Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

OMAP5-uevm: USB: Add xHCI host contoller support

Browse source 
Add the call back into the board file for to enable
the SMPS10 VBUS regulator.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
This commit is contained in:
Dan Murphy 2013-08-26 08:54:53 -05:00 committed by Marek Vasut
parent 2d2358ac15
commit 968055321e
1 changed files with 51 additions and 23 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

74
board/ti/omap5_uevm/evm.c
View file

@ -14,7 +14,7 @@
#include "mux_data.h"
#ifdef CONFIG_USB_EHCI
#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
#include <usb.h>
#include <asm/gpio.h>
#include <asm/arch/clock.h>
@ -72,6 +72,35 @@ int board_eth_init(bd_t *bis)
return 0;
}
#if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP)
static void enable_host_clocks(void)
{
int auxclk;
int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
OPTFCLKEN_HSIC480M_P3_CLK |
OPTFCLKEN_HSIC60M_P2_CLK |
OPTFCLKEN_HSIC480M_P2_CLK |
OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
/* Enable port 2 and 3 clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
/* Enable port 2 and 3 usb host ports tll clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
#ifdef CONFIG_USB_XHCI_OMAP
/* Enable the USB OTG Super speed clocks */
setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
(OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW));
#endif
auxclk = readl((*prcm)->scrm_auxclk1);
/* Request auxilary clock */
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, (*prcm)->scrm_auxclk1);
}
#endif
/**
* @brief misc_init_r - Configure EVM board specific configurations
* such as power configurations, ethernet initialization as phase2 of
@ -84,6 +113,7 @@ int misc_init_r(void)
#ifdef CONFIG_PALMAS_POWER
palmas_init_settings();
#endif
return 0;
}
@ -129,26 +159,9 @@ static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
};
static void enable_host_clocks(void)
{
int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK |
OPTFCLKEN_HSIC480M_P3_CLK |
OPTFCLKEN_HSIC60M_P2_CLK |
OPTFCLKEN_HSIC480M_P2_CLK |
OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK);
/* Enable port 2 and 3 clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val);
/* Enable port 2 and 3 usb host ports tll clocks*/
setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl,
(OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE));
}
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
int ret;
int auxclk;
int reg;
uint8_t device_mac[6];
@ -171,11 +184,6 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
eth_setenv_enetaddr("usbethaddr", device_mac);
}
auxclk = readl((*prcm)->scrm_auxclk1);
/* Request auxilary clock */
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, (*prcm)->scrm_auxclk1);
ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
if (ret < 0) {
puts("Failed to initialize ehci\n");
@ -203,3 +211,23 @@ void usb_hub_reset_devices(int port)
}
}
#endif
#ifdef CONFIG_USB_XHCI_OMAP
/**
* @brief board_usb_init - Configure EVM board specific configurations
* for the LDO's and clocks for the USB blocks.
*
* @return 0
*/
int board_usb_init(void)
{
int ret;
#ifdef CONFIG_PALMAS_USB_SS_PWR
ret = palmas_enable_ss_ldo();
#endif
enable_host_clocks();
return 0;
}
#endif