mmc: rockchip_sdhci: Disable DMA mode using a device tree property
Loading part of TF-A into SRAM from eMMC using DMA fails on RK3399 similar to other Rockchip SoCs. Checksum validation fails with: ## Checking hash(es) for Image atf-2 ... sha256 error! Bad hash value for 'hash' hash node in 'atf-2' image node spl_load_simple_fit: can't load image loadables index 1 (ret = -1) mmc_load_image_raw_sector: mmc block read error SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Add a device tree property, u-boot,spl-fifo-mode, to control when the rockchip_sdhci driver should disable the use of DMA and fallback on PIO mode. Same device tree property is used by the rockchip_dw_mmc driver. In commit2cc6cde647
("mmc: rockchip_sdhci: Limit number of blocks read in a single command") the DMA mode was disabled using a CONFIG option on RK3588. Revert that and instead disable DMA using the device tree property for all RK3588 boards, also apply similar workaround for all RK3399 boards. Fixes:2cc6cde647
("mmc: rockchip_sdhci: Limit number of blocks read in a single command") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Quentin Schulz <foss+uboot@0leil.net> # RK3399 Puma, RK3588 Tiger
This commit is contained in:
parent
41fc80b8da
commit
3b804b370d
4 changed files with 10 additions and 1 deletions
|
@ -120,6 +120,7 @@
|
|||
&sdhci {
|
||||
max-frequency = <200000000>;
|
||||
bootph-all;
|
||||
u-boot,spl-fifo-mode;
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
|
|
|
@ -153,6 +153,7 @@
|
|||
|
||||
&sdhci {
|
||||
bootph-pre-ram;
|
||||
u-boot,spl-fifo-mode;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
|
|
|
@ -60,7 +60,6 @@ CONFIG_MMC_DW=y
|
|||
CONFIG_MMC_DW_ROCKCHIP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
# CONFIG_SPL_MMC_SDHCI_SDMA is not set
|
||||
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_GMAC_ROCKCHIP=y
|
||||
|
|
|
@ -589,6 +589,14 @@ static int rockchip_sdhci_probe(struct udevice *dev)
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Disable use of DMA and force use of PIO mode in SPL to fix an issue
|
||||
* where loading part of TF-A into SRAM using DMA silently fails.
|
||||
*/
|
||||
if (IS_ENABLED(CONFIG_SPL_BUILD) &&
|
||||
dev_read_bool(dev, "u-boot,spl-fifo-mode"))
|
||||
host->flags &= ~USE_DMA;
|
||||
|
||||
/*
|
||||
* Reading more than 4 blocks with a single CMD18 command in PIO mode
|
||||
* triggers Data End Bit Error on RK3568 and RK3588. Limit to reading
|
||||
|
|
Loading…
Reference in a new issue