video: Add support for the ANX9804 parallel lcd to dp bridge chip
Add support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into a DP interface for driving eDP TFT displays. It uses I2C for configuration. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Anatolij Gustschin <agust@denx.de>
This commit is contained in:
Hans de Goede
parent
fb685d3310
commit
66525bb732
4 changed files with 222 additions and 0 deletions
|
|
@ -151,6 +151,14 @@ config FRAMEBUFFER_VESA_MODE
|
|||
default 0x11B if FRAMEBUFFER_VESA_MODE_11B
|
||||
default 0x117 if FRAMEBUFFER_VESA_MODE_USER
|
||||
|
||||
config VIDEO_LCD_ANX9804
|
||||
bool "ANX9804 bridge chip"
|
||||
default n
|
||||
---help---
|
||||
Support for the ANX9804 bridge chip, which can take pixel data coming
|
||||
from a parallel LCD interface and translate it on the fy into a DP
|
||||
interface for driving eDP TFT displays. It uses I2C for configuration.
|
||||
|
||||
config VIDEO_LCD_SSD2828
|
||||
bool "SSD2828 bridge chip"
|
||||
default n
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ obj-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
|
|||
obj-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
|
||||
obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
|
||||
obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o
|
||||
obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o
|
||||
obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o
|
||||
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
|
||||
obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
|
||||
|
|
|
|||
188
drivers/video/anx9804.c
Executable file
188
drivers/video/anx9804.c
Executable file
|
|
@ -0,0 +1,188 @@
|
|||
/*
|
||||
* (C) 2015 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* Support for the ANX9804 bridge chip, which can take pixel data coming
|
||||
* from a parallel LCD interface and translate it on the flight into a DP
|
||||
* interface for driving eDP TFT displays.
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <i2c.h>
|
||||
#include "anx9804.h"
|
||||
|
||||
#define BIT(x) (1 << (x))
|
||||
|
||||
/* Registers at i2c address 0x38 */
|
||||
|
||||
#define ANX9804_HDCP_CONTROL_0_REG 0x01
|
||||
|
||||
#define ANX9804_SYS_CTRL2_REG 0x81
|
||||
#define ANX9804_SYS_CTRL2_CHA_STA 0x04
|
||||
|
||||
#define ANX9804_SYS_CTRL3_REG 0x82
|
||||
#define ANX9804_SYS_CTRL3_VALID_CTRL BIT(0)
|
||||
#define ANX9804_SYS_CTRL3_F_VALID BIT(1)
|
||||
#define ANX9804_SYS_CTRL3_HPD_CTRL BIT(4)
|
||||
#define ANX9804_SYS_CTRL3_F_HPD BIT(5)
|
||||
|
||||
#define ANX9804_LINK_BW_SET_REG 0xa0
|
||||
#define ANX9804_LANE_COUNT_SET_REG 0xa1
|
||||
#define ANX9804_TRAINING_PTN_SET_REG 0xa2
|
||||
#define ANX9804_TRAINING_LANE0_SET_REG 0xa3
|
||||
#define ANX9804_TRAINING_LANE1_SET_REG 0xa4
|
||||
#define ANX9804_TRAINING_LANE2_SET_REG 0xa5
|
||||
#define ANX9804_TRAINING_LANE3_SET_REG 0xa6
|
||||
|
||||
#define ANX9804_LINK_TRAINING_CTRL_REG 0xa8
|
||||
#define ANX9804_LINK_TRAINING_CTRL_EN BIT(0)
|
||||
|
||||
#define ANX9804_LINK_DEBUG_REG 0xb8
|
||||
#define ANX9804_PLL_CTRL_REG 0xc7
|
||||
#define ANX9804_ANALOG_POWER_DOWN_REG 0xc8
|
||||
|
||||
/* Registers at i2c address 0x39 */
|
||||
|
||||
#define ANX9804_DEV_IDH_REG 0x03
|
||||
|
||||
#define ANX9804_POWERD_CTRL_REG 0x05
|
||||
#define ANX9804_POWERD_AUDIO BIT(4)
|
||||
|
||||
#define ANX9804_RST_CTRL_REG 0x06
|
||||
|
||||
#define ANX9804_RST_CTRL2_REG 0x07
|
||||
#define ANX9804_RST_CTRL2_AUX BIT(2)
|
||||
#define ANX9804_RST_CTRL2_AC_MODE BIT(6)
|
||||
|
||||
#define ANX9804_VID_CTRL1_REG 0x08
|
||||
#define ANX9804_VID_CTRL1_VID_EN BIT(7)
|
||||
#define ANX9804_VID_CTRL1_EDGE BIT(0)
|
||||
|
||||
#define ANX9804_VID_CTRL2_REG 0x09
|
||||
#define ANX9804_ANALOG_DEBUG_REG1 0xdc
|
||||
#define ANX9804_ANALOG_DEBUG_REG3 0xde
|
||||
#define ANX9804_PLL_FILTER_CTRL1 0xdf
|
||||
#define ANX9804_PLL_FILTER_CTRL3 0xe1
|
||||
#define ANX9804_PLL_FILTER_CTRL 0xe2
|
||||
#define ANX9804_PLL_CTRL3 0xe6
|
||||
|
||||
/**
|
||||
* anx9804_init() - Init anx9804 parallel lcd to edp bridge chip
|
||||
*
|
||||
* This function will init an anx9804 parallel lcd to dp bridge chip
|
||||
* using the passed in parameters.
|
||||
*
|
||||
* @i2c_bus: Number of the i2c bus to which the anx9804 is connected.
|
||||
* @lanes: Number of displayport lanes to use
|
||||
* @data_rate: Register value for the bandwidth reg 0x06: 1.62G, 0x0a: 2.7G
|
||||
* @bpp: Bits per pixel, must be 18 or 24
|
||||
*/
|
||||
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp)
|
||||
{
|
||||
unsigned int orig_i2c_bus = i2c_get_bus_num();
|
||||
u8 c, colordepth;
|
||||
int i;
|
||||
|
||||
i2c_set_bus_num(i2c_bus);
|
||||
|
||||
if (bpp == 18)
|
||||
colordepth = 0x00; /* 6 bit */
|
||||
else
|
||||
colordepth = 0x10; /* 8 bit */
|
||||
|
||||
/* Reset */
|
||||
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 1);
|
||||
mdelay(100);
|
||||
i2c_reg_write(0x39, ANX9804_RST_CTRL_REG, 0);
|
||||
|
||||
/* Write 0 to the powerdown reg (powerup everything) */
|
||||
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, 0);
|
||||
|
||||
c = i2c_reg_read(0x39, ANX9804_DEV_IDH_REG);
|
||||
if (c != 0x98) {
|
||||
printf("Error anx9804 chipid mismatch\n");
|
||||
i2c_set_bus_num(orig_i2c_bus);
|
||||
return;
|
||||
}
|
||||
|
||||
for (i = 0; i < 100; i++) {
|
||||
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
|
||||
i2c_reg_write(0x38, ANX9804_SYS_CTRL2_REG, c);
|
||||
c = i2c_reg_read(0x38, ANX9804_SYS_CTRL2_REG);
|
||||
if ((c & ANX9804_SYS_CTRL2_CHA_STA) == 0)
|
||||
break;
|
||||
|
||||
mdelay(5);
|
||||
}
|
||||
if (i == 100)
|
||||
printf("Error anx9804 clock is not stable\n");
|
||||
|
||||
i2c_reg_write(0x39, ANX9804_VID_CTRL2_REG, colordepth);
|
||||
|
||||
/* Set a bunch of analog related register values */
|
||||
i2c_reg_write(0x38, ANX9804_PLL_CTRL_REG, 0x07);
|
||||
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL3, 0x19);
|
||||
i2c_reg_write(0x39, ANX9804_PLL_CTRL3, 0xd9);
|
||||
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG, ANX9804_RST_CTRL2_AC_MODE);
|
||||
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG1, 0xf0);
|
||||
i2c_reg_write(0x39, ANX9804_ANALOG_DEBUG_REG3, 0x99);
|
||||
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL1, 0x7b);
|
||||
i2c_reg_write(0x38, ANX9804_LINK_DEBUG_REG, 0x30);
|
||||
i2c_reg_write(0x39, ANX9804_PLL_FILTER_CTRL, 0x06);
|
||||
|
||||
/* Force HPD */
|
||||
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
|
||||
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL);
|
||||
|
||||
/* Power up and configure lanes */
|
||||
i2c_reg_write(0x38, ANX9804_ANALOG_POWER_DOWN_REG, 0x00);
|
||||
i2c_reg_write(0x38, ANX9804_TRAINING_LANE0_SET_REG, 0x00);
|
||||
i2c_reg_write(0x38, ANX9804_TRAINING_LANE1_SET_REG, 0x00);
|
||||
i2c_reg_write(0x38, ANX9804_TRAINING_LANE2_SET_REG, 0x00);
|
||||
i2c_reg_write(0x38, ANX9804_TRAINING_LANE3_SET_REG, 0x00);
|
||||
|
||||
/* Reset AUX CH */
|
||||
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
|
||||
ANX9804_RST_CTRL2_AC_MODE | ANX9804_RST_CTRL2_AUX);
|
||||
i2c_reg_write(0x39, ANX9804_RST_CTRL2_REG,
|
||||
ANX9804_RST_CTRL2_AC_MODE);
|
||||
|
||||
/* Powerdown audio and some other unused bits */
|
||||
i2c_reg_write(0x39, ANX9804_POWERD_CTRL_REG, ANX9804_POWERD_AUDIO);
|
||||
i2c_reg_write(0x38, ANX9804_HDCP_CONTROL_0_REG, 0x00);
|
||||
i2c_reg_write(0x38, 0xa7, 0x00);
|
||||
|
||||
/* Set data-rate / lanes */
|
||||
i2c_reg_write(0x38, ANX9804_LINK_BW_SET_REG, data_rate);
|
||||
i2c_reg_write(0x38, ANX9804_LANE_COUNT_SET_REG, lanes);
|
||||
|
||||
/* Link training */
|
||||
i2c_reg_write(0x38, ANX9804_LINK_TRAINING_CTRL_REG,
|
||||
ANX9804_LINK_TRAINING_CTRL_EN);
|
||||
mdelay(5);
|
||||
for (i = 0; i < 100; i++) {
|
||||
c = i2c_reg_read(0x38, ANX9804_LINK_TRAINING_CTRL_REG);
|
||||
if ((c & 0x01) == 0)
|
||||
break;
|
||||
|
||||
mdelay(5);
|
||||
}
|
||||
if(i == 100) {
|
||||
printf("Error anx9804 link training timeout\n");
|
||||
i2c_set_bus_num(orig_i2c_bus);
|
||||
return;
|
||||
}
|
||||
|
||||
/* Enable */
|
||||
i2c_reg_write(0x39, ANX9804_VID_CTRL1_REG,
|
||||
ANX9804_VID_CTRL1_VID_EN | ANX9804_VID_CTRL1_EDGE);
|
||||
/* Force stream valid */
|
||||
i2c_reg_write(0x38, ANX9804_SYS_CTRL3_REG,
|
||||
ANX9804_SYS_CTRL3_F_HPD | ANX9804_SYS_CTRL3_HPD_CTRL |
|
||||
ANX9804_SYS_CTRL3_F_VALID | ANX9804_SYS_CTRL3_VALID_CTRL);
|
||||
|
||||
i2c_set_bus_num(orig_i2c_bus);
|
||||
}
|
||||
25
drivers/video/anx9804.h
Normal file
25
drivers/video/anx9804.h
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
/*
|
||||
* (C) 2015 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
/*
|
||||
* Support for the ANX9804 bridge chip, which can take pixel data coming
|
||||
* from a parallel LCD interface and translate it on the flight into a DP
|
||||
* interface for driving eDP TFT displays.
|
||||
*/
|
||||
|
||||
#ifndef _ANX9804_H
|
||||
#define _ANX9804_H
|
||||
|
||||
#define ANX9804_DATA_RATE_1620M 0x06
|
||||
#define ANX9804_DATA_RATE_2700M 0x0a
|
||||
|
||||
#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
|
||||
void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate, int bpp);
|
||||
#else
|
||||
static inline void anx9804_init(unsigned int i2c_bus, u8 lanes, u8 data_rate,
|
||||
int bpp) {}
|
||||
#endif
|
||||
#endif
|
||||
Loading…
Reference in a new issue