Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possible

Browse source 
According to Section 11.15.4.9.1 Indirect Read Controller of K2G SoC
TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit
data interface reads until the last word of an indirect transfer
So, make sure that QSPI indirect reads are 32 bit sized except for the
final read. If the rxbuf is unaligned then use bounce buffer, so that
readsl() can be used instead of readsb() to avoid non 32-bit accesses.

[1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
This commit is contained in:
Vignesh R 2016-12-21 10:42:33 +05:30 committed by Jagan Teki
parent 57897c13de
commit b63b46313e
1 changed files with 16 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
drivers/spi/cadence_qspi_apb.c
View file

@ -634,6 +634,8 @@ int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
{
unsigned int remaining = n_rx;
unsigned int bytes_to_read = 0;
struct bounce_buffer bb;
u8 *bb_rxbuf;
int ret;
writel(n_rx, plat->regbase + CQSPI_REG_INDIRECTRDBYTES);
@ -642,6 +644,11 @@ int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
writel(CQSPI_REG_INDIRECTRD_START,
plat->regbase + CQSPI_REG_INDIRECTRD);
ret = bounce_buffer_start(&bb, (void *)rxbuf, n_rx, GEN_BB_WRITE);
if (ret)
return ret;
bb_rxbuf = bb.bounce_buffer;
while (remaining > 0) {
ret = cadence_qspi_wait_for_data(plat);
if (ret < 0) {
@ -655,12 +662,13 @@ int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
bytes_to_read *= CQSPI_FIFO_WIDTH;
bytes_to_read = bytes_to_read > remaining ?
remaining : bytes_to_read;
/* Handle non-4-byte aligned access to avoid data abort. */
if (((uintptr_t)rxbuf % 4) || (bytes_to_read % 4))
readsb(plat->ahbbase, rxbuf, bytes_to_read);
else
readsl(plat->ahbbase, rxbuf, bytes_to_read >> 2);
rxbuf += bytes_to_read;
readsl(plat->ahbbase, bb_rxbuf, bytes_to_read >> 2);
if (bytes_to_read % 4)
readsb(plat->ahbbase,
bb_rxbuf + rounddown(bytes_to_read, 4),
bytes_to_read % 4);
bb_rxbuf += bytes_to_read;
remaining -= bytes_to_read;
bytes_to_read = cadence_qspi_get_rd_sram_level(plat);
}
@ -677,6 +685,7 @@ int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
/* Clear indirect completion status */
writel(CQSPI_REG_INDIRECTRD_DONE,
plat->regbase + CQSPI_REG_INDIRECTRD);
bounce_buffer_stop(&bb);
return 0;
@ -684,6 +693,7 @@ failrd:
/* Cancel the indirect read */
writel(CQSPI_REG_INDIRECTRD_CANCEL,
plat->regbase + CQSPI_REG_INDIRECTRD);
bounce_buffer_stop(&bb);
return ret;
}