dm: treewide: Complete migration to new driver model schema

Update various build and test components to use the new schema.

Signed-off-by: Simon Glass <sjg@chromium.org>

drivers/core/ofnode.c

@@ -1312,22 +1312,22 @@ bool ofnode_pre_reloc(ofnode node)
 {
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_TPL_BUILD)
 	/* for SPL and TPL the remaining nodes after the fdtgrep 1st pass
-	 * had property dm-pre-reloc or u-boot,dm-spl/tpl.
+	 * had property bootph-all or bootph-pre-sram/bootph-pre-ram.
 	 * They are removed in final dtb (fdtgrep 2nd pass)
 	 */
 	return true;
 #else
-	if (ofnode_read_bool(node, "u-boot,dm-pre-reloc"))
+	if (ofnode_read_bool(node, "bootph-all"))
 		return true;
-	if (ofnode_read_bool(node, "u-boot,dm-pre-proper"))
+	if (ofnode_read_bool(node, "bootph-some-ram"))
 		return true;
 
 	/*
 	 * In regular builds individual spl and tpl handling both
 	 * count as handled pre-relocation for later second init.
 	 */
-	if (ofnode_read_bool(node, "u-boot,dm-spl") ||
+	if (ofnode_read_bool(node, "bootph-pre-ram") ||
-	    ofnode_read_bool(node, "u-boot,dm-tpl"))
+	    ofnode_read_bool(node, "bootph-pre-sram"))
 		return true;
 
 	if (IS_ENABLED(CONFIG_OF_TAG_MIGRATE)) {

drivers/video/video-uclass.c

@@ -529,8 +529,8 @@ static int video_post_bind(struct udevice *dev)
 	addr = uc_priv->video_ptr;
 	size = alloc_fb(dev, &addr);
 	if (addr < gd->video_bottom) {
-		/* Device tree node may need the 'u-boot,dm-pre-reloc' or
+		/* Device tree node may need the 'bootph-all' or
-		 * 'u-boot,dm-pre-proper' tag
+		 * 'bootph-some-ram' tag
 		 */
 		printf("Video device '%s' cannot allocate frame buffer memory -ensure the device is set up before relocation\n",
 		       dev->name);

dts/Kconfig

@@ -362,7 +362,7 @@ config OF_SPL_REMOVE_PROPS
 	help
 	  Since SPL normally runs in a reduced memory space, the device tree
 	  is cut down to only what is needed to load and start U-Boot. Only
-	  nodes marked with the property "u-boot,dm-pre-reloc" will be
+	  nodes marked with the property "bootph-all" will be
 	  included. In addition, some properties are not used by U-Boot and
 	  can be discarded. This option defines the list of properties to
 	  discard.

include/dm/device.h

@@ -1070,7 +1070,7 @@ static inline bool device_is_on_pci_bus(const struct udevice *dev)
  * sub-nodes and binds drivers for each node where a driver can be found.
  *
  * If this is called prior to relocation, only pre-relocation devices will be
- * bound (those marked with u-boot,dm-pre-reloc in the device tree, or where
+ * bound (those marked with bootph-all in the device tree, or where
  * the driver has the DM_FLAG_PRE_RELOC flag set). Otherwise, all devices will
  * be bound.
  *

include/dm/ofnode.h

@@ -1188,12 +1188,12 @@ int ofnode_read_simple_size_cells(ofnode node);
  * determine if a node was bound in one of SPL/TPL stages.
  *
  * There are 4 settings currently in use
- * - u-boot,dm-pre-proper: U-Boot proper pre-relocation only
+ * - bootph-some-ram: U-Boot proper pre-relocation only
- * - u-boot,dm-pre-reloc: legacy and indicates any of TPL or SPL
+ * - bootph-all: all phases
  * Existing platforms only use it to indicate nodes needed in
- * SPL. Should probably be replaced by u-boot,dm-spl for new platforms.
+ * SPL. Should probably be replaced by bootph-pre-ram for new platforms.
- * - u-boot,dm-spl: SPL and U-Boot pre-relocation
+ * - bootph-pre-ram: SPL and U-Boot pre-relocation
- * - u-boot,dm-tpl: TPL and U-Boot pre-relocation
+ * - bootph-pre-sram: TPL and U-Boot pre-relocation
  *
  * @node: node to check
  * Return: true if node is needed in SPL/TL, false otherwise

test/dm/test-fdt.c

@@ -215,7 +215,7 @@ static int dm_test_fdt_pre_reloc(struct unit_test_state *uts)
 
 	/*
 	 * These are 2 pre-reloc devices:
-	 * one with "u-boot,dm-pre-reloc" property (a-test node), and the other
+	 * one with "bootph-all" property (a-test node), and the other
 	 * one whose driver marked with DM_FLAG_PRE_RELOC flag (h-test node).
 	 */
 	ut_asserteq(2, list_count_items(&uc->dev_head));

test/py/tests/test_ofplatdata.py

@@ -13,10 +13,10 @@ def test_spl_devicetree(u_boot_console):
     fdtgrep = cons.config.build_dir + '/tools/fdtgrep'
     output = util.run_and_log(cons, [fdtgrep, '-l', dtb])
 
-    assert "u-boot,dm-pre-reloc" not in output
+    assert "bootph-all" not in output
-    assert "u-boot,dm-pre-proper" not in output
+    assert "bootph-some-ram" not in output
-    assert "u-boot,dm-spl" not in output
+    assert "bootph-pre-ram" not in output
-    assert "u-boot,dm-tpl" not in output
+    assert "bootph-pre-sram" not in output
 
     assert "spl-test5" not in output
     assert "spl-test6" not in output

tools/binman/binman.rst

@@ -1122,8 +1122,7 @@ It is sometimes inconvenient to add a 'binman' node to the .dts file for each
 board. This can be done by using #include to bring in a common file. Another
 approach supported by the U-Boot build system is to automatically include
 a common header. You can then put the binman node (and anything else that is
-specific to U-Boot, such as u-boot,dm-pre-reloc properies) in that header
+specific to U-Boot, such as bootph-all properies) in that header file.
-file.
 
 Binman will search for the following files in arch/<arch>/dts::
 

tools/dtoc/test_fdt.py

@@ -132,10 +132,10 @@ class TestFdt(unittest.TestCase):
         """Tests obtaining a list of properties"""
         node = self.dtb.GetNode('/spl-test')
         props = self.dtb.GetProps(node)
-        self.assertEqual(['boolval', 'bytearray', 'byteval', 'compatible',
+        self.assertEqual(['boolval', 'bootph-all', 'bytearray', 'byteval',
-                          'int64val', 'intarray', 'intval', 'longbytearray',
+                          'compatible', 'int64val', 'intarray', 'intval',
-                          'maybe-empty-int', 'notstring', 'stringarray',
+                          'longbytearray', 'maybe-empty-int', 'notstring',
-                          'stringval', 'u-boot,dm-pre-reloc'],
+                          'stringarray', 'stringval', ],
                          sorted(props.keys()))
 
     def test_check_error(self):