Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

OMAP3: Add common clock, memory and low level code

Browse source 
Add common clock, memory and low level code

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
This commit is contained in:
Dirk Behme 2008-12-14 09:47:14 +01:00 committed by Jean-Christophe PLAGNIOL-VILLARD
parent 0b02b18400
commit 5ed3e8659e
4 changed files with 1098 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

381
cpu/arm_cortexa8/omap3/clock.c Normal file
View file

@ -0,0 +1,381 @@
/*
* (C) Copyright 2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Manikandan Pillai <mani.pillai@ti.com>
*
* Derived from Beagle Board and OMAP3 SDP code by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clocks.h>
#include <asm/arch/clocks_omap3.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <environment.h>
#include <command.h>
/******************************************************************************
* get_sys_clk_speed() - determine reference oscillator speed
* based on known 32kHz clock and gptimer.
*****************************************************************************/
u32 get_osc_clk_speed(void)
{
u32 start, cstart, cend, cdiff, val;
prcm_t *prcm_base = (prcm_t *)PRCM_BASE;
prm_t *prm_base = (prm_t *)PRM_BASE;
gptimer_t *gpt1_base = (gptimer_t *)OMAP34XX_GPT1;
s32ktimer_t *s32k_base = (s32ktimer_t *)SYNC_32KTIMER_BASE;
val = readl(&prm_base->clksrc_ctrl);
/* If SYS_CLK is being divided by 2, remove for now */
val = (val & (~SYSCLKDIV_2)) | SYSCLKDIV_1;
writel(val, &prm_base->clksrc_ctrl);
/* enable timer2 */
val = readl(&prcm_base->clksel_wkup) | CLKSEL_GPT1;
/* select sys_clk for GPT1 */
writel(val, &prcm_base->clksel_wkup);
/* Enable I and F Clocks for GPT1 */
val = readl(&prcm_base->iclken_wkup) | EN_GPT1 | EN_32KSYNC;
writel(val, &prcm_base->iclken_wkup);
val = readl(&prcm_base->fclken_wkup) | EN_GPT1;
writel(val, &prcm_base->fclken_wkup);
writel(0, &gpt1_base->tldr); /* start counting at 0 */
writel(GPT_EN, &gpt1_base->tclr); /* enable clock */
/* enable 32kHz source, determine sys_clk via gauging */
/* start time in 20 cycles */
start = 20 + readl(&s32k_base->s32k_cr);
/* dead loop till start time */
while (readl(&s32k_base->s32k_cr) < start);
/* get start sys_clk count */
cstart = readl(&gpt1_base->tcrr);
/* wait for 40 cycles */
while (readl(&s32k_base->s32k_cr) < (start + 20)) ;
cend = readl(&gpt1_base->tcrr); /* get end sys_clk count */
cdiff = cend - cstart; /* get elapsed ticks */
/* based on number of ticks assign speed */
if (cdiff > 19000)
return S38_4M;
else if (cdiff > 15200)
return S26M;
else if (cdiff > 13000)
return S24M;
else if (cdiff > 9000)
return S19_2M;
else if (cdiff > 7600)
return S13M;
else
return S12M;
}
/******************************************************************************
* get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
* input oscillator clock frequency.
*****************************************************************************/
void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
{
switch(osc_clk) {
case S38_4M:
*sys_clkin_sel = 4;
break;
case S26M:
*sys_clkin_sel = 3;
break;
case S19_2M:
*sys_clkin_sel = 2;
break;
case S13M:
*sys_clkin_sel = 1;
break;
case S12M:
default:
*sys_clkin_sel = 0;
}
}
/******************************************************************************
* prcm_init() - inits clocks for PRCM as defined in clocks.h
* called from SRAM, or Flash (using temp SRAM stack).
*****************************************************************************/
void prcm_init(void)
{
void (*f_lock_pll) (u32, u32, u32, u32);
int xip_safe, p0, p1, p2, p3;
u32 osc_clk = 0, sys_clkin_sel;
u32 clk_index, sil_index;
prm_t *prm_base = (prm_t *)PRM_BASE;
prcm_t *prcm_base = (prcm_t *)PRCM_BASE;
dpll_param *dpll_param_p;
f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start +
SRAM_VECT_CODE);
xip_safe = is_running_in_sram();
/*
* Gauge the input clock speed and find out the sys_clkin_sel
* value corresponding to the input clock.
*/
osc_clk = get_osc_clk_speed();
get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
/* set input crystal speed */
sr32(&prm_base->clksel, 0, 3, sys_clkin_sel);
/* If the input clock is greater than 19.2M always divide/2 */
if (sys_clkin_sel > 2) {
/* input clock divider */
sr32(&prm_base->clksrc_ctrl, 6, 2, 2);
clk_index = sys_clkin_sel / 2;
} else {
/* input clock divider */
sr32(&prm_base->clksrc_ctrl, 6, 2, 1);
clk_index = sys_clkin_sel;
}
/*
* The DPLL tables are defined according to sysclk value and
* silicon revision. The clk_index value will be used to get
* the values for that input sysclk from the DPLL param table
* and sil_index will get the values for that SysClk for the
* appropriate silicon rev.
*/
sil_index = get_cpu_rev() - 1;
/* Unlock MPU DPLL (slows things down, and needed later) */
sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOW_POWER_BYPASS);
wait_on_value(ST_MPU_CLK, 0, &prcm_base->idlest_pll_mpu, LDELAY);
/* Getting the base address of Core DPLL param table */
dpll_param_p = (dpll_param *) get_core_dpll_param();
/* Moving it to the right sysclk and ES rev base */
dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
if (xip_safe) {
/*
* CORE DPLL
* sr32(CM_CLKSEL2_EMU) set override to work when asleep
*/
sr32(&prcm_base->clken_pll, 0, 3, PLL_FAST_RELOCK_BYPASS);
wait_on_value(ST_CORE_CLK, 0, &prcm_base->idlest_ckgen,
LDELAY);
/*
* For OMAP3 ES1.0 Errata 1.50, default value directly doesn't
* work. write another value and then default value.
*/
/* m3x2 */
sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2 + 1);
/* m3x2 */
sr32(&prcm_base->clksel1_emu, 16, 5, CORE_M3X2);
/* Set M2 */
sr32(&prcm_base->clksel1_pll, 27, 2, dpll_param_p->m2);
/* Set M */
sr32(&prcm_base->clksel1_pll, 16, 11, dpll_param_p->m);
/* Set N */
sr32(&prcm_base->clksel1_pll, 8, 7, dpll_param_p->n);
/* 96M Src */
sr32(&prcm_base->clksel1_pll, 6, 1, 0);
/* ssi */
sr32(&prcm_base->clksel_core, 8, 4, CORE_SSI_DIV);
/* fsusb */
sr32(&prcm_base->clksel_core, 4, 2, CORE_FUSB_DIV);
/* l4 */
sr32(&prcm_base->clksel_core, 2, 2, CORE_L4_DIV);
/* l3 */
sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
/* gfx */
sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
/* reset mgr */
sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
/* FREQSEL */
sr32(&prcm_base->clken_pll, 4, 4, dpll_param_p->fsel);
/* lock mode */
sr32(&prcm_base->clken_pll, 0, 3, PLL_LOCK);
wait_on_value(ST_CORE_CLK, 1, &prcm_base->idlest_ckgen,
LDELAY);
} else if (is_running_in_flash()) {
/*
* if running from flash, jump to small relocated code
* area in SRAM.
*/
p0 = readl(&prcm_base->clken_pll);
sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS);
sr32(&p0, 4, 4, dpll_param_p->fsel); /* FREQSEL */
p1 = readl(&prcm_base->clksel1_pll);
sr32(&p1, 27, 2, dpll_param_p->m2); /* Set M2 */
sr32(&p1, 16, 11, dpll_param_p->m); /* Set M */
sr32(&p1, 8, 7, dpll_param_p->n); /* Set N */
sr32(&p1, 6, 1, 0); /* set source for 96M */
p2 = readl(&prcm_base->clksel_core);
sr32(&p2, 8, 4, CORE_SSI_DIV); /* ssi */
sr32(&p2, 4, 2, CORE_FUSB_DIV); /* fsusb */
sr32(&p2, 2, 2, CORE_L4_DIV); /* l4 */
sr32(&p2, 0, 2, CORE_L3_DIV); /* l3 */
p3 = (u32)&prcm_base->idlest_ckgen;
(*f_lock_pll) (p0, p1, p2, p3);
}
/* PER DPLL */
sr32(&prcm_base->clken_pll, 16, 3, PLL_STOP);
wait_on_value(ST_PERIPH_CLK, 0, &prcm_base->idlest_ckgen, LDELAY);
/* Getting the base address to PER DPLL param table */
/* Set N */
dpll_param_p = (dpll_param *) get_per_dpll_param();
/* Moving it to the right sysclk base */
dpll_param_p = dpll_param_p + clk_index;
/*
* Errata 1.50 Workaround for OMAP3 ES1.0 only
* If using default divisors, write default divisor + 1
* and then the actual divisor value
*/
sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2 + 1); /* set M6 */
sr32(&prcm_base->clksel1_emu, 24, 5, PER_M6X2); /* set M6 */
sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2 + 1); /* set M5 */
sr32(&prcm_base->clksel_cam, 0, 5, PER_M5X2); /* set M5 */
sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2 + 1); /* set M4 */
sr32(&prcm_base->clksel_dss, 0, 5, PER_M4X2); /* set M4 */
sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2 + 1); /* set M3 */
sr32(&prcm_base->clksel_dss, 8, 5, PER_M3X2); /* set M3 */
sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2 + 1); /* set M2 */
sr32(&prcm_base->clksel3_pll, 0, 5, dpll_param_p->m2); /* set M2 */
/* Workaround end */
sr32(&prcm_base->clksel2_pll, 8, 11, dpll_param_p->m); /* set m */
sr32(&prcm_base->clksel2_pll, 0, 7, dpll_param_p->n); /* set n */
sr32(&prcm_base->clken_pll, 20, 4, dpll_param_p->fsel); /* FREQSEL */
sr32(&prcm_base->clken_pll, 16, 3, PLL_LOCK); /* lock mode */
wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY);
/* Getting the base address to MPU DPLL param table */
dpll_param_p = (dpll_param *) get_mpu_dpll_param();
/* Moving it to the right sysclk and ES rev base */
dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
/* MPU DPLL (unlocked already) */
/* Set M2 */
sr32(&prcm_base->clksel2_pll_mpu, 0, 5, dpll_param_p->m2);
/* Set M */
sr32(&prcm_base->clksel1_pll_mpu, 8, 11, dpll_param_p->m);
/* Set N */
sr32(&prcm_base->clksel1_pll_mpu, 0, 7, dpll_param_p->n);
/* FREQSEL */
sr32(&prcm_base->clken_pll_mpu, 4, 4, dpll_param_p->fsel);
/* lock mode */
sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
wait_on_value(ST_MPU_CLK, 1, &prcm_base->idlest_pll_mpu, LDELAY);
/* Getting the base address to IVA DPLL param table */
dpll_param_p = (dpll_param *) get_iva_dpll_param();
/* Moving it to the right sysclk and ES rev base */
dpll_param_p = dpll_param_p + 3 * clk_index + sil_index;
/* IVA DPLL (set to 12*20=240MHz) */
sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_STOP);
wait_on_value(ST_IVA2_CLK, 0, &prcm_base->idlest_pll_iva2, LDELAY);
/* set M2 */
sr32(&prcm_base->clksel2_pll_iva2, 0, 5, dpll_param_p->m2);
/* set M */
sr32(&prcm_base->clksel1_pll_iva2, 8, 11, dpll_param_p->m);
/* set N */
sr32(&prcm_base->clksel1_pll_iva2, 0, 7, dpll_param_p->n);
/* FREQSEL */
sr32(&prcm_base->clken_pll_iva2, 4, 4, dpll_param_p->fsel);
/* lock mode */
sr32(&prcm_base->clken_pll_iva2, 0, 3, PLL_LOCK);
wait_on_value(ST_IVA2_CLK, 1, &prcm_base->idlest_pll_iva2, LDELAY);
/* Set up GPTimers to sys_clk source only */
sr32(&prcm_base->clksel_per, 0, 8, 0xff);
sr32(&prcm_base->clksel_wkup, 0, 1, 1);
sdelay(5000);
}
/******************************************************************************
* peripheral_enable() - Enable the clks & power for perifs (GPT2, UART1,...)
*****************************************************************************/
void per_clocks_enable(void)
{
prcm_t *prcm_base = (prcm_t *)PRCM_BASE;
/* Enable GP2 timer. */
sr32(&prcm_base->clksel_per, 0, 1, 0x1); /* GPT2 = sys clk */
sr32(&prcm_base->iclken_per, 3, 1, 0x1); /* ICKen GPT2 */
sr32(&prcm_base->fclken_per, 3, 1, 0x1); /* FCKen GPT2 */
#ifdef CONFIG_SYS_NS16550
/* Enable UART1 clocks */
sr32(&prcm_base->fclken1_core, 13, 1, 0x1);
sr32(&prcm_base->iclken1_core, 13, 1, 0x1);
/* UART 3 Clocks */
sr32(&prcm_base->fclken_per, 11, 1, 0x1);
sr32(&prcm_base->iclken_per, 11, 1, 0x1);
#endif
#ifdef CONFIG_DRIVER_OMAP34XX_I2C
/* Turn on all 3 I2C clocks */
sr32(&prcm_base->fclken1_core, 15, 3, 0x7);
sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */
#endif
/* Enable the ICLK for 32K Sync Timer as its used in udelay */
sr32(&prcm_base->iclken_wkup, 2, 1, 0x1);
sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON);
sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON);
sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON);
sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON);
sr32(&prcm_base->fclken_wkup, 0, 32, FCK_WKUP_ON);
sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON);
sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON);
sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON);
sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
sdelay(1000);
}

361
cpu/arm_cortexa8/omap3/lowlevel_init.S Normal file
View file

@ -0,0 +1,361 @@
/*
* Board specific setup info
*
* (C) Copyright 2008
* Texas Instruments, <www.ti.com>
*
* Initial Code by:
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks_omap3.h>
_TEXT_BASE:
.word TEXT_BASE /* sdram load addr from config.mk */
#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
/**************************************************************************
* cpy_clk_code: relocates clock code into SRAM where its safer to execute
* R1 = SRAM destination address.
*************************************************************************/
.global cpy_clk_code
cpy_clk_code:
/* Copy DPLL code into SRAM */
adr r0, go_to_speed /* get addr of clock setting code */
mov r2, #384 /* r2 size to copy (div by 32 bytes) */
mov r1, r1 /* r1 <- dest address (passed in) */
add r2, r2, r0 /* r2 <- source end address */
next2:
ldmia r0!, {r3 - r10} /* copy from source address [r0] */
stmia r1!, {r3 - r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
bne next2
mov pc, lr /* back to caller */
/* ***************************************************************************
* go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
* -executed from SRAM.
* R0 = CM_CLKEN_PLL-bypass value
* R1 = CM_CLKSEL1_PLL-m, n, and divider values
* R2 = CM_CLKSEL_CORE-divider values
* R3 = CM_IDLEST_CKGEN - addr dpll lock wait
*
* Note: If core unlocks/relocks and SDRAM is running fast already it gets
* confused. A reset of the controller gets it back. Taking away its
* L3 when its not in self refresh seems bad for it. Normally, this
* code runs from flash before SDR is init so that should be ok.
****************************************************************************/
.global go_to_speed
go_to_speed:
stmfd sp!, {r4 - r6}
/* move into fast relock bypass */
ldr r4, pll_ctl_add
str r0, [r4]
wait1:
ldr r5, [r3] /* get status */
and r5, r5, #0x1 /* isolate core status */
cmp r5, #0x1 /* still locked? */
beq wait1 /* if lock, loop */
/* set new dpll dividers _after_ in bypass */
ldr r5, pll_div_add1
str r1, [r5] /* set m, n, m2 */
ldr r5, pll_div_add2
str r2, [r5] /* set l3/l4/.. dividers*/
ldr r5, pll_div_add3 /* wkup */
ldr r2, pll_div_val3 /* rsm val */
str r2, [r5]
ldr r5, pll_div_add4 /* gfx */
ldr r2, pll_div_val4
str r2, [r5]
ldr r5, pll_div_add5 /* emu */
ldr r2, pll_div_val5
str r2, [r5]
/* now prepare GPMC (flash) for new dpll speed */
/* flash needs to be stable when we jump back to it */
ldr r5, flash_cfg3_addr
ldr r2, flash_cfg3_val
str r2, [r5]
ldr r5, flash_cfg4_addr
ldr r2, flash_cfg4_val
str r2, [r5]
ldr r5, flash_cfg5_addr
ldr r2, flash_cfg5_val
str r2, [r5]
ldr r5, flash_cfg1_addr
ldr r2, [r5]
orr r2, r2, #0x3 /* up gpmc divider */
str r2, [r5]
/* lock DPLL3 and wait a bit */
orr r0, r0, #0x7 /* set up for lock mode */
str r0, [r4] /* lock */
nop /* ARM slow at this point working at sys_clk */
nop
nop
nop
wait2:
ldr r5, [r3] /* get status */
and r5, r5, #0x1 /* isolate core status */
cmp r5, #0x1 /* still locked? */
bne wait2 /* if lock, loop */
nop
nop
nop
nop
ldmfd sp!, {r4 - r6}
mov pc, lr /* back to caller, locked */
_go_to_speed: .word go_to_speed
/* these constants need to be close for PIC code */
/* The Nor has to be in the Flash Base CS0 for this condition to happen */
flash_cfg1_addr:
.word (GPMC_CONFIG_CS0 + GPMC_CONFIG1)
flash_cfg3_addr:
.word (GPMC_CONFIG_CS0 + GPMC_CONFIG3)
flash_cfg3_val:
.word STNOR_GPMC_CONFIG3
flash_cfg4_addr:
.word (GPMC_CONFIG_CS0 + GPMC_CONFIG4)
flash_cfg4_val:
.word STNOR_GPMC_CONFIG4
flash_cfg5_val:
.word STNOR_GPMC_CONFIG5
flash_cfg5_addr:
.word (GPMC_CONFIG_CS0 + GPMC_CONFIG5)
pll_ctl_add:
.word CM_CLKEN_PLL
pll_div_add1:
.word CM_CLKSEL1_PLL
pll_div_add2:
.word CM_CLKSEL_CORE
pll_div_add3:
.word CM_CLKSEL_WKUP
pll_div_val3:
.word (WKUP_RSM << 1)
pll_div_add4:
.word CM_CLKSEL_GFX
pll_div_val4:
.word (GFX_DIV << 0)
pll_div_add5:
.word CM_CLKSEL1_EMU
pll_div_val5:
.word CLSEL1_EMU_VAL
#endif
.globl lowlevel_init
lowlevel_init:
ldr sp, SRAM_STACK
str ip, [sp] /* stash old link register */
mov ip, lr /* save link reg across call */
bl s_init /* go setup pll, mux, memory */
ldr ip, [sp] /* restore save ip */
mov lr, ip /* restore link reg */
/* back to arch calling code */
mov pc, lr
/* the literal pools origin */
.ltorg
REG_CONTROL_STATUS:
.word CONTROL_STATUS
SRAM_STACK:
.word LOW_LEVEL_SRAM_STACK
/* DPLL(1-4) PARAM TABLES */
/*
* Each of the tables has M, N, FREQSEL, M2 values defined for nominal
* OPP (1.2V). The fields are defined according to dpll_param struct (clock.c).
* The values are defined for all possible sysclk and for ES1 and ES2.
*/
mpu_dpll_param:
/* 12MHz */
/* ES1 */
.word MPU_M_12_ES1, MPU_N_12_ES1, MPU_FSEL_12_ES1, MPU_M2_12_ES1
/* ES2 */
.word MPU_M_12_ES2, MPU_N_12_ES2, MPU_FSEL_12_ES2, MPU_M2_ES2
/* 3410 */
.word MPU_M_12, MPU_N_12, MPU_FSEL_12, MPU_M2_12
/* 13MHz */
/* ES1 */
.word MPU_M_13_ES1, MPU_N_13_ES1, MPU_FSEL_13_ES1, MPU_M2_13_ES1
/* ES2 */
.word MPU_M_13_ES2, MPU_N_13_ES2, MPU_FSEL_13_ES2, MPU_M2_13_ES2
/* 3410 */
.word MPU_M_13, MPU_N_13, MPU_FSEL_13, MPU_M2_13
/* 19.2MHz */
/* ES1 */
.word MPU_M_19P2_ES1, MPU_N_19P2_ES1, MPU_FSEL_19P2_ES1, MPU_M2_19P2_ES1
/* ES2 */
.word MPU_M_19P2_ES2, MPU_N_19P2_ES2, MPU_FSEL_19P2_ES2, MPU_M2_19P2_ES2
/* 3410 */
.word MPU_M_19P2, MPU_N_19P2, MPU_FSEL_19P2, MPU_M2_19P2
/* 26MHz */
/* ES1 */
.word MPU_M_26_ES1, MPU_N_26_ES1, MPU_FSEL_26_ES1, MPU_M2_26_ES1
/* ES2 */
.word MPU_M_26_ES2, MPU_N_26_ES2, MPU_FSEL_26_ES2, MPU_M2_26_ES2
/* 3410 */
.word MPU_M_26, MPU_N_26, MPU_FSEL_26, MPU_M2_26
/* 38.4MHz */
/* ES1 */
.word MPU_M_38P4_ES1, MPU_N_38P4_ES1, MPU_FSEL_38P4_ES1, MPU_M2_38P4_ES1
/* ES2 */
.word MPU_M_38P4_ES2, MPU_N_38P4_ES2, MPU_FSEL_38P4_ES2, MPU_M2_38P4_ES2
/* 3410 */
.word MPU_M_38P4, MPU_N_38P4, MPU_FSEL_38P4, MPU_M2_38P4
.globl get_mpu_dpll_param
get_mpu_dpll_param:
adr r0, mpu_dpll_param
mov pc, lr
iva_dpll_param:
/* 12MHz */
/* ES1 */
.word IVA_M_12_ES1, IVA_N_12_ES1, IVA_FSEL_12_ES1, IVA_M2_12_ES1
/* ES2 */
.word IVA_M_12_ES2, IVA_N_12_ES2, IVA_FSEL_12_ES2, IVA_M2_12_ES2
/* 3410 */
.word IVA_M_12, IVA_N_12, IVA_FSEL_12, IVA_M2_12
/* 13MHz */
/* ES1 */
.word IVA_M_13_ES1, IVA_N_13_ES1, IVA_FSEL_13_ES1, IVA_M2_13_ES1
/* ES2 */
.word IVA_M_13_ES2, IVA_N_13_ES2, IVA_FSEL_13_ES2, IVA_M2_13_ES2
/* 3410 */
.word IVA_M_13, IVA_N_13, IVA_FSEL_13, IVA_M2_13
/* 19.2MHz */
/* ES1 */
.word IVA_M_19P2_ES1, IVA_N_19P2_ES1, IVA_FSEL_19P2_ES1, IVA_M2_19P2_ES1
/* ES2 */
.word IVA_M_19P2_ES2, IVA_N_19P2_ES2, IVA_FSEL_19P2_ES2, IVA_M2_19P2_ES2
/* 3410 */
.word IVA_M_19P2, IVA_N_19P2, IVA_FSEL_19P2, IVA_M2_19P2
/* 26MHz */
/* ES1 */
.word IVA_M_26_ES1, IVA_N_26_ES1, IVA_FSEL_26_ES1, IVA_M2_26_ES1
/* ES2 */
.word IVA_M_26_ES2, IVA_N_26_ES2, IVA_FSEL_26_ES2, IVA_M2_26_ES2
/* 3410 */
.word IVA_M_26, IVA_N_26, IVA_FSEL_26, IVA_M2_26
/* 38.4MHz */
/* ES1 */
.word IVA_M_38P4_ES1, IVA_N_38P4_ES1, IVA_FSEL_38P4_ES1, IVA_M2_38P4_ES1
/* ES2 */
.word IVA_M_38P4_ES2, IVA_N_38P4_ES2, IVA_FSEL_38P4_ES2, IVA_M2_38P4_ES2
/* 3410 */
.word IVA_M_38P4, IVA_N_38P4, IVA_FSEL_38P4, IVA_M2_38P4
.globl get_iva_dpll_param
get_iva_dpll_param:
adr r0, iva_dpll_param
mov pc, lr
/* Core DPLL targets for L3 at 166 & L133 */
core_dpll_param:
/* 12MHz */
/* ES1 */
.word CORE_M_12_ES1, CORE_N_12_ES1, CORE_FSL_12_ES1, CORE_M2_12_ES1
/* ES2 */
.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
/* 3410 */
.word CORE_M_12, CORE_N_12, CORE_FSEL_12, CORE_M2_12
/* 13MHz */
/* ES1 */
.word CORE_M_13_ES1, CORE_N_13_ES1, CORE_FSL_13_ES1, CORE_M2_13_ES1
/* ES2 */
.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
/* 3410 */
.word CORE_M_13, CORE_N_13, CORE_FSEL_13, CORE_M2_13
/* 19.2MHz */
/* ES1 */
.word CORE_M_19P2_ES1, CORE_N_19P2_ES1, CORE_FSL_19P2_ES1, CORE_M2_19P2_ES1
/* ES2 */
.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
/* 3410 */
.word CORE_M_19P2, CORE_N_19P2, CORE_FSEL_19P2, CORE_M2_19P2
/* 26MHz */
/* ES1 */
.word CORE_M_26_ES1, CORE_N_26_ES1, CORE_FSL_26_ES1, CORE_M2_26_ES1
/* ES2 */
.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
/* 3410 */
.word CORE_M_26, CORE_N_26, CORE_FSEL_26, CORE_M2_26
/* 38.4MHz */
/* ES1 */
.word CORE_M_38P4_ES1, CORE_N_38P4_ES1, CORE_FSL_38P4_ES1, CORE_M2_38P4_ES1
/* ES2 */
.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
/* 3410 */
.word CORE_M_38P4, CORE_N_38P4, CORE_FSEL_38P4, CORE_M2_38P4
.globl get_core_dpll_param
get_core_dpll_param:
adr r0, core_dpll_param
mov pc, lr
/* PER DPLL values are same for both ES1 and ES2 */
per_dpll_param:
/* 12MHz */
.word PER_M_12, PER_N_12, PER_FSEL_12, PER_M2_12
/* 13MHz */
.word PER_M_13, PER_N_13, PER_FSEL_13, PER_M2_13
/* 19.2MHz */
.word PER_M_19P2, PER_N_19P2, PER_FSEL_19P2, PER_M2_19P2
/* 26MHz */
.word PER_M_26, PER_N_26, PER_FSEL_26, PER_M2_26
/* 38.4MHz */
.word PER_M_38P4, PER_N_38P4, PER_FSEL_38P4, PER_M2_38P4
.globl get_per_dpll_param
get_per_dpll_param:
adr r0, per_dpll_param
mov pc, lr

284
cpu/arm_cortexa8/omap3/mem.c Normal file
View file

@ -0,0 +1,284 @@
/*
* (C) Copyright 2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Manikandan Pillai <mani.pillai@ti.com>
*
* Initial Code from:
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <command.h>
/*
* Only One NAND allowed on board at a time.
* The GPMC CS Base for the same
*/
unsigned int boot_flash_base;
unsigned int boot_flash_off;
unsigned int boot_flash_sec;
unsigned int boot_flash_type;
volatile unsigned int boot_flash_env_addr;
#if defined(CONFIG_CMD_NAND)
static u32 gpmc_m_nand[GPMC_MAX_REG] = {
M_NAND_GPMC_CONFIG1,
M_NAND_GPMC_CONFIG2,
M_NAND_GPMC_CONFIG3,
M_NAND_GPMC_CONFIG4,
M_NAND_GPMC_CONFIG5,
M_NAND_GPMC_CONFIG6, 0
};
gpmc_csx_t *nand_cs_base;
gpmc_t *gpmc_cfg_base;
#if defined(CONFIG_ENV_IS_IN_NAND)
#define GPMC_CS 0
#else
#define GPMC_CS 1
#endif
#endif
#if defined(CONFIG_CMD_ONENAND)
static u32 gpmc_onenand[GPMC_MAX_REG] = {
ONENAND_GPMC_CONFIG1,
ONENAND_GPMC_CONFIG2,
ONENAND_GPMC_CONFIG3,
ONENAND_GPMC_CONFIG4,
ONENAND_GPMC_CONFIG5,
ONENAND_GPMC_CONFIG6, 0
};
gpmc_csx_t *onenand_cs_base;
#if defined(CONFIG_ENV_IS_IN_ONENAND)
#define GPMC_CS 0
#else
#define GPMC_CS 1
#endif
#endif
static sdrc_t *sdrc_base = (sdrc_t *)OMAP34XX_SDRC_BASE;
/**************************************************************************
* make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
* command line mem=xyz use all memory with out discontinuous support
* compiled in. Could do it at the ATAG, but there really is two banks...
* Called as part of 2nd phase DDR init.
**************************************************************************/
void make_cs1_contiguous(void)
{
u32 size, a_add_low, a_add_high;
size = get_sdr_cs_size(CS0);
size /= SZ_32M; /* find size to offset CS1 */
a_add_high = (size & 3) << 8; /* set up low field */
a_add_low = (size & 0x3C) >> 2; /* set up high field */
writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
}
/********************************************************
* mem_ok() - test used to see if timings are correct
* for a part. Helps in guessing which part
* we are currently using.
*******************************************************/
u32 mem_ok(u32 cs)
{
u32 val1, val2, addr;
u32 pattern = 0x12345678;
addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
writel(0x0, addr + 0x400); /* clear pos A */
writel(pattern, addr); /* pattern to pos B */
writel(0x0, addr + 4); /* remove pattern off the bus */
val1 = readl(addr + 0x400); /* get pos A value */
val2 = readl(addr); /* get val2 */
if ((val1 != 0) || (val2 != pattern)) /* see if pos A val changed */
return 0;
else
return 1;
}
/********************************************************
* sdrc_init() - init the sdrc chip selects CS0 and CS1
* - early init routines, called from flash or
* SRAM.
*******************************************************/
void sdrc_init(void)
{
/* only init up first bank here */
do_sdrc_init(CS0, EARLY_INIT);
}
/*************************************************************************
* do_sdrc_init(): initialize the SDRAM for use.
* -code sets up SDRAM basic SDRC timings for CS0
* -optimal settings can be placed here, or redone after i2c
* inspection of board info
*
* - code called once in C-Stack only context for CS0 and a possible 2nd
* time depending on memory configuration from stack+global context
**************************************************************************/
void do_sdrc_init(u32 cs, u32 early)
{
sdrc_actim_t *sdrc_actim_base;
if(cs)
sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL1_BASE;
else
sdrc_actim_base = (sdrc_actim_t *)SDRC_ACTIM_CTRL0_BASE;
if (early) {
/* reset sdrc controller */
writel(SOFTRESET, &sdrc_base->sysconfig);
wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
12000000);
writel(0, &sdrc_base->sysconfig);
/* setup sdrc to ball mux */
writel(SDP_SDRC_SHARING, &sdrc_base->sharing);
/* Disable Power Down of CKE cuz of 1 CKE on combo part */
writel(SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power);
writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
sdelay(0x20000);
}
writel(RASWIDTH_13BITS | CASWIDTH_10BITS | ADDRMUXLEGACY |
RAMSIZE_128 | BANKALLOCATION | B32NOT16 | B32NOT16 |
DEEPPD | DDR_SDRAM, &sdrc_base->cs[cs].mcfg);
writel(ARCV | ARE_ARCV_1, &sdrc_base->cs[cs].rfr_ctrl);
writel(V_ACTIMA_165, &sdrc_actim_base->ctrla);
writel(V_ACTIMB_165, &sdrc_actim_base->ctrlb);
writel(CMD_NOP, &sdrc_base ->cs[cs].manual);
writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
/*
* CAS latency 3, Write Burst = Read Burst, Serial Mode,
* Burst length = 4
*/
writel(CASL3 | BURSTLENGTH4, &sdrc_base->cs[cs].mr);
if (!mem_ok(cs))
writel(0, &sdrc_base->cs[cs].mcfg);
}
void enable_gpmc_config(u32 *gpmc_config, gpmc_csx_t *gpmc_cs_base, u32 base,
u32 size)
{
writel(0, &gpmc_cs_base->config7);
sdelay(1000);
/* Delay for settling */
writel(gpmc_config[0], &gpmc_cs_base->config1);
writel(gpmc_config[1], &gpmc_cs_base->config2);
writel(gpmc_config[2], &gpmc_cs_base->config3);
writel(gpmc_config[3], &gpmc_cs_base->config4);
writel(gpmc_config[4], &gpmc_cs_base->config5);
writel(gpmc_config[5], &gpmc_cs_base->config6);
/* Enable the config */
writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
(1 << 6)), &gpmc_cs_base->config7);
sdelay(2000);
}
/*****************************************************
* gpmc_init(): init gpmc bus
* Init GPMC for x16, MuxMode (SDRAM in x32).
* This code can only be executed from SRAM or SDRAM.
*****************************************************/
void gpmc_init(void)
{
/* putting a blanket check on GPMC based on ZeBu for now */
u32 *gpmc_config = NULL;
gpmc_t *gpmc_base = (gpmc_t *)GPMC_BASE;
gpmc_csx_t *gpmc_cs_base = (gpmc_csx_t *)GPMC_CONFIG_CS0_BASE;
u32 base = 0;
u32 size = 0;
u32 f_off = CONFIG_SYS_MONITOR_LEN;
u32 f_sec = 0;
u32 config = 0;
/* global settings */
writel(0, &gpmc_base->irqenable); /* isr's sources masked */
writel(0, &gpmc_base->timeout_control);/* timeout disable */
config = readl(&gpmc_base->config);
config &= (~0xf00);
writel(config, &gpmc_base->config);
/*
* Disable the GPMC0 config set by ROM code
* It conflicts with our MPDB (both at 0x08000000)
*/
writel(0, &gpmc_cs_base->config7);
sdelay(1000);
#if defined(CONFIG_CMD_NAND) /* CS 0 */
gpmc_config = gpmc_m_nand;
gpmc_cfg_base = gpmc_base;
nand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE +
(GPMC_CS * GPMC_CONFIG_WIDTH));
base = PISMO1_NAND_BASE;
size = PISMO1_NAND_SIZE;
enable_gpmc_config(gpmc_config, nand_cs_base, base, size);
#if defined(CONFIG_ENV_IS_IN_NAND)
f_off = SMNAND_ENV_OFFSET;
f_sec = SZ_128K;
/* env setup */
boot_flash_base = base;
boot_flash_off = f_off;
boot_flash_sec = f_sec;
boot_flash_env_addr = f_off;
#endif
#endif
#if defined(CONFIG_CMD_ONENAND)
gpmc_config = gpmc_onenand;
onenand_cs_base = (gpmc_csx_t *)(GPMC_CONFIG_CS0_BASE +
(GPMC_CS * GPMC_CONFIG_WIDTH));
base = PISMO1_ONEN_BASE;
size = PISMO1_ONEN_SIZE;
enable_gpmc_config(gpmc_config, onenand_cs_base, base, size);
#if defined(CONFIG_ENV_IS_IN_ONENAND)
f_off = ONENAND_ENV_OFFSET;
f_sec = SZ_128K;
/* env setup */
boot_flash_base = base;
boot_flash_off = f_off;
boot_flash_sec = f_sec;
boot_flash_env_addr = f_off;
#endif
#endif
}

72
cpu/arm_cortexa8/omap3/syslib.c Normal file
View file

@ -0,0 +1,72 @@
/*
* (C) Copyright 2008
* Texas Instruments, <www.ti.com>
*
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/clocks.h>
#include <asm/arch/sys_proto.h>
/************************************************************
* sdelay() - simple spin loop. Will be constant time as
* its generally used in bypass conditions only. This
* is necessary until timers are accessible.
*
* not inline to increase chances its in cache when called
*************************************************************/
void sdelay(unsigned long loops)
{
__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
"bne 1b":"=r" (loops):"0"(loops));
}
/*****************************************************************
* sr32 - clear & set a value in a bit range for a 32 bit address
*****************************************************************/
void sr32(void *addr, u32 start_bit, u32 num_bits, u32 value)
{
u32 tmp, msk = 0;
msk = 1 << num_bits;
--msk;
tmp = readl((u32)addr) & ~(msk << start_bit);
tmp |= value << start_bit;
writel(tmp, (u32)addr);
}
/*********************************************************************
* wait_on_value() - common routine to allow waiting for changes in
* volatile regs.
*********************************************************************/
u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr,
u32 bound)
{
u32 i = 0, val;
do {
++i;
val = readl((u32)read_addr) & read_bit_mask;
if (val == match_value)
return 1;
if (i == bound)
return 0;
} while (1);
}