Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

mtd: Drop unused nand_plat driver

Browse source 
This is not used since this commit:

   936478e797 SPARC: Remove

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2023-02-01 13:19:51 -07:00 committed by Tom Rini
parent 6a138b0be3
commit 49c164c310
2 changed files with 0 additions and 66 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
drivers/mtd/nand/raw/Makefile
View file

@ -71,7 +71,6 @@ obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
obj-$(CONFIG_NAND_PLAT) += nand_plat.o
obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_NAND_MXIC) += mxic_nand.o
obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o

65
drivers/mtd/nand/raw/nand_plat.c
View file

@ -1,65 +0,0 @@
/*
* Genericish driver for memory mapped NAND devices
*
* Copyright (c) 2006-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/* Your board must implement the following macros:
* NAND_PLAT_WRITE_CMD(chip, cmd)
* NAND_PLAT_WRITE_ADR(chip, cmd)
* NAND_PLAT_INIT()
*
* It may also implement the following:
* NAND_PLAT_DEV_READY(chip)
*/
#include <common.h>
#include <linux/mtd/rawnand.h>
#include <asm/io.h>
#ifdef NAND_PLAT_GPIO_DEV_READY
# include <asm/gpio.h>
# define NAND_PLAT_DEV_READY(chip) gpio_get_value(NAND_PLAT_GPIO_DEV_READY)
#endif
#include <nand.h>
static void plat_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd_to_nand(mtd);
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
NAND_PLAT_WRITE_CMD(this, cmd);
else
NAND_PLAT_WRITE_ADR(this, cmd);
}
#ifdef NAND_PLAT_DEV_READY
static int plat_dev_ready(struct mtd_info *mtd)
{
return NAND_PLAT_DEV_READY((struct nand_chip *)mtd_to_nand(mtd));
}
#else
# define plat_dev_ready NULL
#endif
int board_nand_init(struct nand_chip *nand)
{
#ifdef NAND_PLAT_GPIO_DEV_READY
gpio_request(NAND_PLAT_GPIO_DEV_READY, "nand-plat");
gpio_direction_input(NAND_PLAT_GPIO_DEV_READY);
#endif
#ifdef NAND_PLAT_INIT
NAND_PLAT_INIT();
#endif
nand->cmd_ctrl = plat_cmd_ctrl;
nand->dev_ready = plat_dev_ready;
nand->ecc.mode = NAND_ECC_SOFT;
return 0;
}