omap3evm: Prepare to split configuration
This patch marks the beginning of steps that would lead to clean and easy split of the configuration file. Common portion can then be re-used by other configurations. Signed-off-by: Sanjeev Premi <premi@ti.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
This commit is contained in:
Sanjeev Premi
Albert ARIBAUD
parent
ee8e225400
commit
741de26618
1 changed files with 132 additions and 62 deletions
|
|
@ -1,6 +1,8 @@
|
|||
/*
|
||||
* (C) Copyright 2006-2008
|
||||
* Texas Instruments.
|
||||
* Configuration settings for the TI OMAP3 EVM board.
|
||||
*
|
||||
* Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Author :
|
||||
* Manikandan Pillai <mani.pillai@ti.com>
|
||||
* Derived from Beagle Board and 3430 SDP code by
|
||||
|
|
@ -9,8 +11,6 @@
|
|||
*
|
||||
* Manikandan Pillai <mani.pillai@ti.com>
|
||||
*
|
||||
* Configuration settings for the TI OMAP3 EVM board.
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
*
|
||||
|
|
@ -30,11 +30,130 @@
|
|||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
#ifndef __OMAP3EVM_CONFIG_H
|
||||
#define __OMAP3EVM_CONFIG_H
|
||||
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
/* =============================================================================
|
||||
* This section holds the common definitions that correspond to the
|
||||
* current default configuration - omap3_evm_config
|
||||
* =============================================================================
|
||||
*/
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* Supported U-boot commands
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/* Default commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
||||
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#define CONFIG_CMD_NAND /* NAND support */
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_PING
|
||||
|
||||
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
||||
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
||||
#undef CONFIG_CMD_IMI /* iminfo */
|
||||
#undef CONFIG_CMD_IMLS /* List all found images */
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* Supported U-boot features
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Display CPU and Board information */
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
/* Allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
/* Add auto-completion support */
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
|
||||
/* ----------------------------------------------------------------------------
|
||||
* Supported hardware
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
/* MMC */
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_OMAP_HSMMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/* USB
|
||||
*
|
||||
* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
|
||||
* Enable CONFIG_MUSB_UDD for Device functionalities.
|
||||
*/
|
||||
#define CONFIG_USB_OMAP3
|
||||
#define CONFIG_MUSB_HCD
|
||||
/* #define CONFIG_MUSB_UDC */
|
||||
|
||||
/* -----------------------------------------------------------------------------
|
||||
* Default environment
|
||||
* -----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_BOOTDELAY 10
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x82000000\0" \
|
||||
"usbtty=cdc_acm\0" \
|
||||
"mmcdev=0\0" \
|
||||
"memsize=128M\0" \
|
||||
"console=ttyO0,115200n8\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"mem=${memsize}\0 " \
|
||||
"root=/dev/mmcblk0p2 rw " \
|
||||
"rootfstype=ext3 rootwait\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"mem=${memsize}\0 " \
|
||||
"root=/dev/mtdblock4 rw " \
|
||||
"rootfstype=jffs2\0" \
|
||||
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source ${loadaddr}\0" \
|
||||
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"onenand read ${loadaddr} 280000 400000; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"if mmc rescan ${mmcdev}; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run nandboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run nandboot; fi"
|
||||
|
||||
/* =============================================================================
|
||||
* This section holds the common definitions that can be used by
|
||||
* all OMAP3EVM based configurations.
|
||||
* =============================================================================
|
||||
*/
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* High level configuration options
|
||||
*/
|
||||
#define CONFIG_OMAP /* This is TI OMAP core */
|
||||
#define CONFIG_OMAP34XX /* belonging to 34XX family */
|
||||
|
|
@ -46,12 +165,6 @@
|
|||
#define CONFIG_OMAP3_MICRON_DDR /* with MICRON DDR part */
|
||||
#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */
|
||||
|
||||
/*
|
||||
* Get cpu and chip specific definitions
|
||||
*/
|
||||
#include <asm/arch/cpu.h>
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
||||
|
||||
/*
|
||||
|
|
@ -77,10 +190,10 @@
|
|||
|
||||
/*
|
||||
* Stack sizes
|
||||
*
|
||||
* The stack sizes are set up in start.S using the settings below
|
||||
* These values are used in start.S
|
||||
*/
|
||||
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
|
||||
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
|
||||
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
|
||||
|
|
@ -193,22 +306,8 @@
|
|||
#define CONFIG_JFFS2_PART_SIZE 0xf980000
|
||||
|
||||
/*
|
||||
* MMC
|
||||
* USB
|
||||
*/
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_OMAP_HSMMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
|
||||
/* USB
|
||||
*
|
||||
* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
|
||||
* Enable CONFIG_MUSB_UDD for Device functionalities.
|
||||
*/
|
||||
#define CONFIG_USB_OMAP3
|
||||
#define CONFIG_MUSB_HCD
|
||||
/* #define CONFIG_MUSB_UDC */
|
||||
|
||||
#ifdef CONFIG_USB_OMAP3
|
||||
|
||||
#ifdef CONFIG_MUSB_HCD
|
||||
|
|
@ -244,16 +343,10 @@
|
|||
* U-boot features
|
||||
* ----------------------------------------------------------------------------
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT "OMAP3_EVM # "
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max args for a command */
|
||||
|
||||
/* Display CPU and Board information */
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
|
|
@ -261,12 +354,6 @@
|
|||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_REVISION_TAG
|
||||
|
||||
/* Allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
/* Add auto-completion support */
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
|
||||
/* Size of Console IO buffer */
|
||||
#define CONFIG_SYS_CBSIZE 512
|
||||
|
||||
|
|
@ -277,28 +364,11 @@
|
|||
/* Size of bootarg buffer */
|
||||
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
|
||||
|
||||
/* Default commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
||||
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#define CONFIG_CMD_NAND /* NAND support */
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_PING
|
||||
|
||||
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
||||
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
||||
#undef CONFIG_CMD_IMI /* iminfo */
|
||||
#undef CONFIG_CMD_IMLS /* List all found images */
|
||||
#define CONFIG_BOOTFILE uImage
|
||||
|
||||
/*
|
||||
* Additional definitions that depend on chosen commands
|
||||
* NAND / OneNAND
|
||||
*/
|
||||
/* NAND */
|
||||
#if defined(CONFIG_CMD_NAND)
|
||||
#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
|
||||
|
||||
|
|
@ -390,4 +460,4 @@
|
|||
"fi; " \
|
||||
"else run nandboot; fi"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
#endif /* __OMAP3EVM_CONFIG_H */
|
||||
|
|
|
|||
Loading…
Reference in a new issue