig"
endif

8
arch/arm/mach-rmobile/Kconfig.32
View file

@ -50,9 +50,6 @@ choice
prompt "Renesas ARM SoCs board select"
optional
config TARGET_ARMADILLO_800EVA
bool "armadillo 800 eva board"
config TARGET_BLANCHE
bool "Blanche board"
select DM
@ -86,9 +83,6 @@ config TARGET_LAGER
select SPL_USE_TINY_PRINTF
imply CMD_DM
config TARGET_KZM9G
bool "KZM9D board"
config TARGET_ALT
bool "Alt board"
select DM
@ -156,12 +150,10 @@ config QOS_PRI_GFX
endchoice
source "board/atmark-techno/armadillo-800eva/Kconfig"
source "board/renesas/blanche/Kconfig"
source "board/renesas/gose/Kconfig"
source "board/renesas/koelsch/Kconfig"
source "board/renesas/lager/Kconfig"
source "board/kmc/kzm9g/Kconfig"
source "board/renesas/alt/Kconfig"
source "board/renesas/silk/Kconfig"
source "board/renesas/porter/Kconfig"

1
arch/powerpc/cpu/mpc85xx/Kconfig
View file

@ -1444,7 +1444,6 @@ config FSL_VIA
bool
source "board/emulation/qemu-ppce500/Kconfig"
source "board/freescale/corenet_ds/Kconfig"
source "board/freescale/mpc8548cds/Kconfig"
source "board/freescale/p1010rdb/Kconfig"
source "board/freescale/p1_p2_rdb_pc/Kconfig"

12
board/LaCie/edminiv2/Kconfig
View file

@ -1,12 +0,0 @@
if TARGET_EDMINIV2
config SYS_BOARD
default "edminiv2"
config SYS_VENDOR
default "LaCie"
config SYS_CONFIG_NAME
default "edminiv2"
endif

6
board/LaCie/edminiv2/MAINTAINERS
View file

@ -1,6 +0,0 @@
EDMINIV2 BOARD
M: Simon Guinot <simon.guinot@sequanux.org>
S: Maintained
F: board/LaCie/edminiv2/
F: include/configs/edminiv2.h
F: configs/edminiv2_defconfig

10
board/LaCie/edminiv2/Makefile
View file

@ -1,10 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
#
# Based on original Kirkwood support which is
# (C) Copyright 2009
# Marvell Semiconductor <www.marvell.com>
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
obj-y := edminiv2.o ../common/common.o

57
board/LaCie/edminiv2/edminiv2.c
View file

@ -1,57 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#include <common.h>
#include <miiphy.h>
#include <net.h>
#include <asm/arch/orion5x.h>
#include <asm/global_data.h>
#include "../common/common.h"
#include <spl.h>
#include <ns16550.h>
#include <asm/mach-types.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
/* arch number of board */
gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2;
/* boot parameter start at 256th byte of RAM base */
gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
return 0;
}
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and enable MV88E1116 PHY */
void reset_phy(void)
{
mv_phy_88e1116_init("egiga0", 8);
}
#endif /* CONFIG_RESET_PHY_R */
/*
* SPL serial setup and NOR boot device selection
*/
#ifdef CONFIG_SPL_BUILD
void spl_board_init(void)
{
preloader_console_init();
}
u32 spl_boot_device(void)
{
return BOOT_DEVICE_NOR;
}
#endif /* CONFIG_SPL_BUILD */

12
board/atmark-techno/armadillo-800eva/Kconfig
View file

@ -1,12 +0,0 @@
if TARGET_ARMADILLO_800EVA
config SYS_BOARD
default "armadillo-800eva"
config SYS_VENDOR
default "atmark-techno"
config SYS_CONFIG_NAME
default "armadillo-800eva"
endif

6
board/atmark-techno/armadillo-800eva/MAINTAINERS
View file

@ -1,6 +0,0 @@
ARMADILLO-800EVA BOARD
M: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
S: Maintained
F: board/atmark-techno/armadillo-800eva/
F: include/configs/armadillo-800eva.h
F: configs/armadillo-800eva_defconfig

5
board/atmark-techno/armadillo-800eva/Makefile
View file

@ -1,5 +0,0 @@
# SPDX-License-Identifier: GPL-2.0
#
# Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
obj-y += armadillo-800eva.o

327
board/atmark-techno/armadillo-800eva/armadillo-800eva.c
View file

@ -1,327 +0,0 @@
/*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <malloc.h>
#include <asm/global_data.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
#define s_init_wait(cnt) \
({ \
volatile u32 i = 0x10000 * cnt; \
while (i > 0) \
i--; \
})
#define USBCR1 0xE605810A
void s_init(void)
{
struct r8a7740_rwdt *rwdt0 = (struct r8a7740_rwdt *)RWDT0_BASE;
struct r8a7740_rwdt *rwdt1 = (struct r8a7740_rwdt *)RWDT1_BASE;
struct r8a7740_cpg *cpg = (struct r8a7740_cpg *)CPG_BASE;
struct r8a7740_bsc *bsc = (struct r8a7740_bsc *)BSC_BASE;
struct r8a7740_ddrp *ddrp = (struct r8a7740_ddrp *)DDRP_BASE;
struct r8a7740_dbsc *dbsc = (struct r8a7740_dbsc *)DBSC_BASE;
/* Watchdog init */
writew(0xA500, &rwdt0->rwtcsra0);
writew(0xA500, &rwdt1->rwtcsra0);
/* CPG */
writel(0xFF800080, &cpg->rmstpcr4);
writel(0xFF800080, &cpg->smstpcr4);
/* USB clock */
writel(0x00000080, &cpg->usbckcr);
s_init_wait(1);
/* USBCR1 */
writew(0x0710, USBCR1);
/* FRQCR */
writel(0x00000000, &cpg->frqcrb);
writel(0x62030533, &cpg->frqcra);
writel(0x208A354E, &cpg->frqcrc);
writel(0x80331050, &cpg->frqcrb);
s_init_wait(1);
writel(0x00000000, &cpg->frqcrd);
s_init_wait(1);
/* SUBClk */
writel(0x0000010B, &cpg->subckcr);
/* PLL */
writel(0x00004004, &cpg->pllc01cr);
s_init_wait(1);
writel(0xa0000000, &cpg->pllc2cr);
s_init_wait(2);
/* BSC */
writel(0x0000001B, &bsc->cmncr);
writel(0x20000000, &dbsc->dbcmd);
writel(0x10009C40, &dbsc->dbcmd);
s_init_wait(1);
writel(0x00000007, &dbsc->dbkind);
writel(0x0E030A02, &dbsc->dbconf0);
writel(0x00000001, &dbsc->dbphytype);
writel(0x00000000, &dbsc->dbbl);
writel(0x00000006, &dbsc->dbtr0);
writel(0x00000005, &dbsc->dbtr1);
writel(0x00000000, &dbsc->dbtr2);
writel(0x00000006, &dbsc->dbtr3);
writel(0x00080006, &dbsc->dbtr4);
writel(0x00000015, &dbsc->dbtr5);
writel(0x0000000f, &dbsc->dbtr6);
writel(0x00000004, &dbsc->dbtr7);
writel(0x00000018, &dbsc->dbtr8);
writel(0x00000006, &dbsc->dbtr9);
writel(0x00000006, &dbsc->dbtr10);
writel(0x0000000F, &dbsc->dbtr11);
writel(0x0000000D, &dbsc->dbtr12);
writel(0x000000A0, &dbsc->dbtr13);
writel(0x000A0003, &dbsc->dbtr14);
writel(0x00000003, &dbsc->dbtr15);
writel(0x40005005, &dbsc->dbtr16);
writel(0x0C0C0000, &dbsc->dbtr17);
writel(0x00000200, &dbsc->dbtr18);
writel(0x00000040, &dbsc->dbtr19);
writel(0x00000001, &dbsc->dbrnk0);
writel(0x00000110, &dbsc->dbdficnt);
writel(0x00000101, &ddrp->funcctrl);
writel(0x00000001, &ddrp->dllctrl);
writel(0x00000186, &ddrp->zqcalctrl);
writel(0xB3440051, &ddrp->zqodtctrl);
writel(0x94449443, &ddrp->rdctrl);
writel(0x000000C0, &ddrp->rdtmg);
writel(0x00000101, &ddrp->fifoinit);
writel(0x02060506, &ddrp->outctrl);
writel(0x00004646, &ddrp->dqcalofs1);
writel(0x00004646, &ddrp->dqcalofs2);
writel(0x800000aa, &ddrp->dqcalexp);
writel(0x00000000, &ddrp->dllctrl);
writel(0x00000000, DDRPNCNT);
writel(0x0000000C, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00000002, DDRPNCNT);
writel(0x0000000C, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00000187, &ddrp->zqcalctrl);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00000010, &dbsc->dbdficnt);
writel(0x02060507, &ddrp->outctrl);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x21009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x00009C40, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x11000044, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x2A000000, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x2B000000, &dbsc->dbcmd);
readl(&dbsc->dbwait);
writel(0x29000004, &dbsc->dbcmd);
readl(&dbsc->dbwait);
writel(0x28001520, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x03000200, &dbsc->dbcmd);
readl(&dbsc->dbwait);
s_init_wait(1);
writel(0x000001FF, &dbsc->dbrfcnf0);
writel(0x00010C30, &dbsc->dbrfcnf1);
writel(0x00000000, &dbsc->dbrfcnf2);
writel(0x00000001, &dbsc->dbrfen);
writel(0x00000001, &dbsc->dbacen);
/* BSC */
writel(0x00410400, &bsc->cs0bcr);
writel(0x00410400, &bsc->cs2bcr);
writel(0x00410400, &bsc->cs5bbcr);
writel(0x02CB0400, &bsc->cs6abcr);
writel(0x00000440, &bsc->cs0wcr);
writel(0x00000440, &bsc->cs2wcr);
writel(0x00000240, &bsc->cs5bwcr);
writel(0x00000240, &bsc->cs6awcr);
writel(0x00000005, &bsc->rbwtcnt);
writel(0x00000002, &bsc->cs0wcr2);
writel(0x00000002, &bsc->cs2wcr2);
writel(0x00000002, &bsc->cs4wcr2);
}
#define GPIO_ICCR (0xE60581A0)
#define ICCR_15BIT (1 << 15) /* any time 1 */
#define IIC0_CONTA (1 << 7)
#define IIC0_CONTB (1 << 6)
#define IIC1_CONTA (1 << 5)
#define IIC1_CONTB (1 << 4)
#define IIC0_PS33E (1 << 1)
#define IIC1_PS33E (1 << 0)
#define GPIO_ICCR_DATA \
(ICCR_15BIT | \
IIC0_CONTA | IIC0_CONTB | IIC1_CONTA | \
IIC1_CONTB | IIC0_PS33E | IIC1_PS33E)
#define MSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
#define I2C0_MSTP116 (1 << 16)
#define MSTPCR3 0xE615013C
#define I2C1_MSTP323 (1 << 23)
#define GETHER_MSTP309 (1 << 9)
#define GPIO_SCIFA1_TXD (0xE60520C4)
#define GPIO_SCIFA1_RXD (0xE60520C3)
int board_early_init_f(void)
{
/* TMU */
clrbits_le32(MSTPCR1, TMU0_MSTP125);
/* GETHER */
clrbits_le32(MSTPCR3, GETHER_MSTP309);
/* I2C 0/1 */
clrbits_le32(MSTPCR1, I2C0_MSTP116);
clrbits_le32(MSTPCR3, I2C1_MSTP323);
/* SCIFA1 */
writeb(1, GPIO_SCIFA1_TXD); /* SCIFA1_TXD */
writeb(1, GPIO_SCIFA1_RXD); /* SCIFA1_RXD */
/* IICCR */
writew(GPIO_ICCR_DATA, GPIO_ICCR);
return 0;
}
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_ARMADILLO800EVA;
/* adress of boot parameters */
gd->bd->bi_boot_params = ARMADILLO_800EVA_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7740_pinmux_init();
/* GETHER Enable */
gpio_request(GPIO_FN_ET_CRS, NULL);
gpio_request(GPIO_FN_ET_MDC, NULL);
gpio_request(GPIO_FN_ET_MDIO, NULL);
gpio_request(GPIO_FN_ET_TX_ER, NULL);
gpio_request(GPIO_FN_ET_RX_ER, NULL);
gpio_request(GPIO_FN_ET_ERXD0, NULL);
gpio_request(GPIO_FN_ET_ERXD1, NULL);
gpio_request(GPIO_FN_ET_ERXD2, NULL);
gpio_request(GPIO_FN_ET_ERXD3, NULL);
gpio_request(GPIO_FN_ET_TX_CLK, NULL);
gpio_request(GPIO_FN_ET_TX_EN, NULL);
gpio_request(GPIO_FN_ET_ETXD0, NULL);
gpio_request(GPIO_FN_ET_ETXD1, NULL);
gpio_request(GPIO_FN_ET_ETXD2, NULL);
gpio_request(GPIO_FN_ET_ETXD3, NULL);
gpio_request(GPIO_FN_ET_PHY_INT, NULL);
gpio_request(GPIO_FN_ET_COL, NULL);
gpio_request(GPIO_FN_ET_RX_DV, NULL);
gpio_request(GPIO_FN_ET_RX_CLK, NULL);
gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
gpio_direction_output(GPIO_PORT18, 1);
return 0;
}
int dram_init(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
int board_late_init(void)
{
return 0;
}
void reset_cpu(void)
{
}

35
board/atmel/at91sam9n12ek/at91sam9n12ek.c
View file

@ -135,30 +135,6 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_LCD */
#ifdef CONFIG_KS8851_MLL
void at91sam9n12ek_ks8851_hw_init(void)
{
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
&smc->cs[2].setup);
writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) |
AT91_SMC_PULSE_NRD(7) | AT91_SMC_PULSE_NCS_RD(7),
&smc->cs[2].pulse);
writel(AT91_SMC_CYCLE_NWE(9) | AT91_SMC_CYCLE_NRD(9),
&smc->cs[2].cycle);
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
AT91_SMC_MODE_EXNW_DISABLE |
AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
AT91_SMC_MODE_TDF_CYCLE(1),
&smc->cs[2].mode);
/* Configure NCS2 PIN */
at91_pio3_set_b_periph(AT91_PIO_PORTD, 19, 0);
}
#endif
#ifdef CONFIG_USB_ATMEL
void at91sam9n12ek_usb_hw_init(void)
{
@ -193,10 +169,6 @@ int board_init(void)
at91_lcd_hw_init();
#endif
#ifdef CONFIG_KS8851_MLL
at91sam9n12ek_ks8851_hw_init();
#endif
#ifdef CONFIG_USB_ATMEL
at91sam9n12ek_usb_hw_init();
#endif
@ -204,13 +176,6 @@ int board_init(void)
return 0;
}
#ifdef CONFIG_KS8851_MLL
int board_eth_init(struct bd_info *bis)
{
return ks8851_mll_initialize(0, CONFIG_KS8851_MLL_BASEADDR);
}
#endif
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,

15
board/compulab/cm_t335/Kconfig
View file

@ -1,15 +0,0 @@
if TARGET_CM_T335
config SYS_BOARD
default "cm_t335"
config SYS_VENDOR
default "compulab"
config SYS_SOC
default "am33xx"
config SYS_CONFIG_NAME
default "cm_t335"
endif

6
board/compulab/cm_t335/MAINTAINERS
View file

@ -1,6 +0,0 @@
CM_T335 BOARD
M: Igor Grinberg <grinberg@compulab.co.il>
S: Maintained
F: board/compulab/cm_t335/
F: include/configs/cm_t335.h
F: configs/cm_t335_defconfig

8
board/compulab/cm_t335/Makefile
View file

@ -1,8 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/
#
# Author: Ilya Ledvich <ilya@compulab.co.il>
obj-y += cm_t335.o
obj-$(CONFIG_SPL_BUILD) += mux.o spl.o

166
board/compulab/cm_t335/cm_t335.c
View file

@ -1,166 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Board functions for Compulab CM-T335 board
*
* Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
*
* Author: Ilya Ledvich <ilya@compulab.co.il>
*/
#include <common.h>
#include <env.h>
#include <errno.h>
#include <miiphy.h>
#include <net.h>
#include <status_led.h>
#include <cpsw.h>
#include <asm/global_data.h>
#include <linux/delay.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware_am33xx.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include "../common/eeprom.h"
DECLARE_GLOBAL_DATA_PTR;
/*
* Basic board specific setup. Pinmux has been handled already.
*/
int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_OFF);
#endif
return 0;
}
#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
static void cpsw_control(int enabled)
{
/* VTP can be added here */
return;
}
static struct cpsw_slave_data cpsw_slave = {
.slave_reg_ofs = 0x208,
.sliver_reg_ofs = 0xd80,
.phy_addr = 0,
.phy_if = PHY_INTERFACE_MODE_RGMII,
};
static struct cpsw_platform_data cpsw_data = {
.mdio_base = CPSW_MDIO_BASE,
.cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
.slaves = 1,
.slave_data = &cpsw_slave,
.ale_reg_ofs = 0xd00,
.ale_entries = 1024,
.host_port_reg_ofs = 0x108,
.hw_stats_reg_ofs = 0x900,
.bd_ram_ofs = 0x2000,
.mac_control = (1 << 5),
.control = cpsw_control,
.host_port_num = 0,
.version = CPSW_CTRL_VERSION_2,
};
/* PHY reset GPIO */
#define GPIO_PHY_RST GPIO_PIN(3, 7)
static void board_phy_init(void)
{
gpio_request(GPIO_PHY_RST, "phy_rst");
gpio_direction_output(GPIO_PHY_RST, 0);
mdelay(2);
gpio_set_value(GPIO_PHY_RST, 1);
mdelay(2);
}
static void get_efuse_mac_addr(uchar *enetaddr)
{
uint32_t mac_hi, mac_lo;
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
mac_lo = readl(&cdev->macid0l);
mac_hi = readl(&cdev->macid0h);
enetaddr[0] = mac_hi & 0xFF;
enetaddr[1] = (mac_hi & 0xFF00) >> 8;
enetaddr[2] = (mac_hi & 0xFF0000) >> 16;
enetaddr[3] = (mac_hi & 0xFF000000) >> 24;
enetaddr[4] = mac_lo & 0xFF;
enetaddr[5] = (mac_lo & 0xFF00) >> 8;
}
/*
* Routine: handle_mac_address
* Description: prepare MAC address for on-board Ethernet.
*/
static int handle_mac_address(void)
{
uchar enetaddr[6];
int rv;
rv = eth_env_get_enetaddr("ethaddr", enetaddr);
if (rv)
return 0;
rv = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (rv)
get_efuse_mac_addr(enetaddr);
if (!is_valid_ethaddr(enetaddr))
return -1;
return eth_env_set_enetaddr("ethaddr", enetaddr);
}
#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
#define AR8051_PHY_DEBUG_DATA_REG 0x1e
#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
#define AR8051_RGMII_TX_CLK_DLY 0x100
int board_eth_init(struct bd_info *bis)
{
int rv, n = 0;
const char *devname;
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
rv = handle_mac_address();
if (rv)
printf("No MAC address found!\n");
writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
board_phy_init();
rv = cpsw_register(&cpsw_data);
if (rv < 0)
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
/*
* CPSW RGMII Internal Delay Mode is not supported in all PVT
* operating points. So we must set the TX clock delay feature
* in the AR8051 PHY. Since we only support a single ethernet
* device, we only do this for the first instance.
*/
devname = miiphy_get_current_dev();
miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG,
AR8051_DEBUG_RGMII_CLK_DLY_REG);
miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG,
AR8051_RGMII_TX_CLK_DLY);
return n;
}
#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */

116
board/compulab/cm_t335/mux.c
View file

@ -1,116 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Pinmux configuration for Compulab CM-T335 board
*
* Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
*
* Author: Ilya Ledvich <ilya@compulab.co.il>
*/
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mux.h>
#include <asm/io.h>
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
{-1},
};
static struct module_pin_mux uart1_pin_mux[] = {
{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
{OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},
{OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)},
{-1},
};
static struct module_pin_mux mmc0_pin_mux[] = {
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},
{-1},
};
static struct module_pin_mux i2c0_pin_mux[] = {
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
{-1},
};
static struct module_pin_mux i2c1_pin_mux[] = {
/* I2C_DATA */
{OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
/* I2C_SCLK */
{OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
{-1},
};
static struct module_pin_mux rgmii1_pin_mux[] = {
{OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
{OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
{OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
{OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
{OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
{OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
{OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
{OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
{OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
{OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
{OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
{OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
{-1},
};
static struct module_pin_mux nand_pin_mux[] = {
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
{-1},
};
static struct module_pin_mux eth_phy_rst_pin_mux[] = {
{OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */
{-1},
};
static struct module_pin_mux status_led_pin_mux[] = {
{OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */
{-1},
};
void set_uart_mux_conf(void)
{
configure_module_pin_mux(uart0_pin_mux);
configure_module_pin_mux(uart1_pin_mux);
}
void set_mux_conf_regs(void)
{
configure_module_pin_mux(i2c0_pin_mux);
configure_module_pin_mux(i2c1_pin_mux);
configure_module_pin_mux(rgmii1_pin_mux);
configure_module_pin_mux(eth_phy_rst_pin_mux);
configure_module_pin_mux(mmc0_pin_mux);
configure_module_pin_mux(nand_pin_mux);
configure_module_pin_mux(status_led_pin_mux);
}

116
board/compulab/cm_t335/spl.c
View file

@ -1,116 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* SPL specific code for Compulab CM-T335 board
*
* Board functions for Compulab CM-T335 board
*
* Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
*
* Author: Ilya Ledvich <ilya@compulab.co.il>
*/
#include <common.h>
#include <cpu_func.h>
#include <errno.h>
#include <init.h>
#include <log.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/clocks_am33xx.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware_am33xx.h>
#include <linux/sizes.h>
const struct ctrl_ioregs ioregs = {
.cm0ioctl = MT41J128MJT125_IOCTRL_VALUE,
.cm1ioctl = MT41J128MJT125_IOCTRL_VALUE,
.cm2ioctl = MT41J128MJT125_IOCTRL_VALUE,
.dt0ioctl = MT41J128MJT125_IOCTRL_VALUE,
.dt1ioctl = MT41J128MJT125_IOCTRL_VALUE,
};
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J128MJT125_RD_DQS,
.datawdsratio0 = MT41J128MJT125_WR_DQS,
.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41J128MJT125_RATIO,
.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd1csratio = MT41J128MJT125_RATIO,
.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd2csratio = MT41J128MJT125_RATIO,
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
};
static struct emif_regs ddr3_emif_reg_data = {
.sdram_config = MT41J128MJT125_EMIF_SDCFG,
.ref_ctrl = MT41J128MJT125_EMIF_SDREF,
.sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
.zq_config = MT41J128MJT125_ZQ_CFG,
.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
PHY_EN_DYN_PWRDN,
};
const struct dpll_params dpll_ddr = {
/* M N M2 M3 M4 M5 M6 */
303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
void am33xx_spl_board_init(void)
{
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* Get the frequency */
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
/* Set CORE Frequencies to OPP100 */
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
/* Set MPU Frequency to what we detected now that voltages are set */
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
}
const struct dpll_params *get_dpll_ddr_params(void)
{
return &dpll_ddr;
}
static void probe_sdram_size(long size)
{
switch (size) {
case SZ_512M:
ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
break;
case SZ_256M:
ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
break;
case SZ_128M:
ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
break;
default:
puts("Failed configuring DRAM, resetting...\n\n");
reset_cpu();
}
debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
config_ddr(303, &ioregs, &ddr3_data,
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
}
void sdram_init(void)
{
long size = SZ_1G;
do {
size = size / 2;
probe_sdram_size(size);
} while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
return;
}

110
board/compulab/cm_t335/u-boot.lds
View file

@ -1,110 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2004-2008 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
*(.__image_copy_start)
*(.vectors)
CPUDIR/start.o (.text*)
board/compulab/cm_t335/built-in.o (.text*)
*(.text*)
}
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
. = ALIGN(4);
.data : {
*(.data*)
}
. = ALIGN(4);
. = .;
. = ALIGN(4);
__u_boot_list : {
KEEP(*(SORT(__u_boot_list*)));
}
. = ALIGN(4);
.image_copy_end :
{
*(.__image_copy_end)
}
.rel_dyn_start :
{
*(.__rel_dyn_start)
}
.rel.dyn : {
*(.rel*)
}
.rel_dyn_end :
{
*(.__rel_dyn_end)
}
.hash : { *(.hash*) }
.end :
{
*(.__end)
}
_image_binary_end = .;
/*
* Deprecated: this MMU section is used by pxa at present but
* should not be used by new boards/CPUs.
*/
. = ALIGN(4096);
.mmutable : {
*(.mmutable)
}
/*
* Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
* __bss_base and __bss_limit are for linker only (overlay ordering)
*/
.bss_start __rel_dyn_start (OVERLAY) : {
KEEP(*(.__bss_start));
__bss_base = .;
}
.bss __bss_base (OVERLAY) : {
*(.bss*)
. = ALIGN(4);
__bss_limit = .;
}
.bss_end __bss_limit (OVERLAY) : {
KEEP(*(.__bss_end));
}
.dynsym _image_binary_end : { *(.dynsym) }
.dynbss : { *(.dynbss) }
.dynstr : { *(.dynstr*) }
.dynamic : { *(.dynamic*) }
.plt : { *(.plt*) }
.interp : { *(.interp*) }
.gnu : { *(.gnu*) }
.ARM.exidx : { *(.ARM.exidx*) }
}

1
board/freescale/common/Makefile
View file

@ -41,7 +41,6 @@ obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
endif
obj-$(CONFIG_FSL_SGMII_RISER) += sgmii_riser.o
ifndef CONFIG_RAMBOOT_PBL
obj-$(CONFIG_FSL_FIXED_MMC_LOCATION) += sdhc_boot.o
endif

130
board/freescale/common/sgmii_riser.c
View file

@ -1,130 +0,0 @@
/*
* Freescale SGMII Riser Card
*
* This driver supports the SGMII Riser card found on the
* "DS" style of development board from Freescale.
*
* This software may be used and distributed according to the
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
* Copyright 2008 Freescale Semiconductor, Inc.
*
*/
#include <config.h>
#include <common.h>
#include <log.h>
#include <net.h>
#include <linux/libfdt.h>
#include <tsec.h>
#include <fdt_support.h>
void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
{
int i;
for (i = 0; i < num; i++)
if (tsec_info[i].flags & TSEC_SGMII)
tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
}
void fsl_sgmii_riser_fdt_fixup(void *fdt)
{
struct eth_device *dev;
int node;
int mdio_node;
int i = -1;
int etsec_num = 0;
node = fdt_path_offset(fdt, "/aliases");
if (node < 0)
return;
while ((dev = eth_get_dev_by_index(++i)) != NULL) {
struct tsec_private *priv;
int phy_node;
int enet_node;
uint32_t ph;
char sgmii_phy[16];
char enet[16];
const u32 *phyh;
const char *model;
const char *path;
if (!strstr(dev->name, "eTSEC"))
continue;
priv = dev->priv;
if (!(priv->flags & TSEC_SGMII)) {
etsec_num++;
continue;
}
mdio_node = fdt_node_offset_by_compatible(fdt, -1,
"fsl,gianfar-mdio");
if (mdio_node < 0)
return;
sprintf(sgmii_phy, "sgmii-phy@%d", etsec_num);
phy_node = fdt_subnode_offset(fdt, mdio_node, sgmii_phy);
if (phy_node > 0) {
fdt_increase_size(fdt, 32);
ph = fdt_create_phandle(fdt, phy_node);
if (!ph)
continue;
}
sprintf(enet, "ethernet%d", etsec_num++);
path = fdt_getprop(fdt, node, enet, NULL);
if (!path) {
debug("No alias for %s\n", enet);
continue;
}
enet_node = fdt_path_offset(fdt, path);
if (enet_node < 0)
continue;
model = fdt_getprop(fdt, enet_node, "model", NULL);
/*
* We only want to do this to eTSECs. On some platforms
* there are more than one type of gianfar-style ethernet
* controller, and as we are creating an implicit connection
* between ethernet nodes and eTSEC devices, it is best to
* make the connection use as much explicit information
* as exists.
*/
if (!strstr(model, "TSEC"))
continue;
if (phy_node < 0) {
/*
* This part is only for old device tree without
* sgmii_phy nodes. It's kept just for compatible
* reason. Soon to be deprecated if all device tree
* get updated.
*/
phyh = fdt_getprop(fdt, enet_node, "phy-handle", NULL);
if (!phyh)
continue;
phy_node = fdt_node_offset_by_phandle(fdt,
fdt32_to_cpu(*phyh));
priv = dev->priv;
if (priv->flags & TSEC_SGMII)
fdt_setprop_cell(fdt, phy_node, "reg",
priv->phyaddr);
} else {
fdt_setprop(fdt, enet_node, "phy-handle", &ph,
sizeof(ph));
fdt_setprop_string(fdt, enet_node,
"phy-connection-type",
phy_string_for_interface(
PHY_INTERFACE_MODE_SGMII));
}
}
}

38
board/freescale/corenet_ds/Kconfig
View file

@ -1,38 +0,0 @@
if TARGET_P3041DS
config SYS_BOARD
default "corenet_ds"
config SYS_VENDOR
default "freescale"
config SYS_CONFIG_NAME
default "P3041DS"
endif
if TARGET_P4080DS
config SYS_BOARD
default "corenet_ds"
config SYS_VENDOR
default "freescale"
config SYS_CONFIG_NAME
default "P4080DS"
endif
if TARGET_P5040DS
config SYS_BOARD
default "corenet_ds"
config SYS_VENDOR
default "freescale"
config SYS_CONFIG_NAME
default "P5040DS"
endif

21
board/freescale/corenet_ds/MAINTAINERS
View file

@ -1,21 +0,0 @@
CORENET_DS BOARD
#M: -
S: Maintained
F: board/freescale/corenet_ds/
F: include/configs/P3041DS.h
F: configs/P3041DS_defconfig
F: configs/P3041DS_NAND_defconfig
F: configs/P3041DS_SDCARD_defconfig
F: configs/P3041DS_SPIFLASH_defconfig
F: configs/P3041DS_SRIO_PCIE_BOOT_defconfig
F: include/configs/P4080DS.h
F: configs/P4080DS_defconfig
F: configs/P4080DS_SDCARD_defconfig
F: configs/P4080DS_SPIFLASH_defconfig
F: configs/P4080DS_SRIO_PCIE_BOOT_defconfig
F: include/configs/P5040DS.h
F: configs/P5040DS_defconfig
F: configs/P5040DS_NAND_defconfig
F: configs/P5040DS_SDCARD_defconfig
F: configs/P5040DS_SPIFLASH_defconfig
F: configs/P5040DS_SECURE_BOOT_defconfig

14
board/freescale/corenet_ds/Makefile
View file

@ -1,14 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright 2007-2009 Freescale Semiconductor, Inc.
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += corenet_ds.o
obj-y += ddr.o
obj-$(CONFIG_TARGET_P3041DS) += eth_hydra.o
obj-$(CONFIG_TARGET_P4080DS) += eth_p4080.o
obj-$(CONFIG_TARGET_P5040DS) += eth_superhydra.o
obj-$(CONFIG_TARGET_P3041DS) += p3041ds_ddr.o
obj-$(CONFIG_TARGET_P4080DS) += p4080ds_ddr.o
obj-$(CONFIG_TARGET_P5040DS) += p5040ds_ddr.o

218
board/freescale/corenet_ds/corenet_ds.c
View file

@ -1,218 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <command.h>
#include <env.h>
#include <fdt_support.h>
#include <image.h>
#include <init.h>
#include <netdev.h>
#include <asm/global_data.h>
#include <linux/compiler.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "../common/ngpixis.h"
#include "corenet_ds.h"
DECLARE_GLOBAL_DATA_PTR;
int checkboard (void)
{
u8 sw;
struct cpu_type *cpu = gd->arch.cpu;
#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \
defined(CONFIG_TARGET_P5040DS)
unsigned int i;
#endif
static const char * const freq[] = {"100", "125", "156.25", "212.5" };
printf("Board: %sDS, ", cpu->name);
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT;
if (sw < 0x8)
printf("vBank: %d\n", sw);
else if (sw == 0x8)
puts("Promjet\n");
else if (sw == 0x9)
puts("NAND\n");
else
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
/* Display the actual SERDES reference clocks as configured by the
* dip switches on the board. Note that the SWx registers could
* technically be set to force the reference clocks to match the
* values that the SERDES expects (or vice versa). For now, however,
* we just display both values and hope the user notices when they
* don't match.
*/
puts("SERDES Reference Clocks: ");
#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \
defined(CONFIG_TARGET_P5040DS)
sw = in_8(&PIXIS_SW(5));
for (i = 0; i < 3; i++) {
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
printf("Bank%u=%sMhz ", i+1, freq[clock]);
}
#ifdef CONFIG_TARGET_P5040DS
/* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
sw = in_8(&PIXIS_SW(9));
printf("Bank4=%sMhz ", freq[sw & 3]);
#endif
puts("\n");
#else
sw = in_8(&PIXIS_SW(3));
/* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
/* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
/* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
#endif
return 0;
}
int board_early_init_f(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/*
* P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3
* disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce
* the noise introduced by these unterminated and unused clock pairs.
*/
setbits_be32(&gur->ddrclkdr, 0x001B001B);
return 0;
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
if (flash_esel == -1) {
/* very unlikely unless something is messed up */
puts("Error: Could not find TLB for FLASH BASE\n");
flash_esel = 2; /* give our best effort to continue */
} else {
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
}
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
return 0;
}
#define NUM_SRDS_BANKS 3
int misc_init_r(void)
{
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
u8 sw;
#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \
defined(CONFIG_TARGET_P5040DS)
sw = in_8(&PIXIS_SW(5));
for (i = 0; i < 3; i++) {
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
switch (clock) {
case 0:
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
break;
case 1:
actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
break;
case 2:
actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
break;
default:
printf("Warning: SDREFCLK%u switch setting of '11' is "
"unsupported\n", i + 1);
break;
}
}
#else
/* Warn if the expected SERDES reference clocks don't match the
* actual reference clocks. This needs to be done after calling
* p4080_erratum_serdes8(), since that function may modify the clocks.
*/
sw = in_8(&PIXIS_SW(3));
actual[0] = (sw & 0x40) ?
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
actual[1] = (sw & 0x20) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
actual[2] = (sw & 0x10) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
#endif
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
if (expected != actual[i]) {
printf("Warning: SERDES bank %u expects reference clock"
" %sMHz, but actual is %sMHz\n", i + 1,
serdes_clock_to_string(expected),
serdes_clock_to_string(actual[i]));
}
}
return 0;
}
int ft_board_setup(void *blob, struct bd_info *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#ifdef CONFIG_PCI
pci_of_setup(blob, bd);
#endif
fdt_fixup_liodn(blob);
fsl_fdt_fixup_dr_usb(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
#ifndef CONFIG_DM_ETH
fdt_fixup_fman_ethernet(blob);
#endif
fdt_fixup_board_enet(blob);
#endif
return 0;
}

12
board/freescale/corenet_ds/corenet_ds.h
View file

@ -1,12 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2011 Freescale Semiconductor, Inc.
*/
#ifndef __CORENET_DS_H__
#define __CORENET_DS_H__
void fdt_fixup_board_enet(void *blob);
void pci_of_setup(void *blob, struct bd_info *bd);
#endif

287
board/freescale/corenet_ds/ddr.c
View file

@ -1,287 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <i2c.h>
#include <hwconfig.h>
#include <init.h>
#include <log.h>
#include <vsprintf.h>
#include <asm/global_data.h>
#include <asm/mmu.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <asm/fsl_law.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
extern fixed_ddr_parm_t fixed_ddr_parm_0[];
#if (CONFIG_SYS_NUM_DDR_CTLRS == 2)
extern fixed_ddr_parm_t fixed_ddr_parm_1[];
#endif
phys_size_t fixed_sdram(void)
{
int i;
char buf[32];
fsl_ddr_cfg_regs_t ddr_cfg_regs;
phys_size_t ddr_size;
unsigned int lawbar1_target_id;
ulong ddr_freq, ddr_freq_mhz;
ddr_freq = get_ddr_freq(0);
ddr_freq_mhz = ddr_freq / 1000000;
printf("Configuring DDR for %s MT/s data rate\n",
strmhz(buf, ddr_freq));
for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
(ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
memcpy(&ddr_cfg_regs,
fixed_ddr_parm_0[i].ddr_settings,
sizeof(ddr_cfg_regs));
break;
}
}
if (fixed_ddr_parm_0[i].max_freq == 0)
panic("Unsupported DDR data rate %s MT/s data rate\n",
strmhz(buf, ddr_freq));
ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
#if (CONFIG_SYS_NUM_DDR_CTLRS == 2)
memcpy(&ddr_cfg_regs,
fixed_ddr_parm_1[i].ddr_settings,
sizeof(ddr_cfg_regs));
ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1, 0);
#endif
/*
* setup laws for DDR. If not interleaving, presuming half memory on
* DDR1 and the other half on DDR2
*/
if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) {
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
ddr_size,
LAW_TRGT_IF_DDR_INTRLV) < 0) {
printf("ERROR setting Local Access Windows for DDR\n");
return 0;
}
} else {
#if (CONFIG_SYS_NUM_DDR_CTLRS == 2)
/* We require both controllers have identical DIMMs */
lawbar1_target_id = LAW_TRGT_IF_DDR_1;
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
ddr_size / 2,
lawbar1_target_id) < 0) {
printf("ERROR setting Local Access Windows for DDR\n");
return 0;
}
lawbar1_target_id = LAW_TRGT_IF_DDR_2;
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE + ddr_size / 2,
ddr_size / 2,
lawbar1_target_id) < 0) {
printf("ERROR setting Local Access Windows for DDR\n");
return 0;
}
#else
lawbar1_target_id = LAW_TRGT_IF_DDR_1;
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
ddr_size,
lawbar1_target_id) < 0) {
printf("ERROR setting Local Access Windows for DDR\n");
return 0;
}
#endif
}
return ddr_size;
}
struct board_specific_parameters {
u32 n_ranks;
u32 datarate_mhz_high;
u32 clk_adjust;
u32 wrlvl_start;
u32 cpo;
u32 write_data_delay;
u32 force_2t;
};
/*
* This table contains all valid speeds we want to override with board
* specific parameters. datarate_mhz_high values need to be in ascending order
* for each n_ranks group.
*/
static const struct board_specific_parameters udimm0[] = {
/*
* memory controller 0
* num| hi| clk| wrlvl | cpo |wrdata|2T
* ranks| mhz|adjst| start | |delay |
*/
{4, 850, 4, 6, 0xff, 2, 0},
{4, 950, 5, 7, 0xff, 2, 0},
{4, 1050, 5, 8, 0xff, 2, 0},
{4, 1250, 5, 10, 0xff, 2, 0},
{4, 1350, 5, 11, 0xff, 2, 0},
{4, 1666, 5, 12, 0xff, 2, 0},
{2, 850, 5, 6, 0xff, 2, 0},
{2, 1050, 5, 7, 0xff, 2, 0},
{2, 1250, 4, 6, 0xff, 2, 0},
{2, 1350, 5, 7, 0xff, 2, 0},
{2, 1666, 5, 8, 0xff, 2, 0},
{1, 1250, 4, 6, 0xff, 2, 0},
{1, 1335, 4, 7, 0xff, 2, 0},
{1, 1666, 4, 8, 0xff, 2, 0},
{}
};
/*
* The two slots have slightly different timing. The center values are good
* for both slots. We use identical speed tables for them. In future use, if
* DIMMs have fewer center values that require two separated tables, copy the
* udimm0 table to udimm1 and make changes to clk_adjust and wrlvl_start.
*/
static const struct board_specific_parameters *udimms[] = {
udimm0,
udimm0,
};
static const struct board_specific_parameters rdimm0[] = {
/*
* memory controller 0
* num| hi| clk| wrlvl | cpo |wrdata|2T
* ranks| mhz|adjst| start | |delay |
*/
{4, 850, 4, 6, 0xff, 2, 0},
{4, 950, 5, 7, 0xff, 2, 0},
{4, 1050, 5, 8, 0xff, 2, 0},
{4, 1250, 5, 10, 0xff, 2, 0},
{4, 1350, 5, 11, 0xff, 2, 0},
{4, 1666, 5, 12, 0xff, 2, 0},
{2, 850, 4, 6, 0xff, 2, 0},
{2, 1050, 4, 7, 0xff, 2, 0},
{2, 1666, 4, 8, 0xff, 2, 0},
{1, 850, 4, 5, 0xff, 2, 0},
{1, 950, 4, 7, 0xff, 2, 0},
{1, 1666, 4, 8, 0xff, 2, 0},
{}
};
/*
* The two slots have slightly different timing. See comments above.
*/
static const struct board_specific_parameters *rdimms[] = {
rdimm0,
rdimm0,
};
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
ulong ddr_freq;
if (ctrl_num > 1) {
printf("Wrong parameter for controller number %d", ctrl_num);
return;
}
if (!pdimm->n_ranks)
return;
if (popts->registered_dimm_en)
pbsp = rdimms[ctrl_num];
else
pbsp = udimms[ctrl_num];
/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(0) / 1000000;
while (pbsp->datarate_mhz_high) {
if (pbsp->n_ranks == pdimm->n_ranks) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->cpo_override = pbsp->cpo;
popts->write_data_delay =
pbsp->write_data_delay;
popts->clk_adjust = pbsp->clk_adjust;
popts->wrlvl_start = pbsp->wrlvl_start;
popts->twot_en = pbsp->force_2t;
goto found;
}
pbsp_highest = pbsp;
}
pbsp++;
}
if (pbsp_highest) {
printf("Error: board specific timing not found "
"for data rate %lu MT/s!\n"
"Trying to use the highest speed (%u) parameters\n",
ddr_freq, pbsp_highest->datarate_mhz_high);
popts->cpo_override = pbsp_highest->cpo;
popts->write_data_delay = pbsp_highest->write_data_delay;
popts->clk_adjust = pbsp_highest->clk_adjust;
popts->wrlvl_start = pbsp_highest->wrlvl_start;
popts->twot_en = pbsp_highest->force_2t;
} else {
panic("DIMM is not supported by this board");
}
found:
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
*/
popts->half_strength_driver_enable = 0;
/*
* Write leveling override
*/
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0xf;
/*
* Rtt and Rtt_WR override
*/
popts->rtt_override = 0;
/* Enable ZQ calibration */
popts->zq_en = 1;
/* DHC_EN =1, ODT = 60 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
}
int dram_init(void)
{
phys_size_t dram_size;
puts("Initializing....");
if (fsl_use_spd()) {
puts("using SPD\n");
dram_size = fsl_ddr_sdram();
} else {
puts("using fixed parameters\n");
dram_size = fixed_sdram();
}
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
debug(" DDR: ");
gd->ram_size = dram_size;
return 0;
}

526
board/freescale/corenet_ds/eth_hydra.c
View file

@ -1,526 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
* Author: Timur Tabi <timur@freescale.com>
*/
/*
* This file handles the board muxing between the Fman Ethernet MACs and
* the RGMII/SGMII/XGMII PHYs on a Freescale P3041/P5020 "Hydra" reference
* board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are
* provided by the standard Freescale four-port SGMII riser card. The 10Gb
* XGMII PHY is provided via the XAUI riser card. Since there is only one
* Fman device on a P3041 and P5020, we only support one SGMII card and one
* RGMII card.
*
* Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control
* muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is
* always the same (0). The value for SGMII depends on which slot the riser is
* inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII,
* the value is based on which slot the XAUI is inserted in.
*
* The SERDES configuration is used to determine where the SGMII and XAUI cards
* exist, and also which Fman MACs are routed to which PHYs. So for a given
* Fman MAC, there is one and only PHY it connects to. MACs cannot be routed
* to PHYs dynamically.
*
*
* This file also updates the device tree in three ways:
*
* 1) The status of each virtual MDIO node that is referenced by an Ethernet
* node is set to "okay".
*
* 2) The phy-handle property of each active Ethernet MAC node is set to the
* appropriate PHY node.
*
* 3) The "mux value" for each virtual MDIO node is set to the correct value,
* if necessary. Some virtual MDIO nodes do not have configurable mux
* values, so those values are hard-coded in the DTS. On the HYDRA board,
* the virtual MDIO node for the SGMII card needs to be updated.
*
* For all this to work, the device tree needs to have the following:
*
* 1) An alias for each PHY node that an Ethernet node could be routed to.
*
* 2) An alias for each real and virtual MDIO node that is disabled by default
* and might need to be enabled, and also might need to have its mux-value
* updated.
*/
#include <common.h>
#include <net.h>
#include <netdev.h>
#include <asm/fsl_serdes.h>
#include <fm_eth.h>
#include <fsl_mdio.h>
#include <malloc.h>
#include <fdt_support.h>
#include <fsl_dtsec.h>
#include "../common/ngpixis.h"
#include "../common/fman.h"
#ifdef CONFIG_FMAN_ENET
#define BRDCFG1_EMI1_SEL_MASK 0x78
#define BRDCFG1_EMI1_SEL_SLOT1 0x10
#define BRDCFG1_EMI1_SEL_SLOT2 0x20
#define BRDCFG1_EMI1_SEL_SLOT5 0x30
#define BRDCFG1_EMI1_SEL_SLOT6 0x40
#define BRDCFG1_EMI1_SEL_SLOT7 0x50
#define BRDCFG1_EMI1_SEL_RGMII 0x00
#define BRDCFG1_EMI1_EN 0x08
#define BRDCFG1_EMI2_SEL_MASK 0x06
#define BRDCFG1_EMI2_SEL_SLOT1 0x00
#define BRDCFG1_EMI2_SEL_SLOT2 0x02
#define BRDCFG2_REG_GPIO_SEL 0x20
#define PHY_BASE_ADDR 0x00
/*
* BRDCFG1 mask and value for each MAC
*
* This array contains the BRDCFG1 values (in mask/val format) that route the
* MDIO bus to a particular RGMII or SGMII PHY.
*/
struct {
u8 mask;
u8 val;
} mdio_mux[NUM_FM_PORTS];
/*
* Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
* that the mapping must be determined dynamically, or that the lane maps to
* something other than a board slot
*/
static u8 lane_to_slot[] = {
7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
};
/*
* Set the board muxing for a given MAC
*
* The MDIO layer calls this function every time it wants to talk to a PHY.
*/
void hydra_mux_mdio(u8 mask, u8 val)
{
clrsetbits_8(&pixis->brdcfg1, mask, val);
}
struct hydra_mdio {
u8 mask;
u8 val;
struct mii_dev *realbus;
};
static int hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
int regnum)
{
struct hydra_mdio *priv = bus->priv;
hydra_mux_mdio(priv->mask, priv->val);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct hydra_mdio *priv = bus->priv;
hydra_mux_mdio(priv->mask, priv->val);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int hydra_mdio_reset(struct mii_dev *bus)
{
struct hydra_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static void hydra_mdio_set_mux(char *name, u8 mask, u8 val)
{
struct mii_dev *bus = miiphy_get_dev_by_name(name);
struct hydra_mdio *priv = bus->priv;
priv->mask = mask;
priv->val = val;
}
static int hydra_mdio_init(char *realbusname, char *fakebusname)
{
struct hydra_mdio *hmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate Hydra MDIO bus\n");
return -1;
}
hmdio = malloc(sizeof(*hmdio));
if (!hmdio) {
printf("Failed to allocate Hydra private data\n");
free(bus);
return -1;
}
bus->read = hydra_mdio_read;
bus->write = hydra_mdio_write;
bus->reset = hydra_mdio_reset;
strcpy(bus->name, fakebusname);
hmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!hmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(hmdio);
return -1;
}
bus->priv = hmdio;
return mdio_register(bus);
}
/*
* Given an alias or a path for a node, set the mux value of that node.
*
* If 'alias' is not a valid alias, then it is treated as a full path to the
* node. No error checking is performed.
*
* This function is normally called to set the fsl,hydra-mdio-muxval property
* of a virtual MDIO node.
*/
static void fdt_set_mdio_mux(void *fdt, const char *alias, u32 mux)
{
const char *path = fdt_get_alias(fdt, alias);
if (!path)
path = alias;
do_fixup_by_path(fdt, path, "reg",
&mux, sizeof(mux), 1);
do_fixup_by_path(fdt, path, "fsl,hydra-mdio-muxval",
&mux, sizeof(mux), 1);
}
/*
* Given the following ...
*
* 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
* compatible string and 'addr' physical address)
*
* 2) An Fman port
*
* ... update the phy-handle property of the Ethernet node to point to the
* right PHY. This assumes that we already know the PHY for each port. That
* information is stored in mdio_mux[].
*
* The offset of the Fman Ethernet node is also passed in for convenience, but
* it is not used, and we recalculate the offset anyway.
*
* Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
* Inside the Fman, "ports" are things that connect to MACs. We only call them
* ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
* and ports are the same thing.
*
* Note that this code would be cleaner if had a function called
* fm_info_get_phy_address(), which returns a value from the fm1_dtsec_info[]
* array. That's because all we're doing is figuring out the PHY address for
* a given Fman MAC and writing it to the device tree. Well, we already did
* the hard work to figure that out in board_eth_init(), so it's silly to
* repeat that here.
*/
void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
enum fm_port port, int offset)
{
unsigned int mux = mdio_mux[port].val & mdio_mux[port].mask;
char phy[16];
if (port == FM1_10GEC1) {
/* XAUI */
int lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
/* The XAUI PHY is identified by the slot */
sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]);
fdt_set_phy_handle(fdt, compat, addr, phy);
}
return;
}
if (mux == (BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN)) {
/* RGMII */
/* The RGMII PHY is identified by the MAC connected to it */
sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
fdt_set_phy_handle(fdt, compat, addr, phy);
return;
}
/* If it's not RGMII or XGMII, it must be SGMII */
if (mux) {
/* The SGMII PHY is identified by the MAC connected to it */
sprintf(phy, "phy_sgmii_%x",
CONFIG_SYS_FM1_DTSEC1_PHY_ADDR + (port - FM1_DTSEC1));
fdt_set_phy_handle(fdt, compat, addr, phy);
}
}
#define PIXIS_SW2_LANE_23_SEL 0x80
#define PIXIS_SW2_LANE_45_SEL 0x40
#define PIXIS_SW2_LANE_67_SEL_MASK 0x30
#define PIXIS_SW2_LANE_67_SEL_5 0x00
#define PIXIS_SW2_LANE_67_SEL_6 0x20
#define PIXIS_SW2_LANE_67_SEL_7 0x10
#define PIXIS_SW2_LANE_8_SEL 0x08
#define PIXIS_SW2_LANE_1617_SEL 0x04
/*
* Initialize the lane_to_slot[] array.
*
* On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
* slots is hard-coded. On the Hydra board, however, the mapping is controlled
* by board switch SW2, so the lane_to_slot[] array needs to be dynamically
* initialized.
*/
static void initialize_lane_to_slot(void)
{
u8 sw2 = in_8(&PIXIS_SW(2));
lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
lane_to_slot[3] = lane_to_slot[2];
lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
lane_to_slot[5] = lane_to_slot[4];
switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
case PIXIS_SW2_LANE_67_SEL_5:
lane_to_slot[6] = 5;
break;
case PIXIS_SW2_LANE_67_SEL_6:
lane_to_slot[6] = 6;
break;
case PIXIS_SW2_LANE_67_SEL_7:
lane_to_slot[6] = 7;
break;
}
lane_to_slot[7] = lane_to_slot[6];
lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
lane_to_slot[17] = lane_to_slot[16];
}
#endif /* #ifdef CONFIG_FMAN_ENET */
/*
* Configure the status for the virtual MDIO nodes
*
* Rather than create the virtual MDIO nodes from scratch for each active
* virtual MDIO, we expect the DTS to have the nodes defined already, and we
* only enable the ones that are actually active.
*
* We assume that the DTS already hard-codes the status for all the
* virtual MDIO nodes to "disabled", so all we need to do is enable the
* active ones.
*
* For SGMII, we also need to set the mux value in the node.
*/
void fdt_fixup_board_enet(void *fdt)
{
#ifdef CONFIG_FMAN_ENET
unsigned int i;
int lane;
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
if (lane >= 0) {
fdt_status_okay_by_alias(fdt, "emi1_sgmii");
/* Also set the MUX value */
fdt_set_mdio_mux(fdt, "emi1_sgmii",
mdio_mux[i].val);
}
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
fdt_status_okay_by_alias(fdt, "emi1_rgmii");
break;
default:
break;
}
}
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0)
fdt_status_okay_by_alias(fdt, "emi2_xgmii");
#endif
}
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_FMAN_ENET
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
struct mii_dev *bus;
printf("Initializing Fman\n");
initialize_lane_to_slot();
/* We want to use the PIXIS to configure MUX routing, not GPIOs. */
setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
memset(mdio_mux, 0, sizeof(mdio_mux));
dtsec_mdio_info.regs =
(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
/* Register the real 1G MDIO bus */
fsl_pq_mdio_init(bis, &dtsec_mdio_info);
tgec_mdio_info.regs =
(struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
/* Register the real 10G MDIO bus */
fm_tgec_mdio_init(bis, &tgec_mdio_info);
/* Register the three virtual MDIO front-ends */
hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_RGMII_MDIO");
hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_SGMII_MDIO");
/*
* Program the DTSEC PHY addresses assuming that they are all SGMII.
* For any DTSEC that's RGMII, we'll override its PHY address later.
* We assume that DTSEC5 is only used for RGMII.
*/
fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
switch (slot) {
case 1:
/* Always DTSEC5 on Bank 3 */
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
BRDCFG1_EMI1_EN;
break;
case 2:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
BRDCFG1_EMI1_EN;
break;
case 5:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
BRDCFG1_EMI1_EN;
break;
case 6:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
BRDCFG1_EMI1_EN;
break;
case 7:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
BRDCFG1_EMI1_EN;
break;
};
hydra_mdio_set_mux("HYDRA_SGMII_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
fm_info_set_mdio(i,
miiphy_get_dev_by_name("HYDRA_SGMII_MDIO"));
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
/*
* If DTSEC4 is RGMII, then it's routed via via EC1 to
* the first on-board RGMII port. If DTSEC5 is RGMII,
* then it's routed via via EC2 to the second on-board
* RGMII port. The other DTSECs cannot be routed to
* RGMII.
*/
fm_info_set_phy_address(i, i == FM1_DTSEC4 ? 0 : 1);
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
BRDCFG1_EMI1_EN;
hydra_mdio_set_mux("HYDRA_RGMII_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
fm_info_set_mdio(i,
miiphy_get_dev_by_name("HYDRA_RGMII_MDIO"));
break;
case PHY_INTERFACE_MODE_NA:
fm_info_set_phy_address(i, 0);
break;
default:
printf("Fman1: DTSEC%u set to unknown interface %i\n",
idx + 1, fm_info_get_enet_if(i));
fm_info_set_phy_address(i, 0);
break;
}
}
bus = miiphy_get_dev_by_name("HYDRA_SGMII_MDIO");
set_sgmii_phy(bus, FM1_DTSEC1, CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR);
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
* need for Linux to do any muxing. This works because of the way
* BRDCFG1 is defined, but it's a bit hackish.
*
* The PHY address for the XAUI card depends on which slot it's in. The
* macros we use imply that the PHY address is based on which FM, but
* that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
* and FM2 could only use a XAUI in slot 4. On the Hydra board, we
* check the actual slot and just use the macros as-is, even though
* the P3041 and P5020 only have one Fman.
*/
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
slot = lane_to_slot[lane];
if (slot == 1) {
/* XAUI card is in slot 1 */
clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK,
BRDCFG1_EMI2_SEL_SLOT1);
fm_info_set_phy_address(FM1_10GEC1,
CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
} else {
/* XAUI card is in slot 2 */
clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK,
BRDCFG1_EMI2_SEL_SLOT2);
fm_info_set_phy_address(FM1_10GEC1,
CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
}
}
fm_info_set_mdio(FM1_10GEC1,
miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
cpu_eth_init(bis);
#endif
return pci_eth_init(bis);
}

489
board/freescale/corenet_ds/eth_p4080.c
View file

@ -1,489 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <command.h>
#include <fdt_support.h>
#include <net.h>
#include <netdev.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <malloc.h>
#include <fm_eth.h>
#include <fsl_mdio.h>
#include <miiphy.h>
#include <phy.h>
#include <linux/delay.h>
#include "../common/ngpixis.h"
#include "../common/fman.h"
#include <fsl_dtsec.h>
#define EMI_NONE 0xffffffff
#define EMI_MASK 0xf0000000
#define EMI1_RGMII 0x0
#define EMI1_SLOT3 0x80000000 /* bank1 EFGH */
#define EMI1_SLOT4 0x40000000 /* bank2 ABCD */
#define EMI1_SLOT5 0xc0000000 /* bank3 ABCD */
#define EMI2_SLOT4 0x10000000 /* bank2 ABCD */
#define EMI2_SLOT5 0x30000000 /* bank3 ABCD */
#define EMI1_MASK 0xc0000000
#define EMI2_MASK 0x30000000
#define PHY_BASE_ADDR 0x00
#define PHY_BASE_ADDR_SLOT5 0x10
static int mdio_mux[NUM_FM_PORTS];
static char *mdio_names[16] = {
"P4080DS_MDIO0",
"P4080DS_MDIO1",
NULL,
"P4080DS_MDIO3",
"P4080DS_MDIO4",
NULL, NULL, NULL,
"P4080DS_MDIO8",
NULL, NULL, NULL,
"P4080DS_MDIO12",
NULL, NULL, NULL,
};
/*
* Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
* that the mapping must be determined dynamically, or that the lane maps to
* something other than a board slot.
*/
static u8 lane_to_slot[] = {
1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5
};
static char *p4080ds_mdio_name_for_muxval(u32 muxval)
{
return mdio_names[(muxval & EMI_MASK) >> 28];
}
struct mii_dev *mii_dev_for_muxval(u32 muxval)
{
struct mii_dev *bus;
char *name = p4080ds_mdio_name_for_muxval(muxval);
if (!name) {
printf("No bus for muxval %x\n", muxval);
return NULL;
}
bus = miiphy_get_dev_by_name(name);
if (!bus) {
printf("No bus by name %s\n", name);
return NULL;
}
return bus;
}
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) && defined(CONFIG_PHY_TERANETICS)
int board_phy_config(struct phy_device *phydev)
{
if (phydev->drv->config)
phydev->drv->config(phydev);
if (phydev->drv->uid == PHY_UID_TN2020) {
unsigned long timeout = 1 * 1000; /* 1 seconds */
enum srds_prtcl device;
/*
* Wait for the XAUI to come out of reset. This is when it
* starts transmitting alignment signals.
*/
while (--timeout) {
int reg = phy_read(phydev, MDIO_MMD_PHYXS, MDIO_CTRL1);
if (reg < 0) {
printf("TN2020: Error reading from PHY at "
"address %u\n", phydev->addr);
break;
}
/*
* Note that we've never actually seen
* MDIO_CTRL1_RESET set to 1.
*/
if ((reg & MDIO_CTRL1_RESET) == 0)
break;
udelay(1000);
}
if (!timeout) {
printf("TN2020: Timeout waiting for PHY at address %u "
" to reset.\n", phydev->addr);
}
switch (phydev->addr) {
case CONFIG_SYS_FM1_10GEC1_PHY_ADDR:
device = XAUI_FM1;
break;
case CONFIG_SYS_FM2_10GEC1_PHY_ADDR:
device = XAUI_FM2;
break;
default:
device = NONE;
}
serdes_reset_rx(device);
}
return 0;
}
#endif
struct p4080ds_mdio {
u32 muxval;
struct mii_dev *realbus;
};
static void p4080ds_mux_mdio(u32 muxval)
{
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
uint gpioval = in_be32(&pgpio->gpdat) & ~(EMI_MASK);
gpioval |= muxval;
out_be32(&pgpio->gpdat, gpioval);
}
static int p4080ds_mdio_read(struct mii_dev *bus, int addr, int devad,
int regnum)
{
struct p4080ds_mdio *priv = bus->priv;
p4080ds_mux_mdio(priv->muxval);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int p4080ds_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct p4080ds_mdio *priv = bus->priv;
p4080ds_mux_mdio(priv->muxval);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int p4080ds_mdio_reset(struct mii_dev *bus)
{
struct p4080ds_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static int p4080ds_mdio_init(char *realbusname, u32 muxval)
{
struct p4080ds_mdio *pmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate P4080DS MDIO bus\n");
return -1;
}
pmdio = malloc(sizeof(*pmdio));
if (!pmdio) {
printf("Failed to allocate P4080DS private data\n");
free(bus);
return -1;
}
bus->read = p4080ds_mdio_read;
bus->write = p4080ds_mdio_write;
bus->reset = p4080ds_mdio_reset;
sprintf(bus->name, p4080ds_mdio_name_for_muxval(muxval));
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!pmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(pmdio);
return -1;
}
pmdio->muxval = muxval;
bus->priv = pmdio;
return mdio_register(bus);
}
void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
enum fm_port port, int offset)
{
if (mdio_mux[port] == EMI1_RGMII)
fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
if (mdio_mux[port] == EMI1_SLOT3) {
int idx = port - FM2_DTSEC1 + 5;
char phy[16];
sprintf(phy, "phy%d_slot3", idx);
fdt_set_phy_handle(blob, prop, pa, phy);
}
}
void fdt_fixup_board_enet(void *fdt)
{
int i;
/*
* P4080DS can be configured in many different ways, supporting a number
* of combinations of ethernet devices and phy types. In order to
* have just one device tree for all of those configurations, we fix up
* the tree here. By default, the device tree configures FM1 and FM2
* for SGMII, and configures XAUI on both 10G interfaces. So we have
* a number of different variables to track:
*
* 1) Whether the device is configured at all. Whichever devices are
* not enabled should be disabled by setting the "status" property
* to "disabled".
* 2) What the PHY interface is. If this is an RGMII connection,
* we should change the "phy-connection-type" property to
* "rgmii"
* 3) Which PHY is being used. Because the MDIO buses are muxed,
* we need to redirect the "phy-handle" property to point at the
* PHY on the right slot/bus.
*/
/* We've got six MDIO nodes that may or may not need to exist */
fdt_status_disabled_by_alias(fdt, "emi1_slot3");
fdt_status_disabled_by_alias(fdt, "emi1_slot4");
fdt_status_disabled_by_alias(fdt, "emi1_slot5");
fdt_status_disabled_by_alias(fdt, "emi2_slot4");
fdt_status_disabled_by_alias(fdt, "emi2_slot5");
for (i = 0; i < NUM_FM_PORTS; i++) {
switch (mdio_mux[i]) {
case EMI1_SLOT3:
fdt_status_okay_by_alias(fdt, "emi1_slot3");
break;
case EMI1_SLOT4:
fdt_status_okay_by_alias(fdt, "emi1_slot4");
break;
case EMI1_SLOT5:
fdt_status_okay_by_alias(fdt, "emi1_slot5");
break;
case EMI2_SLOT4:
fdt_status_okay_by_alias(fdt, "emi2_slot4");
break;
case EMI2_SLOT5:
fdt_status_okay_by_alias(fdt, "emi2_slot5");
break;
}
}
}
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_FMAN_ENET
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
int i;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
struct mii_dev *bus;
/* Initialize the mdio_mux array so we can recognize empty elements */
for (i = 0; i < NUM_FM_PORTS; i++)
mdio_mux[i] = EMI_NONE;
/* The first 4 GPIOs are outputs to control MDIO bus muxing */
out_be32(&pgpio->gpdir, EMI_MASK);
dtsec_mdio_info.regs =
(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
/* Register the 1G MDIO bus */
fsl_pq_mdio_init(bis, &dtsec_mdio_info);
tgec_mdio_info.regs =
(struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
/* Register the 10G MDIO bus */
fm_tgec_mdio_init(bis, &tgec_mdio_info);
/* Register the 6 muxing front-ends to the MDIO buses */
p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT4);
p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT5);
fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
#if (CONFIG_SYS_NUM_FMAN == 2)
fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC3_PHY_ADDR);
fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC4_PHY_ADDR);
fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
#endif
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1, lane, slot;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
switch (slot) {
case 3:
mdio_mux[i] = EMI1_SLOT3;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
case 4:
mdio_mux[i] = EMI1_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
case 5:
mdio_mux[i] = EMI1_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
};
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
fm_info_set_phy_address(i, 0);
mdio_mux[i] = EMI1_RGMII;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
default:
break;
}
}
bus = mii_dev_for_muxval(EMI1_SLOT5);
set_sgmii_phy(bus, FM1_DTSEC1,
CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5);
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
int idx = i - FM1_10GEC1, lane, slot;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
lane = serdes_get_first_lane(XAUI_FM1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
switch (slot) {
case 4:
mdio_mux[i] = EMI2_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
case 5:
mdio_mux[i] = EMI2_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
};
break;
default:
break;
}
}
#if (CONFIG_SYS_NUM_FMAN == 2)
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
int idx = i - FM2_DTSEC1, lane, slot;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
switch (slot) {
case 3:
mdio_mux[i] = EMI1_SLOT3;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
case 4:
mdio_mux[i] = EMI1_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
case 5:
mdio_mux[i] = EMI1_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
};
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
fm_info_set_phy_address(i, 0);
mdio_mux[i] = EMI1_RGMII;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
default:
break;
}
}
bus = mii_dev_for_muxval(EMI1_SLOT3);
set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
bus = mii_dev_for_muxval(EMI1_SLOT4);
set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
int idx = i - FM2_10GEC1, lane, slot;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
lane = serdes_get_first_lane(XAUI_FM2 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
switch (slot) {
case 4:
mdio_mux[i] = EMI2_SLOT4;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
case 5:
mdio_mux[i] = EMI2_SLOT5;
fm_info_set_mdio(i,
mii_dev_for_muxval(mdio_mux[i]));
break;
};
break;
default:
break;
}
}
#endif
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */
return pci_eth_init(bis);
}

783
board/freescale/corenet_ds/eth_superhydra.c
View file

@ -1,783 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
* Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
*/
/*
* This file handles the board muxing between the Fman Ethernet MACs and
* the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference
* board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are
* provided by the standard Freescale four-port SGMII riser card. The 10Gb
* XGMII PHYs are provided via the XAUI riser card. The P5040 has 2 FMans
* and 5 1G interfaces and 10G interface per FMan. Based on the options in
* the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time.
*
* Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control
* muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is
* always the same (0). The value for SGMII depends on which slot the riser is
* inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII,
* the value is based on which slot the XAUI is inserted in.
*
* The SERDES configuration is used to determine where the SGMII and XAUI cards
* exist, and also which Fman's MACs are routed to which PHYs. So for a given
* Fman MAC, there is one and only PHY it connects to. MACs cannot be routed
* to PHYs dynamically.
*
*
* This file also updates the device tree in three ways:
*
* 1) The status of each virtual MDIO node that is referenced by an Ethernet
* node is set to "okay".
*
* 2) The phy-handle property of each active Ethernet MAC node is set to the
* appropriate PHY node.
*
* 3) The "mux value" for each virtual MDIO node is set to the correct value,
* if necessary. Some virtual MDIO nodes do not have configurable mux
* values, so those values are hard-coded in the DTS. On the HYDRA board,
* the virtual MDIO node for the SGMII card needs to be updated.
*
* For all this to work, the device tree needs to have the following:
*
* 1) An alias for each PHY node that an Ethernet node could be routed to.
*
* 2) An alias for each real and virtual MDIO node that is disabled by default
* and might need to be enabled, and also might need to have its mux-value
* updated.
*/
#include <common.h>
#include <log.h>
#include <net.h>
#include <netdev.h>
#include <asm/fsl_serdes.h>
#include <fm_eth.h>
#include <fsl_mdio.h>
#include <malloc.h>
#include <fdt_support.h>
#include <fsl_dtsec.h>
#include "../common/ngpixis.h"
#include "../common/fman.h"
#ifdef CONFIG_FMAN_ENET
#define BRDCFG1_EMI1_SEL_MASK 0x70
#define BRDCFG1_EMI1_SEL_SLOT1 0x10
#define BRDCFG1_EMI1_SEL_SLOT2 0x20
#define BRDCFG1_EMI1_SEL_SLOT5 0x30
#define BRDCFG1_EMI1_SEL_SLOT6 0x40
#define BRDCFG1_EMI1_SEL_SLOT7 0x50
#define BRDCFG1_EMI1_SEL_SLOT3 0x60
#define BRDCFG1_EMI1_SEL_RGMII 0x00
#define BRDCFG1_EMI1_EN 0x08
#define BRDCFG1_EMI2_SEL_MASK 0x06
#define BRDCFG1_EMI2_SEL_SLOT1 0x00
#define BRDCFG1_EMI2_SEL_SLOT2 0x02
#define BRDCFG2_REG_GPIO_SEL 0x20
/* SGMII */
#define PHY_BASE_ADDR 0x00
#define REGNUM 0x00
#define PORT_NUM_FM1 0x04
#define PORT_NUM_FM2 0x02
/*
* BRDCFG1 mask and value for each MAC
*
* This array contains the BRDCFG1 values (in mask/val format) that route the
* MDIO bus to a particular RGMII or SGMII PHY.
*/
static struct {
u8 mask;
u8 val;
} mdio_mux[NUM_FM_PORTS];
/*
* Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
* that the mapping must be determined dynamically, or that the lane maps to
* something other than a board slot
*/
static u8 lane_to_slot[] = {
7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0
};
/*
* Set the board muxing for a given MAC
*
* The MDIO layer calls this function every time it wants to talk to a PHY.
*/
void super_hydra_mux_mdio(u8 mask, u8 val)
{
clrsetbits_8(&pixis->brdcfg1, mask, val);
}
struct super_hydra_mdio {
u8 mask;
u8 val;
struct mii_dev *realbus;
};
static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
int regnum)
{
struct super_hydra_mdio *priv = bus->priv;
super_hydra_mux_mdio(priv->mask, priv->val);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct super_hydra_mdio *priv = bus->priv;
super_hydra_mux_mdio(priv->mask, priv->val);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int super_hydra_mdio_reset(struct mii_dev *bus)
{
struct super_hydra_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val)
{
struct mii_dev *bus = miiphy_get_dev_by_name(name);
struct super_hydra_mdio *priv = bus->priv;
priv->mask = mask;
priv->val = val;
}
static int super_hydra_mdio_init(char *realbusname, char *fakebusname)
{
struct super_hydra_mdio *hmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate Hydra MDIO bus\n");
return -1;
}
hmdio = malloc(sizeof(*hmdio));
if (!hmdio) {
printf("Failed to allocate Hydra private data\n");
free(bus);
return -1;
}
bus->read = super_hydra_mdio_read;
bus->write = super_hydra_mdio_write;
bus->reset = super_hydra_mdio_reset;
strcpy(bus->name, fakebusname);
hmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!hmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(hmdio);
return -1;
}
bus->priv = hmdio;
return mdio_register(bus);
}
/*
* Given the following ...
*
* 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
* compatible string and 'addr' physical address)
*
* 2) An Fman port
*
* ... update the phy-handle property of the Ethernet node to point to the
* right PHY. This assumes that we already know the PHY for each port. That
* information is stored in mdio_mux[].
*
* The offset of the Fman Ethernet node is also passed in for convenience, but
* it is not used.
*
* Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
* Inside the Fman, "ports" are things that connect to MACs. We only call them
* ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
* and ports are the same thing.
*/
void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
enum fm_port port, int offset)
{
enum srds_prtcl device;
int lane, slot, phy;
char alias[32];
/* RGMII and XGMII are already mapped correctly in the DTS */
if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
device = serdes_device_from_fm_port(port);
lane = serdes_get_first_lane(device);
slot = lane_to_slot[lane];
phy = fm_info_get_phy_address(port);
sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
}
}
#define PIXIS_SW2_LANE_23_SEL 0x80
#define PIXIS_SW2_LANE_45_SEL 0x40
#define PIXIS_SW2_LANE_67_SEL_MASK 0x30
#define PIXIS_SW2_LANE_67_SEL_5 0x00
#define PIXIS_SW2_LANE_67_SEL_6 0x20
#define PIXIS_SW2_LANE_67_SEL_7 0x10
#define PIXIS_SW2_LANE_8_SEL 0x08
#define PIXIS_SW2_LANE_1617_SEL 0x04
#define PIXIS_SW11_LANE_9_SEL 0x04
/*
* Initialize the lane_to_slot[] array.
*
* On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
* slots is hard-coded. On the Hydra board, however, the mapping is controlled
* by board switch SW2, so the lane_to_slot[] array needs to be dynamically
* initialized.
*/
static void initialize_lane_to_slot(void)
{
u8 sw2 = in_8(&PIXIS_SW(2));
/* SW11 appears in the programming model as SW9 */
u8 sw11 = in_8(&PIXIS_SW(9));
lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
lane_to_slot[3] = lane_to_slot[2];
lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
lane_to_slot[5] = lane_to_slot[4];
switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
case PIXIS_SW2_LANE_67_SEL_5:
lane_to_slot[6] = 5;
break;
case PIXIS_SW2_LANE_67_SEL_6:
lane_to_slot[6] = 6;
break;
case PIXIS_SW2_LANE_67_SEL_7:
lane_to_slot[6] = 7;
break;
}
lane_to_slot[7] = lane_to_slot[6];
lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3;
lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
lane_to_slot[17] = lane_to_slot[16];
}
#endif /* #ifdef CONFIG_FMAN_ENET */
/*
* Configure the status for the virtual MDIO nodes
*
* Rather than create the virtual MDIO nodes from scratch for each active
* virtual MDIO, we expect the DTS to have the nodes defined already, and we
* only enable the ones that are actually active.
*
* We assume that the DTS already hard-codes the status for all the
* virtual MDIO nodes to "disabled", so all we need to do is enable the
* active ones.
*/
void fdt_fixup_board_enet(void *fdt)
{
#ifdef CONFIG_FMAN_ENET
enum fm_port i;
int lane, slot;
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
if (lane >= 0) {
char alias[32];
slot = lane_to_slot[lane];
sprintf(alias, "hydra_sg_slot%u", slot);
fdt_status_okay_by_alias(fdt, alias);
debug("Enabled MDIO node %s (slot %i)\n",
alias, slot);
}
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
fdt_status_okay_by_alias(fdt, "hydra_rg");
debug("Enabled MDIO node hydra_rg\n");
break;
default:
break;
}
}
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
char alias[32];
slot = lane_to_slot[lane];
sprintf(alias, "hydra_xg_slot%u", slot);
fdt_status_okay_by_alias(fdt, alias);
debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
}
#if CONFIG_SYS_NUM_FMAN == 2
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
int idx = i - FM2_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
if (lane >= 0) {
char alias[32];
slot = lane_to_slot[lane];
sprintf(alias, "hydra_sg_slot%u", slot);
fdt_status_okay_by_alias(fdt, alias);
debug("Enabled MDIO node %s (slot %i)\n",
alias, slot);
}
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
fdt_status_okay_by_alias(fdt, "hydra_rg");
debug("Enabled MDIO node hydra_rg\n");
break;
default:
break;
}
}
lane = serdes_get_first_lane(XAUI_FM2);
if (lane >= 0) {
char alias[32];
slot = lane_to_slot[lane];
sprintf(alias, "hydra_xg_slot%u", slot);
fdt_status_okay_by_alias(fdt, alias);
debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
}
#endif /* CONFIG_SYS_NUM_FMAN == 2 */
#endif /* CONFIG_FMAN_ENET */
}
/*
* Mapping of SerDes Protocol to MDIO MUX value and PHY address.
*
* Fman 1:
* DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4
* Mux Phy | Mux Phy | Mux Phy | Mux Phy
* Value Addr | Value Addr | Value Addr | Value Addr
* 0x00 2 1c | 2 1d | 2 1e | 2 1f
* 0x01 | | 6 1c |
* 0x02 | | 3 1c | 3 1d
* 0x03 2 1c | 2 1d | 2 1e | 2 1f
* 0x04 2 1c | 2 1d | 2 1e | 2 1f
* 0x05 | | 3 1c | 3 1d
* 0x06 2 1c | 2 1d | 2 1e | 2 1f
* 0x07 | | 6 1c |
* 0x11 2 1c | 2 1d | 2 1e | 2 1f
* 0x2a 2 | | 2 1e | 2 1f
* 0x34 6 1c | 6 1d | 4 1e | 4 1f
* 0x35 | | 3 1c | 3 1d
* 0x36 6 1c | 6 1d | 4 1e | 4 1f
* | | |
* Fman 2: | | |
* DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4
* EMI1 | EMI1 | EMI1 | EMI1
* Mux Phy | Mux Phy | Mux Phy | Mux Phy
* Value Addr | Value Addr | Value Addr | Value Addr
* 0x00 | | 6 1c | 6 1d
* 0x01 | | |
* 0x02 | | 6 1c | 6 1d
* 0x03 3 1c | 3 1d | 6 1c | 6 1d
* 0x04 3 1c | 3 1d | 6 1c | 6 1d
* 0x05 | | 6 1c | 6 1d
* 0x06 | | 6 1c | 6 1d
* 0x07 | | |
* 0x11 | | |
* 0x2a | | |
* 0x34 | | |
* 0x35 | | |
* 0x36 | | |
*/
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_FMAN_ENET
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
struct mii_dev *bus;
int qsgmii;
int phy_real_addr;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
printf("Initializing Fman\n");
initialize_lane_to_slot();
/* We want to use the PIXIS to configure MUX routing, not GPIOs. */
setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
memset(mdio_mux, 0, sizeof(mdio_mux));
dtsec_mdio_info.regs =
(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
/* Register the real 1G MDIO bus */
fsl_pq_mdio_init(bis, &dtsec_mdio_info);
tgec_mdio_info.regs =
(struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
/* Register the real 10G MDIO bus */
fm_tgec_mdio_init(bis, &tgec_mdio_info);
/* Register the three virtual MDIO front-ends */
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
"SUPER_HYDRA_RGMII_MDIO");
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
"SUPER_HYDRA_FM1_SGMII_MDIO");
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
"SUPER_HYDRA_FM2_SGMII_MDIO");
super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
"SUPER_HYDRA_FM3_SGMII_MDIO");
super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
"SUPER_HYDRA_FM1_TGEC_MDIO");
super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
"SUPER_HYDRA_FM2_TGEC_MDIO");
/*
* Program the DTSEC PHY addresses assuming that they are all SGMII.
* For any DTSEC that's RGMII, we'll override its PHY address later.
* We assume that DTSEC5 is only used for RGMII.
*/
fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
#if (CONFIG_SYS_NUM_FMAN == 2)
fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
#endif
switch (srds_prtcl) {
case 0:
case 3:
case 4:
case 6:
case 0x11:
case 0x2a:
case 0x34:
case 0x36:
fm_info_set_phy_address(FM1_DTSEC3,
CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
break;
case 1:
case 2:
case 5:
case 7:
case 0x35:
fm_info_set_phy_address(FM1_DTSEC3,
CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
break;
default:
printf("Fman: Unsupport SerDes Protocol 0x%02x\n", srds_prtcl);
break;
}
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
debug("FM1@DTSEC%u expects SGMII in slot %u\n",
idx + 1, slot);
switch (slot) {
case 1:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
BRDCFG1_EMI1_EN;
break;
case 2:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
BRDCFG1_EMI1_EN;
break;
case 3:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
BRDCFG1_EMI1_EN;
break;
case 5:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
BRDCFG1_EMI1_EN;
break;
case 6:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
BRDCFG1_EMI1_EN;
break;
case 7:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
BRDCFG1_EMI1_EN;
break;
};
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
fm_info_set_mdio(i,
miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO"));
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
/*
* FM1 DTSEC5 is routed via EC1 to the first on-board
* RGMII port. FM2 DTSEC5 is routed via EC2 to the
* second on-board RGMII port. The other DTSECs cannot
* be routed to RGMII.
*/
debug("FM1@DTSEC%u is RGMII at address %u\n",
idx + 1, 0);
fm_info_set_phy_address(i, 0);
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
BRDCFG1_EMI1_EN;
super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
fm_info_set_mdio(i,
miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
break;
case PHY_INTERFACE_MODE_NA:
fm_info_set_phy_address(i, 0);
break;
default:
printf("Fman1: DTSEC%u set to unknown interface %i\n",
idx + 1, fm_info_get_enet_if(i));
fm_info_set_phy_address(i, 0);
break;
}
}
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO");
qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM_FM1, REGNUM);
if (qsgmii) {
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + PORT_NUM_FM1; i++) {
if (fm_info_get_enet_if(i) ==
PHY_INTERFACE_MODE_SGMII) {
phy_real_addr = PHY_BASE_ADDR + i - FM1_DTSEC1;
fm_info_set_phy_address(i, phy_real_addr);
}
}
switch (srds_prtcl) {
case 0x00:
case 0x03:
case 0x04:
case 0x06:
case 0x11:
case 0x2a:
case 0x34:
case 0x36:
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 2);
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 3);
break;
case 0x01:
case 0x02:
case 0x05:
case 0x07:
case 0x35:
fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 0);
fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1);
break;
default:
break;
}
}
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
* need for Linux to do any muxing. This works because of the way
* BRDCFG1 is defined, but it's a bit hackish.
*
* The PHY address for the XAUI card depends on which slot it's in. The
* macros we use imply that the PHY address is based on which FM, but
* that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
* and FM2 could only use a XAUI in slot 4. On the Hydra board, we
* check the actual slot and just use the macros as-is, even though
* the P3041 and P5020 only have one Fman.
*/
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
fm_info_set_mdio(FM1_10GEC1,
miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO"));
#if (CONFIG_SYS_NUM_FMAN == 2)
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
int idx = i - FM2_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
if (lane < 0)
break;
slot = lane_to_slot[lane];
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
debug("FM2@DTSEC%u expects SGMII in slot %u\n",
idx + 1, slot);
switch (slot) {
case 1:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
BRDCFG1_EMI1_EN;
break;
case 2:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
BRDCFG1_EMI1_EN;
break;
case 3:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
BRDCFG1_EMI1_EN;
break;
case 5:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
BRDCFG1_EMI1_EN;
break;
case 6:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
BRDCFG1_EMI1_EN;
break;
case 7:
mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
BRDCFG1_EMI1_EN;
break;
};
if (i == FM2_DTSEC1 || i == FM2_DTSEC2) {
super_hydra_mdio_set_mux(
"SUPER_HYDRA_FM3_SGMII_MDIO",
mdio_mux[i].mask,
mdio_mux[i].val);
fm_info_set_mdio(i, miiphy_get_dev_by_name(
"SUPER_HYDRA_FM3_SGMII_MDIO"));
} else {
super_hydra_mdio_set_mux(
"SUPER_HYDRA_FM2_SGMII_MDIO",
mdio_mux[i].mask,
mdio_mux[i].val);
fm_info_set_mdio(i, miiphy_get_dev_by_name(
"SUPER_HYDRA_FM2_SGMII_MDIO"));
}
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
/*
* FM1 DTSEC5 is routed via EC1 to the first on-board
* RGMII port. FM2 DTSEC5 is routed via EC2 to the
* second on-board RGMII port. The other DTSECs cannot
* be routed to RGMII.
*/
debug("FM2@DTSEC%u is RGMII at address %u\n",
idx + 1, 1);
fm_info_set_phy_address(i, 1);
mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
BRDCFG1_EMI1_EN;
super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
fm_info_set_mdio(i,
miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
break;
case PHY_INTERFACE_MODE_NA:
fm_info_set_phy_address(i, 0);
break;
default:
printf("Fman2: DTSEC%u set to unknown interface %i\n",
idx + 1, fm_info_get_enet_if(i));
fm_info_set_phy_address(i, 0);
break;
}
}
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO");
set_sgmii_phy(bus, FM2_DTSEC3, PORT_NUM_FM2, PHY_BASE_ADDR);
bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM3_SGMII_MDIO");
set_sgmii_phy(bus, FM2_DTSEC1, PORT_NUM_FM2, PHY_BASE_ADDR);
/*
* For 10G, we only support one XAUI card per Fman. If present, then we
* force its routing and never touch those bits again, which removes the
* need for Linux to do any muxing. This works because of the way
* BRDCFG1 is defined, but it's a bit hackish.
*
* The PHY address for the XAUI card depends on which slot it's in. The
* macros we use imply that the PHY address is based on which FM, but
* that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
* and FM2 could only use a XAUI in slot 4. On the Hydra board, we
* check the actual slot and just use the macros as-is, even though
* the P3041 and P5020 only have one Fman.
*/
lane = serdes_get_first_lane(XAUI_FM2);
if (lane >= 0) {
debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
fm_info_set_mdio(FM2_10GEC1,
miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO"));
#endif
cpu_eth_init(bis);
#endif
return pci_eth_init(bis);
}

11
board/freescale/corenet_ds/p3041ds_ddr.c
View file

@ -1,11 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <fsl_ddr_sdram.h>
fixed_ddr_parm_t fixed_ddr_parm_0[] = {
{0, 0, NULL}
};

346
board/freescale/corenet_ds/p4080ds_ddr.c
View file

@ -1,346 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <fsl_ddr_sdram.h>
#define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000
#define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104
#define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45
#define CONFIG_SYS_DDR_TIMING_2_1200 0x0FB8A912
#define CONFIG_SYS_DDR_MODE_1_1200 0x00441A40
#define CONFIG_SYS_DDR_MODE_2_1200 0x00100000
#define CONFIG_SYS_DDR_INTERVAL_1200 0x12480100
#define CONFIG_SYS_DDR_CLK_CTRL_1200 0x02800000
#define CONFIG_SYS_DDR_TIMING_3_1000 0x00020000
#define CONFIG_SYS_DDR_TIMING_0_1000 0xCC440104
#define CONFIG_SYS_DDR_TIMING_1_1000 0x727DF944
#define CONFIG_SYS_DDR_TIMING_2_1000 0x0FB088CF
#define CONFIG_SYS_DDR_MODE_1_1000 0x00441830
#define CONFIG_SYS_DDR_MODE_2_1000 0x00080000
#define CONFIG_SYS_DDR_INTERVAL_1000 0x0F3C0100
#define CONFIG_SYS_DDR_CLK_CTRL_1000 0x02800000
#define CONFIG_SYS_DDR_TIMING_3_900 0x00020000
#define CONFIG_SYS_DDR_TIMING_0_900 0xCC440104
#define CONFIG_SYS_DDR_TIMING_1_900 0x616ba844
#define CONFIG_SYS_DDR_TIMING_2_900 0x0fb088ce
#define CONFIG_SYS_DDR_MODE_1_900 0x00441620
#define CONFIG_SYS_DDR_MODE_2_900 0x00080000
#define CONFIG_SYS_DDR_INTERVAL_900 0x0db60100
#define CONFIG_SYS_DDR_CLK_CTRL_900 0x02800000
#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000
#define CONFIG_SYS_DDR_TIMING_0_800 0xcc330104
#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b4744
#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cc
#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
#define CONFIG_SYS_DDR_MODE_2_800 0x00000000
#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
#define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000
#define CONFIG_SYS_DDR_CS0_BNDS 0x000000FF
#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
#define CONFIG_SYS_DDR_CS2_BNDS 0x000000FF
#define CONFIG_SYS_DDR_CS3_BNDS 0x000000FF
#define CONFIG_SYS_DDR2_CS0_BNDS 0x000000FF
#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000
#define CONFIG_SYS_DDR2_CS2_BNDS 0x000000FF
#define CONFIG_SYS_DDR2_CS3_BNDS 0x000000FF
#define CONFIG_SYS_DDR_CS0_CONFIG 0xA0044202
#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202
#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000
#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000
#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80044202
#define CONFIG_SYS_DDR2_CS1_CONFIG 0x80004202
#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000
#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000
#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202
#define CONFIG_SYS_DDR_TIMING_4 0x00000001
#define CONFIG_SYS_DDR_TIMING_5 0x02401400
#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F607
#define CONFIG_SYS_DDR_SDRAM_CFG 0xE7044000
#define CONFIG_SYS_DDR_SDRAM_CFG2 0x24401031
#define CONFIG_SYS_DDR_RCW_1 0x00000000
#define CONFIG_SYS_DDR_RCW_2 0x00000000
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_800_2nd = {
.cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = {
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_900_2nd = {
.cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = {
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_1000_2nd = {
.cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = {
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fsl_ddr_cfg_regs_t ddr_cfg_regs_1200_2nd = {
.cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS,
.cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS,
.cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS,
.cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS,
.cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG,
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
.cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG,
.cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG,
.cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG,
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200,
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200,
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200,
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200,
.ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200,
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200,
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200,
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200,
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
};
fixed_ddr_parm_t fixed_ddr_parm_0[] = {
{750, 850, &ddr_cfg_regs_800},
{850, 950, &ddr_cfg_regs_900},
{950, 1050, &ddr_cfg_regs_1000},
{1050, 1250, &ddr_cfg_regs_1200},
{0, 0, NULL}
};
fixed_ddr_parm_t fixed_ddr_parm_1[] = {
{750, 850, &ddr_cfg_regs_800_2nd},
{850, 950, &ddr_cfg_regs_900_2nd},
{950, 1050, &ddr_cfg_regs_1000_2nd},
{1050, 1250, &ddr_cfg_regs_1200_2nd},
{0, 0, NULL}
};

15
board/freescale/corenet_ds/p5040ds_ddr.c
View file

@ -1,15 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <fsl_ddr_sdram.h>
fixed_ddr_parm_t fixed_ddr_parm_0[] = {
{0, 0, NULL}
};
fixed_ddr_parm_t fixed_ddr_parm_1[] = {
{0, 0, NULL}
};

11
board/freescale/corenet_ds/rcw_p3041ds.cfg
View file

@ -1,11 +0,0 @@
#
# Default RCW for P3041DS.
#
#PBL preamble and RCW header
aa55aa55 010e0100
#64 bytes RCW data
12600000 00000000 241C0000 00000000
D8984A01 03002000 58000000 41000000
00000000 00000000 00000000 10070000
00000000 00000000 00000000 00000000

11
board/freescale/corenet_ds/rcw_p4080ds.cfg
View file

@ -1,11 +0,0 @@
#
# Default RCW for P4080DS.
#
#PBL preamble and RCW header
aa55aa55 010e0100
#64 bytes RCW data
105a0000 00000000 1e1e181e 0000cccc
58400000 3c3c2000 58000000 e1000000
00000000 00000000 00000000 008b6000
00000000 00000000 00000000 00000000

11
board/freescale/corenet_ds/rcw_p5040ds.cfg
View file

@ -1,11 +0,0 @@
#
# Default RCW for P5040DS.
#
#PBL preamble and RCW header
aa55aa55 010e0100
#64 bytes RCW data
0c580000 00000000 22121200 00000000
089c4400 00283000 58000000 61000000
00000000 00000000 00000000 10070000
00000000 00000000 00000000 00000000

38
board/freescale/ls1021aiot/ls1021aiot.c
View file

@ -109,44 +109,6 @@ int dram_init(void)
return 0;
}
#ifdef CONFIG_TSEC_ENET
int board_eth_init(struct bd_info *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
if (is_serdes_configured(SGMII_TSEC1)) {
puts("eTSEC1 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
}
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
if (is_serdes_configured(SGMII_TSEC2)) {
puts("eTSEC2 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
}
num++;
#endif
if (!num) {
printf("No TSECs initialized\n");
return 0;
}
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
}
#endif
int board_early_init_f(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;

1
board/freescale/ls1021aqds/Makefile
View file

@ -6,5 +6,4 @@
obj-y += ls1021aqds.o
obj-y += ddr.o
obj-y += eth.o
obj-$(CONFIG_ARMV7_PSCI) += psci.o

186
board/freescale/ls1021aqds/eth.c
View file

@ -1,186 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* This file handles the board muxing between the RGMII/SGMII PHYs on
* Freescale LS1021AQDS board. The RGMII PHYs are the three on-board 1Gb
* ports. The SGMII PHYs are provided by the standard Freescale four-port
* SGMII riser card.
*
* Muxing is handled via the PIXIS BRDCFG4 register. The EMI1 bits control
* muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII depends
* on which port is used. The value for SGMII depends on which slot the riser
* is inserted in.
*/
#include <common.h>
#include <net.h>
#include <netdev.h>
#include <asm/arch/fsl_serdes.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <malloc.h>
#include "../common/sgmii_riser.h"
#include "../common/qixis.h"
#define EMI1_MASK 0x1f
#define EMI1_RGMII0 1
#define EMI1_RGMII1 2
#define EMI1_RGMII2 3
#define EMI1_SGMII1 0x1c
#define EMI1_SGMII2 0x1d
struct ls1021a_mdio {
struct mii_dev *realbus;
};
static void ls1021a_mux_mdio(int addr)
{
u8 brdcfg4;
brdcfg4 = QIXIS_READ(brdcfg[4]);
brdcfg4 &= EMI1_MASK;
switch (addr) {
case EMI1_RGMII0:
brdcfg4 |= 0;
break;
case EMI1_RGMII1:
brdcfg4 |= 0x20;
break;
case EMI1_RGMII2:
brdcfg4 |= 0x40;
break;
case EMI1_SGMII1:
brdcfg4 |= 0x60;
break;
case EMI1_SGMII2:
brdcfg4 |= 0x80;
break;
default:
brdcfg4 |= 0xa0;
break;
}
QIXIS_WRITE(brdcfg[4], brdcfg4);
}
static int ls1021a_mdio_read(struct mii_dev *bus, int addr, int devad,
int regnum)
{
struct ls1021a_mdio *priv = bus->priv;
ls1021a_mux_mdio(addr);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int ls1021a_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct ls1021a_mdio *priv = bus->priv;
ls1021a_mux_mdio(addr);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int ls1021a_mdio_reset(struct mii_dev *bus)
{
struct ls1021a_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static int ls1021a_mdio_init(char *realbusname, char *fakebusname)
{
struct ls1021a_mdio *lsmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate LS102xA MDIO bus\n");
return -1;
}
lsmdio = malloc(sizeof(*lsmdio));
if (!lsmdio) {
printf("Failed to allocate LS102xA private data\n");
free(bus);
return -1;
}
bus->read = ls1021a_mdio_read;
bus->write = ls1021a_mdio_write;
bus->reset = ls1021a_mdio_reset;
strcpy(bus->name, fakebusname);
lsmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!lsmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(lsmdio);
return -1;
}
bus->priv = lsmdio;
return mdio_register(bus);
}
int board_eth_init(struct bd_info *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[3];
int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
if (is_serdes_configured(SGMII_TSEC1)) {
puts("eTSEC1 is in sgmii mode\n");
tsec_info[num].flags |= TSEC_SGMII;
tsec_info[num].mii_devname = "LS1021A_SGMII_MDIO";
} else {
tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
}
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
if (is_serdes_configured(SGMII_TSEC2)) {
puts("eTSEC2 is in sgmii mode\n");
tsec_info[num].flags |= TSEC_SGMII;
tsec_info[num].mii_devname = "LS1021A_SGMII_MDIO";
} else {
tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
}
num++;
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
tsec_info[num].mii_devname = "LS1021A_RGMII_MDIO";
num++;
#endif
if (!num) {
printf("No TSECs initialized\n");
return 0;
}
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_init(tsec_info, num);
#endif
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
/* Register the virtual MDIO front-ends */
ls1021a_mdio_init(DEFAULT_MII_NAME, "LS1021A_RGMII_MDIO");
ls1021a_mdio_init(DEFAULT_MII_NAME, "LS1021A_SGMII_MDIO");
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
}

10
board/freescale/ls1043aqds/eth.c
View file

@ -30,8 +30,6 @@
#define EMI1_SLOT4 5
#define EMI2 6
static int mdio_mux[NUM_FM_PORTS];
static const char * const mdio_names[] = {
"LS1043AQDS_MDIO_RGMII1",
"LS1043AQDS_MDIO_RGMII2",
@ -43,7 +41,11 @@ static const char * const mdio_names[] = {
};
/* Map SerDes1 4 lanes to default slot, will be initialized dynamically */
#ifdef CONFIG_FMAN_ENET
static int mdio_mux[NUM_FM_PORTS];
static u8 lane_to_slot[] = {1, 2, 3, 4};
#endif
static const char *ls1043aqds_mdio_name_for_muxval(u8 muxval)
{
@ -75,6 +77,7 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval)
return bus;
}
#ifdef CONFIG_FMAN_ENET
struct ls1043aqds_mdio {
u8 muxval;
struct mii_dev *realbus;
@ -296,7 +299,6 @@ void fdt_fixup_board_enet(void *fdt)
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_FMAN_ENET
int i, idx, lane, slot, interface;
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
@ -493,7 +495,7 @@ int board_eth_init(struct bd_info *bis)
}
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */
return pci_eth_init(bis);
}
#endif /* CONFIG_FMAN_ENET */

5
board/freescale/ls1043aqds/ls1043aqds.c
View file

@ -556,10 +556,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
ft_cpu_setup(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
#ifndef CONFIG_DM_ETH
fdt_fixup_fman_ethernet(blob);
#endif
#ifdef CONFIG_FMAN_ENET
fdt_fixup_board_enet(blob);
#endif

10
board/freescale/ls1046aqds/eth.c
View file

@ -27,8 +27,6 @@
#define EMI1_SLOT2 3
#define EMI1_SLOT4 4
static int mdio_mux[NUM_FM_PORTS];
static const char * const mdio_names[] = {
"LS1046AQDS_MDIO_RGMII1",
"LS1046AQDS_MDIO_RGMII2",
@ -39,7 +37,11 @@ static const char * const mdio_names[] = {
};
/* Map SerDes 1 & 2 lanes to default slot. */
#ifdef CONFIG_FMAN_ENET
static int mdio_mux[NUM_FM_PORTS];
static u8 lane_to_slot[] = {1, 1, 1, 1, 0, 4, 0 , 0};
#endif
static const char *ls1046aqds_mdio_name_for_muxval(u8 muxval)
{
@ -71,6 +73,7 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval)
return bus;
}
#ifdef CONFIG_FMAN_ENET
struct ls1046aqds_mdio {
u8 muxval;
struct mii_dev *realbus;
@ -263,7 +266,6 @@ void fdt_fixup_board_enet(void *fdt)
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_FMAN_ENET
int i, idx, lane, slot, interface;
struct memac_mdio_info dtsec_mdio_info;
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@ -423,7 +425,7 @@ int board_eth_init(struct bd_info *bis)
}
cpu_eth_init(bis);
#endif /* CONFIG_FMAN_ENET */
return pci_eth_init(bis);
}
#endif /* CONFIG_FMAN_ENET */

5
board/freescale/ls1046aqds/ls1046aqds.c
View file

@ -439,10 +439,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
fdt_fixup_memory_banks(blob, base, size, 2);
ft_cpu_setup(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
#ifndef CONFIG_DM_ETH
fdt_fixup_fman_ethernet(blob);
#endif
#ifdef CONFIG_FMAN_ENET
fdt_fixup_board_enet(blob);
#endif

4
board/freescale/mpc8548cds/mpc8548cds.c
View file

@ -169,7 +169,8 @@ void lbc_sdram_init(void)
#endif /* enable SDRAM init */
}
void configure_rgmii(void)
#ifndef CONFIG_DM_ETH
static void configure_rgmii(void)
{
unsigned short temp;
@ -248,3 +249,4 @@ int board_eth_init(struct bd_info *bis)
return pci_eth_init(bis);
}
#endif

3
board/freescale/mx28evk/MAINTAINERS
View file

@ -5,6 +5,3 @@ F: board/freescale/mx28evk/
F: arch/arm/dts/imx28-evk.dts
F: include/configs/mx28evk.h
F: configs/mx28evk_defconfig
F: configs/mx28evk_auart_console_defconfig
F: configs/mx28evk_nand_defconfig
F: configs/mx28evk_spi_defconfig

0
board/freescale/corenet_ds/pbi.cfg → board/freescale/p2041rdb/pbi.cfg
View file

0
board/freescale/corenet_ds/rcw_p2041rdb.cfg → board/freescale/p2041rdb/rcw_p2041rdb.cfg
View file

58
board/isee/igep00x0/igep00x0.c
View file

@ -88,62 +88,6 @@ int onenand_board_init(struct mtd_info *mtd)
return 1;
}
#if defined(CONFIG_CMD_NET)
static void reset_net_chip(int gpio)
{
if (!gpio_request(gpio, "eth nrst")) {
gpio_direction_output(gpio, 1);
udelay(1);
gpio_set_value(gpio, 0);
udelay(40);
gpio_set_value(gpio, 1);
mdelay(10);
}
}
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
* Ethernet hardware.
*/
static void setup_net_chip(void)
{
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
static const u32 gpmc_lan_config[] = {
NET_LAN9221_GPMC_CONFIG1,
NET_LAN9221_GPMC_CONFIG2,
NET_LAN9221_GPMC_CONFIG3,
NET_LAN9221_GPMC_CONFIG4,
NET_LAN9221_GPMC_CONFIG5,
NET_LAN9221_GPMC_CONFIG6,
};
enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
reset_net_chip(64);
}
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_SMC911X
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
#else
return 0;
#endif
}
#else
static inline void setup_net_chip(void) {}
#endif
#ifdef CONFIG_OF_BOARD_SETUP
static int ft_enable_by_compatible(void *blob, char *compat, int enable)
{
@ -234,8 +178,6 @@ int misc_init_r(void)
OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
OMAP34XX_CTRL_WKUP_CTRL);
setup_net_chip();
omap_die_id_display();
set_led();

12
board/kmc/kzm9g/Kconfig
View file

@ -1,12 +0,0 @@
if TARGET_KZM9G
config SYS_BOARD
default "kzm9g"
config SYS_VENDOR
default "kmc"
config SYS_CONFIG_NAME
default "kzm9g"
endif

7
board/kmc/kzm9g/MAINTAINERS
View file

@ -1,7 +0,0 @@
KZM9G BOARD
M: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
M: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
S: Maintained
F: board/kmc/kzm9g/
F: include/configs/kzm9g.h
F: configs/kzm9g_defconfig

6
board/kmc/kzm9g/Makefile
View file

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
# (C) Copyright 2012 Renesas Solutions Corp.
obj-y := kzm9g.o

373
board/kmc/kzm9g/kzm9g.c
View file

@ -1,373 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* (C) Copyright 2012 Renesas Solutions Corp.
*/
#include <common.h>
#include <cpu_func.h>
#include <init.h>
#include <net.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <netdev.h>
#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
#define CS0BCR_D (0x06C00400)
#define CS4BCR_D (0x16c90400)
#define CS0WCR_D (0x55062C42)
#define CS4WCR_D (0x1e071dc3)
#define CMNCR_BROMMD0 (1 << 21)
#define CMNCR_BROMMD1 (1 << 22)
#define CMNCR_BROMMD (CMNCR_BROMMD0|CMNCR_BROMMD1)
#define VCLKCR1_D (0x27)
#define SMSTPCR1_CMT0 (1 << 24)
#define SMSTPCR1_I2C0 (1 << 16)
#define SMSTPCR3_USB (1 << 22)
#define SMSTPCR3_I2C1 (1 << 23)
#define PORT32CR (0xE6051020)
#define PORT33CR (0xE6051021)
#define PORT34CR (0xE6051022)
#define PORT35CR (0xE6051023)
static int cmp_loop(u32 *addr, u32 data, u32 cmp)
{
int err = -1;
int timeout = 100;
u32 value;
while (timeout > 0) {
value = readl(addr);
if ((value & data) == cmp) {
err = 0;
break;
}
timeout--;
}
return err;
}
/* SBSC Init function */
static void sbsc_init(struct sh73a0_sbsc *sbsc)
{
writel(readl(&sbsc->dllcnt0)|0x2, &sbsc->dllcnt0);
writel(0x5, &sbsc->sdgencnt);
cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
writel(0xacc90159, &sbsc->sdcr0);
writel(0x00010059, &sbsc->sdcr1);
writel(0x50874114, &sbsc->sdwcrc0);
writel(0x33199b37, &sbsc->sdwcrc1);
writel(0x008f2313, &sbsc->sdwcrc2);
writel(0x31020707, &sbsc->sdwcr00);
writel(0x0017040a, &sbsc->sdwcr01);
writel(0x31020707, &sbsc->sdwcr10);
writel(0x0017040a, &sbsc->sdwcr11);
writel(0x055557ff, &sbsc->sddrvcr0); /* Enlarge drivability of LPDQS0-3, LPCLK */
writel(0x30000000, &sbsc->sdwcr2);
writel(readl(&sbsc->sdpcr) | 0x80, &sbsc->sdpcr);
cmp_loop(&sbsc->sdpcr, 0x80, 0x80);
writel(0x00002710, &sbsc->sdgencnt);
cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
writel(0x0000003f, &sbsc->sdmracr0);
writel(0x0, SDMRA1A);
writel(0x000001f4, &sbsc->sdgencnt);
cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
writel(0x0000ff0a, &sbsc->sdmracr0);
if (sbsc == (struct sh73a0_sbsc *)SBSC1_BASE)
writel(0x0, SDMRA3A);
else
writel(0x0, SDMRA3B);
writel(0x00000032, &sbsc->sdgencnt);
cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
if (sbsc == (struct sh73a0_sbsc *)SBSC1_BASE) {
writel(0x00002201, &sbsc->sdmracr0);
writel(0x0, SDMRA1A);
writel(0x00000402, &sbsc->sdmracr0);
writel(0x0, SDMRA1A);
writel(0x00000203, &sbsc->sdmracr0); /* MR3 register DS=2 */
writel(0x0, SDMRA1A);
writel(0x0, SDMRA2A);
} else {
writel(0x00002201, &sbsc->sdmracr0);
writel(0x0, SDMRA1B);
writel(0x00000402, &sbsc->sdmracr0);
writel(0x0, SDMRA1B);
writel(0x00000203, &sbsc->sdmracr0); /* MR3 register DS=2 */
writel(0x0, SDMRA1B);
writel(0x0, SDMRA2B);
}
writel(0x88800004, &sbsc->sdmrtmpcr);
writel(0x00000004, &sbsc->sdmrtmpmsk);
writel(0xa55a0032, &sbsc->rtcor);
writel(0xa55a000c, &sbsc->rtcorh);
writel(0xa55a2048, &sbsc->rtcsr);
writel(readl(&sbsc->sdcr0)|0x800, &sbsc->sdcr0);
writel(readl(&sbsc->sdcr1)|0x400, &sbsc->sdcr1);
writel(0xfff20000, &sbsc->zqccr);
/* SCBS2 only */
if (sbsc == (struct sh73a0_sbsc *)SBSC2_BASE) {
writel(readl(&sbsc->sdpdcr0)|0x00030000, &sbsc->sdpdcr0);
writel(0xa5390000, &sbsc->dphycnt1);
writel(0x00001200, &sbsc->dphycnt0);
writel(0x07ce0000, &sbsc->dphycnt1);
writel(0x00001247, &sbsc->dphycnt0);
cmp_loop(&sbsc->dphycnt2, 0xffffffff, 0x07ce0000);
writel(readl(&sbsc->sdpdcr0) & 0xfffcffff, &sbsc->sdpdcr0);
}
}
void s_init(void)
{
struct sh73a0_rwdt *rwdt = (struct sh73a0_rwdt *)RWDT_BASE;
struct sh73a0_sbsc_cpg *cpg = (struct sh73a0_sbsc_cpg *)CPG_BASE;
struct sh73a0_sbsc_cpg_srcr *cpg_srcr =
(struct sh73a0_sbsc_cpg_srcr *)CPG_SRCR_BASE;
struct sh73a0_sbsc *sbsc1 = (struct sh73a0_sbsc *)SBSC1_BASE;
struct sh73a0_sbsc *sbsc2 = (struct sh73a0_sbsc *)SBSC2_BASE;
struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
struct sh73a0_hpb_bscr *hpb_bscr =
(struct sh73a0_hpb_bscr *)HPBSCR_BASE;
/* Watchdog init */
writew(0xA507, &rwdt->rwtcsra0);
/* Secure control register Init */
#define LIFEC_SEC_SRC_BIT (1 << 15)
writel(readl(LIFEC_SEC_SRC) & ~LIFEC_SEC_SRC_BIT, LIFEC_SEC_SRC);
clrbits_le32(&cpg->smstpcr3, (1 << 15));
clrbits_le32(&cpg_srcr->srcr3, (1 << 15));
clrbits_le32(&cpg->smstpcr2, (1 << 18));
clrbits_le32(&cpg_srcr->srcr2, (1 << 18));
writel(0x0, &cpg->pllecr);
cmp_loop(&cpg->pllecr, 0x00000F00, 0x0);
cmp_loop(&cpg->frqcrb, 0x80000000, 0x0);
writel(0x2D000000, &cpg->pll0cr);
writel(0x17100000, &cpg->pll1cr);
writel(0x96235880, &cpg->frqcrb);
cmp_loop(&cpg->frqcrb, 0x80000000, 0x0);
writel(0xB, &cpg->flckcr);
clrbits_le32(&cpg->smstpcr0, (1 << 1));
clrbits_le32(&cpg_srcr->srcr0, (1 << 1));
writel(0x0514, &hpb_bscr->smgpiotime);
writel(0x0514, &hpb_bscr->smcmt2time);
writel(0x0514, &hpb_bscr->smcpgtime);
writel(0x0514, &hpb_bscr->smsysctime);
writel(0x00092000, &cpg->dvfscr4);
writel(0x000000DC, &cpg->dvfscr5);
writel(0x0, &cpg->pllecr);
cmp_loop(&cpg->pllecr, 0x00000F00, 0x0);
/* FRQCR Init */
writel(0x0012453C, &cpg->frqcra);
writel(0x80431350, &cpg->frqcrb); /* ETM TRCLK 78MHz */
cmp_loop(&cpg->frqcrb, 0x80000000, 0x0);
writel(0x00000B0B, &cpg->frqcrd);
cmp_loop(&cpg->frqcrd, 0x80000000, 0x0);
/* Clock Init */
writel(0x00000003, PCLKCR);
writel(0x0000012F, &cpg->vclkcr1);
writel(0x00000119, &cpg->vclkcr2);
writel(0x00000119, &cpg->vclkcr3);
writel(0x00000002, &cpg->zbckcr);
writel(0x00000005, &cpg->flckcr);
writel(0x00000080, &cpg->sd0ckcr);
writel(0x00000080, &cpg->sd1ckcr);
writel(0x00000080, &cpg->sd2ckcr);
writel(0x0000003F, &cpg->fsiackcr);
writel(0x0000003F, &cpg->fsibckcr);
writel(0x00000080, &cpg->subckcr);
writel(0x0000000B, &cpg->spuackcr);
writel(0x0000000B, &cpg->spuvckcr);
writel(0x0000013F, &cpg->msuckcr);
writel(0x00000080, &cpg->hsickcr);
writel(0x0000003F, &cpg->mfck1cr);
writel(0x0000003F, &cpg->mfck2cr);
writel(0x00000107, &cpg->dsitckcr);
writel(0x00000313, &cpg->dsi0pckcr);
writel(0x0000130D, &cpg->dsi1pckcr);
writel(0x2A800E0E, &cpg->dsi0phycr);
writel(0x1E000000, &cpg->pll0cr);
writel(0x2D000000, &cpg->pll0cr);
writel(0x17100000, &cpg->pll1cr);
writel(0x27000080, &cpg->pll2cr);
writel(0x1D000000, &cpg->pll3cr);
writel(0x00080000, &cpg->pll0stpcr);
writel(0x000120C0, &cpg->pll1stpcr);
writel(0x00012000, &cpg->pll2stpcr);
writel(0x00000030, &cpg->pll3stpcr);
writel(0x0000000B, &cpg->pllecr);
cmp_loop(&cpg->pllecr, 0x00000B00, 0x00000B00);
writel(0x000120F0, &cpg->dvfscr3);
writel(0x00000020, &cpg->mpmode);
writel(0x0000028A, &cpg->vrefcr);
writel(0xE4628087, &cpg->rmstpcr0);
writel(0xFFFFFFFF, &cpg->rmstpcr1);
writel(0x53FFFFFF, &cpg->rmstpcr2);
writel(0xFFFFFFFF, &cpg->rmstpcr3);
writel(0x00800D3D, &cpg->rmstpcr4);
writel(0xFFFFF3FF, &cpg->rmstpcr5);
writel(0x00000000, &cpg->smstpcr2);
writel(0x00040000, &cpg_srcr->srcr2);
clrbits_le32(&cpg->pllecr, (1 << 3));
cmp_loop(&cpg->pllecr, 0x00000800, 0x0);
writel(0x00000001, &hpb->hpbctrl6);
cmp_loop(&hpb->hpbctrl6, 0x1, 0x1);
writel(0x00001414, &cpg->frqcrd);
cmp_loop(&cpg->frqcrd, 0x80000000, 0x0);
writel(0x1d000000, &cpg->pll3cr);
setbits_le32(&cpg->pllecr, (1 << 3));
cmp_loop(&cpg->pllecr, 0x800, 0x800);
/* SBSC1 Init*/
sbsc_init(sbsc1);
/* SBSC2 Init*/
sbsc_init(sbsc2);
writel(0x00000b0b, &cpg->frqcrd);
cmp_loop(&cpg->frqcrd, 0x80000000, 0x0);
writel(0xfffffffc, &cpg->cpgxxcs4);
}
int board_early_init_f(void)
{
struct sh73a0_sbsc_cpg *cpg = (struct sh73a0_sbsc_cpg *)CPG_BASE;
struct sh73a0_bsc *bsc = (struct sh73a0_bsc *)BSC_BASE;
struct sh73a0_sbsc_cpg_srcr *cpg_srcr =
(struct sh73a0_sbsc_cpg_srcr *)CPG_SRCR_BASE;
writel(CS0BCR_D, &bsc->cs0bcr);
writel(CS4BCR_D, &bsc->cs4bcr);
writel(CS0WCR_D, &bsc->cs0wcr);
writel(CS4WCR_D, &bsc->cs4wcr);
clrsetbits_le32(&bsc->cmncr, ~CMNCR_BROMMD, CMNCR_BROMMD);
clrbits_le32(&cpg->smstpcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
clrbits_le32(&cpg_srcr->srcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
clrbits_le32(&cpg->smstpcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1));
clrbits_le32(&cpg_srcr->srcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1));
writel(VCLKCR1_D, &cpg->vclkcr1);
/* Setup SCIF4 / workaround */
writeb(0x12, PORT32CR);
writeb(0x22, PORT33CR);
writeb(0x12, PORT34CR);
writeb(0x22, PORT35CR);
return 0;
}
void adjust_core_voltage(void)
{
u8 data;
data = 0x35;
i2c_set_bus_num(0);
i2c_write(0x40, 3, 1, &data, 1);
}
int board_init(void)
{
adjust_core_voltage();
sh73a0_pinmux_init();
/* SCIFA 4 */
gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
/* Ethernet/SMSC */
gpio_request(GPIO_PORT224, NULL);
gpio_direction_input(GPIO_PORT224);
/* SMSC/USB */
gpio_request(GPIO_FN_CS4_, NULL);
/* MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
/* SDHI */
gpio_request(GPIO_FN_SDHIWP0, NULL);
gpio_request(GPIO_FN_SDHICD0, NULL);
gpio_request(GPIO_FN_SDHICMD0, NULL);
gpio_request(GPIO_FN_SDHICLK0, NULL);
gpio_request(GPIO_FN_SDHID0_3, NULL);
gpio_request(GPIO_FN_SDHID0_2, NULL);
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
gpio_request(GPIO_PORT15, NULL);
gpio_direction_output(GPIO_PORT15, 1);
/* I2C */
gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
return 0;
}
int dram_init(void)
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
return 0;
}
int board_eth_init(struct bd_info *bis)
{
int ret = 0;
#ifdef CONFIG_SMC911X
ret = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return ret;
}
void reset_cpu(void)
{
/* Soft Power On Reset */
writel((1 << 31), RESCNT2);
}

3
board/l+g/vinco/vinco.c
View file

@ -204,9 +204,6 @@ int board_eth_init(struct bd_info *bis)
#ifdef CONFIG_USB_GADGET_ATMEL_USBA
usba_udc_probe(&pdata);
#ifdef CONFIG_USB_ETH_RNDIS
usb_eth_initialize(bis);
#endif
#endif
return rc;

9
board/samsung/smdkc100/smdkc100.c
View file

@ -69,12 +69,3 @@ int checkboard(void)
return 0;
}
#endif
int board_eth_init(struct bd_info *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
return rc;
}

13
board/warp7/warp7.c
View file

@ -66,19 +66,6 @@ int power_init_board(void)
}
#endif
int board_eth_init(struct bd_info *bis)
{
int ret = 0;
#ifdef CONFIG_USB_ETHER
ret = usb_eth_initialize(bis);
if (ret < 0)
printf("Error %d registering USB ether.\n", ret);
#endif
return ret;
}
int board_init(void)
{
/* address of boot parameters */

4
configs/P2041RDB_NAND_defconfig
View file

@ -21,8 +21,8 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg"
CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"

4
configs/P2041RDB_SDCARD_defconfig
View file

@ -21,8 +21,8 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg"
CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"

4
configs/P2041RDB_SPIFLASH_defconfig
View file

@ -23,8 +23,8 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SPIFLASH=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg"
CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"

113
configs/P3041DS_NAND_defconfig
View file

@ -1,113 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_DEFAULT_DEVICE_TREE="p3041ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_PCIE4=y
CONFIG_SYS_FSL_NUM_CC_PLLS=2
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xFFA00C21
CONFIG_SYS_OR0_PRELIM=0xFFFC0796
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR2_PRELIM_BOOL=y
CONFIG_SYS_BR2_PRELIM=0xE8001001
CONFIG_SYS_OR2_PRELIM=0xF8000F85
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_FSL_ELBC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x100000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

108
configs/P3041DS_SDCARD_defconfig
View file

@ -1,108 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xCF400
CONFIG_DEFAULT_DEVICE_TREE="p3041ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_PCIE4=y
CONFIG_SYS_FSL_NUM_CC_PLLS=2
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xD2000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

110
configs/P3041DS_SPIFLASH_defconfig
View file

@ -1,110 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="p3041ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_PCIE4=y
CONFIG_SYS_FSL_NUM_CC_PLLS=2
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SPIFLASH=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x110000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

105
configs/P3041DS_defconfig
View file

@ -1,105 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p3041ds"
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_PCIE4=y
CONFIG_SYS_FSL_NUM_CC_PLLS=2
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

105
configs/P4080DS_SDCARD_defconfig
View file

@ -1,105 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xCF400
CONFIG_DEFAULT_DEVICE_TREE="p4080ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P4080DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=4
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p4080ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_LBA48=y
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xD2000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

107
configs/P4080DS_SPIFLASH_defconfig
View file

@ -1,107 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="p4080ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P4080DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=4
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SPIFLASH=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p4080ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_LBA48=y
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x110000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

102
configs/P4080DS_defconfig
View file

@ -1,102 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p4080ds"
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_MPC85xx=y
CONFIG_TARGET_P4080DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=4
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_LBA48=y
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

113
configs/P5040DS_NAND_defconfig
View file

@ -1,113 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
CONFIG_DEFAULT_DEVICE_TREE="p5040ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=3
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xFFA00C21
CONFIG_SYS_OR0_PRELIM=0xFFFC0796
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR2_PRELIM_BOOL=y
CONFIG_SYS_BR2_PRELIM=0xE8001001
CONFIG_SYS_OR2_PRELIM=0xF8000F85
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_FSL_ELBC=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x100000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

107
configs/P5040DS_SDCARD_defconfig
View file

@ -1,107 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xCF400
CONFIG_DEFAULT_DEVICE_TREE="p5040ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=3
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xD2000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

109
configs/P5040DS_SPIFLASH_defconfig
View file

@ -1,109 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x100000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="p5040ds"
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=3
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_RAMBOOT_PBL=y
CONFIG_SPIFLASH=y
CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg"
CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg"
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x110000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

104
configs/P5040DS_defconfig
View file

@ -1,104 +0,0 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="p5040ds"
CONFIG_ENV_ADDR=0xEFF20000
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_ENABLE_36BIT_PHYS=y
CONFIG_SYS_BOOK3E_HV=y
CONFIG_SYS_CACHE_STASHING=y
CONFIG_PCIE1=y
CONFIG_PCIE2=y
CONFIG_PCIE3=y
CONFIG_SYS_FSL_NUM_CC_PLLS=3
CONFIG_MP=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_ID_EEPROM=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PBSIZE=276
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="FM1@DTSEC1"
CONFIG_DM=y
CONFIG_FSL_SATA_V2=y
CONFIG_SYS_SATA_MAX_DEVICE=2
CONFIG_FSL_CAAM=y
CONFIG_SYS_SPD_BUS_NUM=1
CONFIG_DDR_ECC=y
CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xE8001001
CONFIG_SYS_OR0_PRELIM=0xF8000F85
CONFIG_SYS_BR1_PRELIM_BOOL=y
CONFIG_SYS_BR1_PRELIM=0xE0001001
CONFIG_SYS_OR1_PRELIM=0xF8000FF7
CONFIG_SYS_BR3_PRELIM_BOOL=y
CONFIG_SYS_BR3_PRELIM=0xFFDF0801
CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7
CONFIG_DM_I2C=y
CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x57
CONFIG_FSL_ESDHC=y
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_SYS_MAX_FLASH_SECT=1024
CONFIG_SYS_MAX_FLASH_BANKS=2
CONFIG_DM_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=10000000
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_PHY_TERANETICS=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000
CONFIG_MII=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_FSL=y
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_STORAGE=y
CONFIG_ADDR_MAP=y
CONFIG_SYS_NUM_ADDR_MAP=64

2
configs/am335x_sl50_defconfig
View file

@ -32,8 +32,6 @@ CONFIG_SPL_MTD_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NET=y
CONFIG_SPL_NET_VCI_STRING="AM335x U-Boot SPL"
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700

54
configs/armadillo-800eva_defconfig
View file

@ -1,54 +0,0 @@
CONFIG_ARM=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SYS_THUMB_BUILD is not set
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_TEXT_BASE=0xE80C0000
CONFIG_SYS_MALLOC_LEN=0x100000
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_ARCH_RMOBILE_BOARD_STRING="Armadillo-800EVA Board"
CONFIG_R8A7740=y
CONFIG_TARGET_ARMADILLO_800EVA=y
CONFIG_SYS_CLK_FREQ=50000000
CONFIG_SYS_LOAD_ADDR=0x44000000
CONFIG_ENV_ADDR=0x40000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xe8083000
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_BOOTDELAY=3
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=256
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_SAVEENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_LOADB is not set
CONFIG_CMD_SDRAM=y
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_MMC is not set
CONFIG_BITBANGMII=y
CONFIG_BITBANGMII_MULTI=y
CONFIG_PHY_SMSC=y
CONFIG_SH_ETHER=y
CONFIG_SCIF_CONSOLE=y
CONFIG_OF_LIBFDT=y

83
configs/cm_t335_defconfig
View file

@ -1,83 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x300000
CONFIG_AM33XX=y
CONFIG_TARGET_CM_T335=y
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
CONFIG_TIMESTAMP=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SYS_SPL_MALLOC=y
CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
CONFIG_SPL_FS_EXT4=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
CONFIG_SYS_PROMPT="CM-T335 # "
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=1051
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_EEPROM_LAYOUT=y
CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3"
CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_DNS2=y
CONFIG_SYS_DISABLE_AUTOLOAD=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:2m(spl),1m(u-boot),1m(u-boot-env),1m(dtb),4m(splash),6m(kernel),-(rootfs)"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_CMD_PCA953X=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=64
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=0
CONFIG_SYS_I2C_EEPROM_ADDR=0x50
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000
CONFIG_PHY_ATHEROS=y
CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_OF_LIBFDT=y

72
configs/edminiv2_defconfig
View file

@ -1,72 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_ARCH_ORION5X=y
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_SYS_MALLOC_LEN=0x40000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL_LDSCRIPT="arch/arm/mach-orion5x/u-boot-spl.lds"
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_SPL_TEXT_BASE=0xffff0000
CONFIG_TARGET_EDMINIV2=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" EDMiniV2"
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_ENV_ADDR=0xFFF84000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf40
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_RESET_PHY_R=y
CONFIG_SPL_MAX_SIZE=0xfff0
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x20000
CONFIG_SPL_BSS_MAX_SIZE=0x1ffff
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x20000
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x40000
CONFIG_SYS_SPL_MALLOC_SIZE=0x1ffff
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="EDMiniV2> "
CONFIG_SYS_PBSIZE=1051
CONFIG_CMD_IMLS=y
CONFIG_CMD_IDE=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_EXT2=y
CONFIG_ISO_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_IDE_MAXBUS=1
CONFIG_SYS_IDE_MAXDEVICE=1
CONFIG_SYS_ATA_BASE_ADDR=0xf1080000
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0x100
CONFIG_SYS_ATA_REG_OFFSET=0x100
CONFIG_SYS_ATA_ALT_OFFSET=0x100
CONFIG_SYS_ATA_IDE0_OFFSET=0x4000
CONFIG_LBA48=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_SYS_I2C_SLAVE=0x0
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_MAX_FLASH_SECT=11
CONFIG_MVGBE=y
CONFIG_MII=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y

5
configs/igep00x0_defconfig
View file

@ -67,7 +67,7 @@ CONFIG_ENV_UBI_VOLUME="config"
CONFIG_ENV_UBI_VOLUME_REDUND="config_r"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
# CONFIG_NET is not set
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_MMC_OMAP_HS=y
@ -81,9 +81,6 @@ CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x2C000000
CONFIG_SMC911X_32_BIT=y
CONFIG_CONS_INDEX=3
CONFIG_SPI=y
CONFIG_DM_SPI=y

47
configs/kzm9g_defconfig
View file

@ -1,47 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SYS_THUMB_BUILD is not set
CONFIG_ARCH_RMOBILE=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_LEN=0x60000
CONFIG_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ARCH_RMOBILE_BOARD_STRING="KMC KZM-A9-GT"
CONFIG_TARGET_KZM9G=y
CONFIG_SYS_LOAD_ADDR=0x43000000
CONFIG_ENV_ADDR=0x40000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/null console=ttySC4,115200"
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="KZM-A9-GT# "
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=256
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_NFS_TIMEOUT=10000
CONFIG_CMD_PING=y
CONFIG_CMD_FAT=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_SH=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SMC911X=y
CONFIG_SMC911X_BASE=0x10000000
CONFIG_SMC911X_32_BIT=y
CONFIG_SCIF_CONSOLE=y
# CONFIG_FAT_WRITE is not set
CONFIG_OF_LIBFDT=y

1
configs/ls1043aqds_defconfig
View file

@ -95,7 +95,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x60900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_lpuart_defconfig
View file

@ -95,7 +95,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x60900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_nand_defconfig
View file

@ -125,7 +125,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_nor_ddr3_defconfig
View file

@ -96,7 +96,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x60900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_qspi_defconfig
View file

@ -85,7 +85,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x40900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_sdcard_ifc_defconfig
View file

@ -122,7 +122,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_sdcard_qspi_defconfig
View file

@ -110,7 +110,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
View file

@ -94,7 +94,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1043aqds_tfa_defconfig
View file

@ -103,7 +103,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_SECURE_BOOT_defconfig
View file

@ -93,7 +93,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x60900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_defconfig
View file

@ -96,7 +96,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x60900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_lpuart_defconfig
View file

@ -96,7 +96,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x60900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_nand_defconfig
View file

@ -124,7 +124,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_qspi_defconfig
View file

@ -86,7 +86,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x40900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_sdcard_ifc_defconfig
View file

@ -124,7 +124,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_sdcard_qspi_defconfig
View file

@ -112,7 +112,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
View file

@ -94,7 +94,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

1
configs/ls1046aqds_tfa_defconfig
View file

@ -104,7 +104,6 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_VITESSE=y
CONFIG_E1000=y
CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCI=y

Some files were not shown because too many files have changed in this diff Show more