Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch '2022-03-25-Kconfig-migrations' into next

Browse source 
- Merge a number of Kconfig migration patches
This commit is contained in:
Tom Rini 2022-03-25 08:02:04 -04:00
commit 3b2d19c838
238 changed files with 348 additions and 432 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

45
README
View file

@ -994,10 +994,6 @@ The following options need to be configured:
display); also select one of the supported displays
by defining one of these:
CONFIG_ATMEL_LCD:
HITACHI TX09D70VM1CCA, 3.5", 240x320.
CONFIG_NEC_NL6448AC33:
NEC NL6448AC33-18. Active, color, single scan.
@ -1075,13 +1071,6 @@ The following options need to be configured:
The clock frequency of the MII bus
CONFIG_PHY_RESET_DELAY
Some PHY like Intel LXT971A need extra delay after
reset before any MII register access is possible.
For such PHY, set this option to the usec delay
required. (minimum 300usec for LXT971A)
CONFIG_PHY_CMD_DELAY (ppc4xx)
Some PHY like Intel LXT971A need extra delay after
@ -1612,26 +1601,6 @@ The following options need to be configured:
this is instead controlled by the value of
/config/load-environment.
- TFTP Fixed UDP Port:
CONFIG_TFTP_PORT
If this is defined, the environment variable tftpsrcp
is used to supply the TFTP UDP source port value.
If tftpsrcp isn't defined, the normal pseudo-random port
number generator is used.
Also, the environment variable tftpdstp is used to supply
the TFTP UDP destination port value. If tftpdstp isn't
defined, the normal port 69 is used.
The purpose for tftpsrcp is to allow a TFTP server to
blindly start the TFTP transfer using the pre-configured
target IP address and UDP port. This has the effect of
"punching through" the (Windows XP) firewall, allowing
the remainder of the TFTP transfer to proceed normally.
A better solution is to properly configure the firewall,
but sometimes that is not allowed.
CONFIG_STANDALONE_LOAD_ADDR
This option defines a board specific value for the
@ -2129,14 +2098,6 @@ Configuration Settings:
while unprotecting/erasing/programming. Please only enable
this option if you really know what you are doing.
- CONFIG_SYS_RX_ETH_BUFFER:
Defines the number of Ethernet receive buffers. On some
Ethernet controllers it is recommended to set this value
to 8 or even higher (EEPRO100 or 405 EMAC), since all
buffers can be full shortly after enabling the interface
on high Ethernet traffic.
Defaults to 4 if not defined.
- CONFIG_ENV_MAX_ENTRIES
Maximum number of entries in the hash table that is used
@ -2234,12 +2195,6 @@ Note: once the monitor has been relocated, then it will complain if
the default environment is used; a new CRC is computed as soon as you
use the "saveenv" command to store a valid environment.
- CONFIG_SYS_FAULT_ECHO_LINK_DOWN:
Echo the inverted Ethernet link state to the fault LED.
Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR
also needs to be defined.
- CONFIG_SYS_FAULT_MII_ADDR:
MII address of the PHY to check for the Ethernet link state.

3
arch/arm/include/asm/arch-bcmcygnus/configs.h
View file

@ -19,7 +19,4 @@
#define CONFIG_SYS_NS16550_CLK_DIV 54
#define CONFIG_SYS_NS16550_COM3 0x18023000
/* Ethernet */
#define CONFIG_PHY_RESET_DELAY 10000 /* PHY reset delay in us*/
#endif /* __ARCH_CONFIGS_H */

9
arch/arm/mach-at91/Kconfig
View file

@ -81,6 +81,7 @@ config TARGET_ETHERNUT5
config TARGET_SNAPPER9260
bool "Support snapper9260"
select AT91SAM9260
select AT91_WANTS_COMMON_PHY
select DM
select DM_GPIO
select DM_SERIAL
@ -89,6 +90,7 @@ config TARGET_SNAPPER9260
config TARGET_GURNARD
bool "Support gurnard"
select AT91SAM9G45
select AT91_WANTS_COMMON_PHY
select BOARD_LATE_INIT
select DM
select DM_ETH
@ -115,6 +117,7 @@ config TARGET_AT91SAM9263EK
config TARGET_USB_A9263
bool "Caloa USB A9260 board"
select AT91SAM9263
select AT91_WANTS_COMMON_PHY
config TARGET_PM9263
bool "Ronetix pm9263 board"
@ -250,6 +253,7 @@ config TARGET_MEESC
config TARGET_CORVUS
bool "Support corvus"
select AT91SAM9M10G45
select AT91_WANTS_COMMON_PHY
select DM
select DM_ETH
select DM_GPIO
@ -267,6 +271,7 @@ config TARGET_SAMA7G5EK
config TARGET_TAURUS
bool "Support taurus"
select AT91SAM9G20
select AT91_WANTS_COMMON_PHY
select DM
select DM_ETH
select DM_GPIO
@ -279,6 +284,7 @@ config TARGET_TAURUS
config TARGET_SMARTWEB
bool "Support smartweb"
select AT91SAM9260
select AT91_WANTS_COMMON_PHY
select DM
select DM_ETH
select DM_GPIO
@ -318,6 +324,9 @@ config AT91_GPIO_PULLUP
config ATMEL_LEGACY
bool "Legacy GPIO support"
config AT91_WANTS_COMMON_PHY
bool
source "board/atmel/at91sam9260ek/Kconfig"
source "board/atmel/at91sam9261ek/Kconfig"
source "board/atmel/at91sam9263ek/Kconfig"

8
arch/arm/mach-kirkwood/include/mach/config.h
View file

@ -45,14 +45,6 @@
#define NAND_ALLOW_ERASE_ALL 1
#endif
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv8831116 PHY */
#endif /* CONFIG_CMD_NET */
/*
* IDE Support on SATA ports
*/

10
arch/powerpc/cpu/mpc85xx/Kconfig
View file

@ -523,6 +523,7 @@ config ARCH_P2020
config ARCH_P2041
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -548,6 +549,7 @@ config ARCH_P2041
config ARCH_P3041
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -578,6 +580,7 @@ config ARCH_P3041
config ARCH_P4080
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -617,6 +620,7 @@ config ARCH_P4080
config ARCH_P5040
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -647,6 +651,7 @@ config ARCH_QEMU_E500
config ARCH_T1024
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -670,6 +675,7 @@ config ARCH_T1024
config ARCH_T1040
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -693,6 +699,7 @@ config ARCH_T1040
config ARCH_T1042
bool
select BACKSIDE_L2_CACHE
select E500MC
select FSL_LAW
select SYS_CACHE_SHIFT_6
@ -1108,6 +1115,9 @@ config SYS_NUM_TLBCAMS
Number of TLB CAM entries for Book-E chips. 64 for E500MC,
16 for other E500 SoCs.
config BACKSIDE_L2_CACHE
bool
config SYS_PPC64
bool

3
board/bluewater/gurnard/Kconfig
View file

@ -1,5 +1,8 @@
if TARGET_GURNARD
config GURNARD_SPLASH
def_bool y
config SYS_BOARD
default "gurnard"

3
board/ronetix/pm9263/Kconfig
View file

@ -1,5 +1,8 @@
if TARGET_PM9263
config LCD_IN_PSRAM
def_bool y
config SYS_BOARD
default "pm9263"

3
board/siemens/corvus/Kconfig
View file

@ -1,5 +1,8 @@
if TARGET_CORVUS
config AT91_LED
def_bool y
config SYS_BOARD
default "corvus"

4
cmd/Kconfig
View file

@ -1658,6 +1658,10 @@ config CMD_MII
to management parameters and services.
The interface is referred to as the MII management interface.
config MII_INIT
bool "Call mii_init() in the mii command"
depends on CMD_MII && (MPC8XX_FEC || FSLDMAFE || MCFFEC)
config CMD_MDIO
bool "mdio"
depends on PHYLIB

6
common/Kconfig
View file

@ -611,6 +611,12 @@ config PCI_INIT_R
case of DM PCI-based Ethernet devices, which will not be detected
without having the enumeration performed earlier.
config RESET_PHY_R
bool "Reset ethernet PHY during init"
help
Implement reset_phy() in board code if required to reset the ethernet
PHY.
endmenu
endmenu # Init options

52
common/lcd.c
View file

@ -90,54 +90,6 @@ static void lcd_stub_puts(struct stdio_dev *dev, const char *s)
lcd_puts(s);
}
/* Small utility to check that you got the colours right */
#ifdef LCD_TEST_PATTERN
#if LCD_BPP == LCD_COLOR8
#define N_BLK_VERT 2
#define N_BLK_HOR 3
static int test_colors[N_BLK_HOR * N_BLK_VERT] = {
CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW,
CONSOLE_COLOR_BLUE, CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN,
}; /*LCD_BPP == LCD_COLOR8 */
#elif LCD_BPP == LCD_COLOR16
#define N_BLK_VERT 2
#define N_BLK_HOR 4
static int test_colors[N_BLK_HOR * N_BLK_VERT] = {
CONSOLE_COLOR_RED, CONSOLE_COLOR_GREEN, CONSOLE_COLOR_YELLOW, CONSOLE_COLOR_BLUE,
CONSOLE_COLOR_MAGENTA, CONSOLE_COLOR_CYAN, CONSOLE_COLOR_GREY, CONSOLE_COLOR_WHITE,
};
#endif /*LCD_BPP == LCD_COLOR16 */
static void test_pattern(void)
{
ushort v_max = panel_info.vl_row;
ushort h_max = panel_info.vl_col;
ushort v_step = (v_max + N_BLK_VERT - 1) / N_BLK_VERT;
ushort h_step = (h_max + N_BLK_HOR - 1) / N_BLK_HOR;
ushort v, h;
#if LCD_BPP == LCD_COLOR8
uchar *pix = (uchar *)lcd_base;
#elif LCD_BPP == LCD_COLOR16
ushort *pix = (ushort *)lcd_base;
#endif
printf("[LCD] Test Pattern: %d x %d [%d x %d]\n",
h_max, v_max, h_step, v_step);
for (v = 0; v < v_max; ++v) {
uchar iy = v / v_step;
for (h = 0; h < h_max; ++h) {
uchar ix = N_BLK_HOR * iy + h / h_step;
*pix++ = test_colors[ix];
}
}
}
#endif /* LCD_TEST_PATTERN */
/*
* With most lcd drivers the line length is set up
* by calculating it from panel_info parameters. Some
@ -201,9 +153,6 @@ void lcd_clear(void)
bg_color = CONSOLE_COLOR_BLACK;
#endif /* CONFIG_SYS_WHITE_ON_BLACK */
#ifdef LCD_TEST_PATTERN
test_pattern();
#else
/* set framebuffer to background color */
#if (LCD_BPP != LCD_COLOR32)
memset((char *)lcd_base, bg_color, lcd_line_length * panel_info.vl_row);
@ -215,7 +164,6 @@ void lcd_clear(void)
i++) {
*ppix++ = bg_color;
}
#endif
#endif
/* setup text-console */
debug("[LCD] setting up console...\n");

2
common/miiphyutil.c
View file

@ -366,7 +366,7 @@ int miiphy_reset(const char *devname, unsigned char addr)
debug("PHY reset failed\n");
return -1;
}
#ifdef CONFIG_PHY_RESET_DELAY
#if CONFIG_PHY_RESET_DELAY > 0
udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
#endif
/*

2
configs/10m50_defconfig
View file

@ -27,6 +27,8 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xF4080000
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=0
CONFIG_ALTERA_PIO=y
CONFIG_MISC=y
CONFIG_ALTERA_SYSID=y

2
configs/3c120_defconfig
View file

@ -27,6 +27,8 @@ CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xE2880000
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=0
CONFIG_ALTERA_PIO=y
CONFIG_MISC=y
CONFIG_ALTERA_SYSID=y

3
configs/M5208EVBE_defconfig
View file

@ -14,11 +14,14 @@ CONFIG_SYS_PROMPT="-> "
CONFIG_CMD_IMLS=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0x2000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_UDP_CHECKSUM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y

3
configs/M5235EVB_Flash32_defconfig
View file

@ -20,6 +20,7 @@ CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_IS_IN_FLASH=y
@ -27,6 +28,8 @@ CONFIG_ENV_ADDR=0xFFE04000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="u-boot.bin"
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x300

3
configs/M5235EVB_defconfig
View file

@ -20,6 +20,7 @@ CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_IS_IN_FLASH=y
@ -27,6 +28,8 @@ CONFIG_ENV_ADDR=0xFFE04000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="u-boot.bin"
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x300

3
configs/M5272C3_defconfig
View file

@ -17,10 +17,13 @@ CONFIG_CMD_IMLS=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_ADDR=0xFFE04000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xFFE00201
CONFIG_SYS_OR0_PRELIM=0xFFE00014

3
configs/M5275EVB_defconfig
View file

@ -21,10 +21,13 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_ADDR=0xFFE04000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x300

3
configs/M5282EVB_defconfig
View file

@ -17,10 +17,13 @@ CONFIG_CMD_IMLS=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_ENV_ADDR=0xFFE04000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_PROTECTION=y

3
configs/M53017EVB_defconfig
View file

@ -16,11 +16,14 @@ CONFIG_SYS_PROMPT="-> "
CONFIG_CMD_IMLS=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0x40000
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_UDP_CHECKSUM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y

3
configs/M5329AFEE_defconfig
View file

@ -17,11 +17,14 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_ENV_ADDR=0x4000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_UDP_CHECKSUM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y

3
configs/M5329BFEE_defconfig
View file

@ -17,11 +17,14 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_ENV_ADDR=0x4000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_UDP_CHECKSUM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y

3
configs/M5373EVB_defconfig
View file

@ -17,11 +17,14 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_ENV_ADDR=0x4000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_UDP_CHECKSUM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y

1
configs/MCR3000_defconfig
View file

@ -42,6 +42,7 @@ CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_OF_CONTROL=y

1
configs/SBx81LIFKW_defconfig
View file

@ -18,6 +18,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set

1
configs/SBx81LIFXCAT_defconfig
View file

@ -18,6 +18,7 @@ CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set

1
configs/am43xx_evm_defconfig
View file

@ -48,6 +48,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
CONFIG_DM=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y

1
configs/am43xx_evm_qspiboot_defconfig
View file

@ -40,6 +40,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
CONFIG_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y

1
configs/am43xx_evm_rtconly_defconfig
View file

@ -42,6 +42,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
CONFIG_DM=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y

1
configs/am43xx_evm_usbhost_boot_defconfig
View file

@ -54,6 +54,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
CONFIG_DM=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y

1
configs/am43xx_hs_evm_defconfig
View file

@ -52,6 +52,7 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RETRY_COUNT=10
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
CONFIG_DM=y
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y

2
configs/at91sam9261ek_dataflash_cs0_defconfig
View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
@ -63,3 +64,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9261ek_dataflash_cs3_defconfig
View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
@ -63,3 +64,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9261ek_nandflash_defconfig
View file

@ -24,6 +24,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
@ -61,3 +62,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9263ek_dataflash_cs0_defconfig
View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
@ -67,3 +68,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9263ek_dataflash_defconfig
View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
@ -67,3 +68,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9263ek_nandflash_defconfig
View file

@ -24,6 +24,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
@ -65,3 +66,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9263ek_norflash_boot_defconfig
View file

@ -20,6 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_BOOT_NORFLASH"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
@ -65,3 +66,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

2
configs/at91sam9263ek_norflash_defconfig
View file

@ -21,6 +21,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NORFLASH"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
@ -66,3 +67,4 @@ CONFIG_DM_SPI=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
CONFIG_USB=y
CONFIG_ATMEL_LCD_BGR555=y

1
configs/at91sam9g10ek_dataflash_cs0_defconfig
View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set

1
configs/at91sam9g10ek_dataflash_cs3_defconfig
View file

@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set

1
configs/at91sam9g10ek_nandflash_defconfig
View file

@ -24,6 +24,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set

1
configs/at91sam9m10g45ek_mmc_defconfig
View file

@ -23,6 +23,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x71000000 dtb; fatload mmc 0:1 0x72000000 zImage; bootz 0x72000000 - 0x71000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set

1
configs/at91sam9m10g45ek_nandflash_defconfig
View file

@ -23,6 +23,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot> "
# CONFIG_CMD_BDI is not set

1
configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
View file

@ -39,6 +39,7 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_CLK_ZYNQMP=y
CONFIG_FPGA_XILINX=y

1
configs/axm_defconfig
View file

@ -83,6 +83,7 @@ CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_MACB=y
CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_SPECIFY_CONSOLE_INDEX=y

1
configs/bcm968380gerg_ram_defconfig
View file

@ -49,6 +49,7 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_BRCMNAND=y
CONFIG_NAND_BRCMNAND_6838=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_PHY=y
CONFIG_BCM6368_USBH_PHY=y
CONFIG_PINCTRL=y

1
configs/bitmain_antminer_s9_defconfig
View file

@ -59,6 +59,7 @@ CONFIG_ENV_IS_IN_FAT=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTP_SERVERIP=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_BOOTCOUNT_LIMIT=y

1
configs/cm_t43_defconfig
View file

@ -63,6 +63,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOOTP_SEND_HOSTNAME=y
CONFIG_SYS_RX_ETH_BUFFER=64
CONFIG_DM=y
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y

2
configs/cobra5272_defconfig
View file

@ -19,6 +19,8 @@ CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_PING=y
CONFIG_ENV_ADDR=0xFFE04000
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_BR0_PRELIM_BOOL=y
CONFIG_SYS_BR0_PRELIM=0xFFE00201
CONFIG_SYS_OR0_PRELIM=0xFFE00014

2
configs/comtrend_ar5315u_ram_defconfig
View file

@ -40,6 +40,7 @@ CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=6
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_LED=y
@ -49,6 +50,7 @@ CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_DM_ETH=y
CONFIG_BCM6368_ETH=y
CONFIG_PHY=y

2
configs/comtrend_ar5387un_ram_defconfig
View file

@ -40,6 +40,7 @@ CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=6
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_LED=y
@ -49,6 +50,7 @@ CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_DM_ETH=y
CONFIG_BCM6368_ETH=y
CONFIG_PHY=y

2
configs/comtrend_ct5361_ram_defconfig
View file

@ -38,6 +38,7 @@ CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=6
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_BCM6345_GPIO=y
@ -50,6 +51,7 @@ CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
CONFIG_PHY_FIXED=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_DM_ETH=y
CONFIG_BCM6348_ETH=y
CONFIG_PHY=y

2
configs/comtrend_vr3032u_ram_defconfig
View file

@ -40,6 +40,7 @@ CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=6
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_LED=y
@ -51,6 +52,7 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_BRCMNAND=y
CONFIG_NAND_BRCMNAND_6368=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_DM_ETH=y
CONFIG_BCM6368_ETH=y
CONFIG_PHY=y

2
configs/comtrend_wap5813n_ram_defconfig
View file

@ -38,6 +38,7 @@ CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=6
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_BCM6345_GPIO=y
@ -49,6 +50,7 @@ CONFIG_CFI_FLASH=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_BCM6368_ETH=y

1
configs/corvus_defconfig
View file

@ -75,6 +75,7 @@ CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
CONFIG_MACB=y
CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y

2
configs/d2net_v2_defconfig
View file

@ -23,6 +23,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="d2v2> "
CONFIG_CMD_EEPROM=y
@ -45,6 +46,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_SYS_SATA_MAX_DEVICE=2

2
configs/devkit3250_defconfig
View file

@ -44,6 +44,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="uImage"
CONFIG_VERSION_VARIABLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DMA_LPC32XX=y
CONFIG_LPC32XX_GPIO=y
CONFIG_SYS_I2C_LEGACY=y
@ -69,6 +70,7 @@ CONFIG_PHYLIB=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_ADDR=31
CONFIG_PHY_SMSC=y
CONFIG_RMII=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_CONS_INDEX=5
CONFIG_SYS_NS16550=y

2
configs/dns325_defconfig
View file

@ -19,6 +19,7 @@ CONFIG_BOOTCOMMAND="if test -n ${bootenv} && usb start; then if run loadbootenv;
CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_IDE=y
@ -40,6 +41,7 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0x100

1
configs/dockstar_defconfig
View file

@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_MTD=y

1
configs/dreamplug_defconfig
View file

@ -39,6 +39,7 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x100000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_SYS_SATA_MAX_DEVICE=1

2
configs/ds109_defconfig
View file

@ -21,6 +21,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv ethact egiga0; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;"
CONFIG_USE_PREBOOT=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_IDE=y
@ -38,6 +39,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x3D0000
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0x100

3
configs/eb_cpu5282_defconfig
View file

@ -23,8 +23,11 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_DATE=y
CONFIG_ENV_ADDR=0xFF040000
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x300

3
configs/eb_cpu5282_internal_defconfig
View file

@ -22,8 +22,11 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_DATE=y
CONFIG_ENV_ADDR=0xFF040000
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x300

2
configs/edminiv2_defconfig
View file

@ -18,6 +18,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_RESET_PHY_R=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
@ -33,6 +34,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFF84000
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_SYS_IDE_MAXBUS=1
CONFIG_SYS_IDE_MAXDEVICE=1
CONFIG_SYS_ATA_BASE_ADDR=0xf1080000

1
configs/ethernut5_defconfig
View file

@ -75,6 +75,7 @@ CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_MACB=y
CONFIG_RMII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_RTC_PCF8563=y

1
configs/goflexhome_defconfig
View file

@ -43,6 +43,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_SYS_SATA_MAX_DEVICE=1

5
configs/gurnard_defconfig
View file

@ -15,6 +15,7 @@ CONFIG_FIT=y
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
@ -39,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RETRY_COUNT=20
CONFIG_TFTP_PORT=y
CONFIG_TFTP_TSIZE=y
CONFIG_AT91_GPIO=y
CONFIG_GENERIC_ATMEL_MCI=y
@ -48,6 +50,7 @@ CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_ATMEL=y
CONFIG_ATMEL_NAND_HWECC=y
CONFIG_MACB=y
CONFIG_RMII=y
CONFIG_ATMEL_USART=y
CONFIG_TIMER=y
CONFIG_ATMEL_PIT_TIMER=y
@ -56,4 +59,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_DM_VIDEO=y
# CONFIG_VIDEO_LOGO is not set
# CONFIG_VIDEO_BPP32 is not set
CONFIG_ATMEL_LCD=y
CONFIG_LCD=y
CONFIG_CMD_DHRYSTONE=y

2
configs/guruplug_defconfig
View file

@ -18,6 +18,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000"
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
@ -42,6 +43,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0x100

2
configs/huawei_hg556a_ram_defconfig
View file

@ -38,6 +38,7 @@ CONFIG_CMD_PING=y
# CONFIG_CMD_SLEEP is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SYS_RX_ETH_BUFFER=6
# CONFIG_DM_DEVICE_REMOVE is not set
CONFIG_BCM6348_IUDMA=y
CONFIG_BCM6345_GPIO=y
@ -50,6 +51,7 @@ CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
CONFIG_PHY_FIXED=y
CONFIG_PHY_RESET_DELAY=20
CONFIG_DM_ETH=y
CONFIG_BCM6348_ETH=y
CONFIG_PHY=y

1
configs/ib62x0_defconfig
View file

@ -41,6 +41,7 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SYS_ATA_STRIDE=4
CONFIG_SYS_ATA_DATA_OFFSET=0x100

1
configs/iconnect_defconfig
View file

@ -42,6 +42,7 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
# CONFIG_MMC is not set
CONFIG_MTD=y

2
configs/inetspace_v2_defconfig
View file

@ -23,6 +23,7 @@ CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="ns2> "
CONFIG_CMD_EEPROM=y
@ -45,6 +46,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_SPI_MAX_HZ=20000000
CONFIG_ENV_ADDR=0x70000
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_DM=y
CONFIG_SATA_MV=y
CONFIG_SYS_SATA_MAX_DEVICE=1

1
configs/integratorap_cm720t_defconfig
View file

@ -22,6 +22,7 @@ CONFIG_CMD_ARMFLASH=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_RX_ETH_BUFFER=8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y

1
configs/integratorap_cm920t_defconfig
View file

@ -22,6 +22,7 @@ CONFIG_CMD_ARMFLASH=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_RX_ETH_BUFFER=8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y

1
configs/integratorap_cm926ejs_defconfig
View file

@ -22,6 +22,7 @@ CONFIG_CMD_ARMFLASH=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_RX_ETH_BUFFER=8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y

1
configs/integratorap_cm946es_defconfig
View file

@ -22,6 +22,7 @@ CONFIG_CMD_ARMFLASH=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_RX_ETH_BUFFER=8
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y

2
configs/km_kirkwood_128m16_defconfig
View file

@ -19,6 +19,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
@ -48,6 +49,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_KIRKWOOD_GPIO=y

2
configs/km_kirkwood_defconfig
View file

@ -19,6 +19,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
@ -48,6 +49,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_KIRKWOOD_GPIO=y

2
configs/km_kirkwood_pci_defconfig
View file

@ -20,6 +20,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
@ -49,6 +50,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_KIRKWOOD_GPIO=y

2
configs/kmcoge5un_defconfig
View file

@ -23,6 +23,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
@ -52,6 +53,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_KIRKWOOD_GPIO=y

2
configs/kmnusa_defconfig
View file

@ -23,6 +23,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
@ -52,6 +53,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_KIRKWOOD_GPIO=y

2
configs/kmsuse2_defconfig
View file

@ -24,6 +24,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
# CONFIG_BOOTM_NETBSD is not set
# CONFIG_BOOTM_PLAN9 is not set
@ -53,6 +54,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_RAM=y
CONFIG_KIRKWOOD_GPIO=y

1
configs/kontron_sl28_defconfig
View file

@ -59,6 +59,7 @@ CONFIG_OF_LIST="fsl-ls1028a-kontron-sl28 fsl-ls1028a-kontron-sl28-var1 fsl-ls102
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y

1
configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
View file

@ -43,6 +43,7 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_DM=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y

1
configs/ls1028aqds_tfa_defconfig
View file

@ -48,6 +48,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_DM=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y

1
configs/ls1028aqds_tfa_lpuart_defconfig
View file

@ -48,6 +48,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_DM=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y

1
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
View file

@ -42,6 +42,7 @@ CONFIG_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_DM=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y

1
configs/ls1028ardb_tfa_defconfig
View file

@ -47,6 +47,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_ADDR=0x20500000
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_DM=y
CONFIG_SATA=y
CONFIG_SCSI_AHCI=y

1
configs/ls1088aqds_defconfig
View file

@ -31,6 +31,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="fsl_mc lazyapply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_RESET_PHY_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5

1
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
View file

@ -32,6 +32,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_RESET_PHY_R=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y

1
configs/ls1088aqds_qspi_defconfig
View file

@ -33,6 +33,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_RESET_PHY_R=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y

1
configs/ls1088aqds_sdcard_ifc_defconfig
View file

@ -37,6 +37,7 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_RESET_PHY_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y

1
configs/ls1088aqds_sdcard_qspi_defconfig
View file

@ -38,6 +38,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_RESET_PHY_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y

1
configs/ls1088aqds_tfa_defconfig
View file

@ -35,6 +35,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y

1
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
View file

@ -33,6 +33,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y

1
configs/ls1088ardb_qspi_defconfig
View file

@ -34,6 +34,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_CMD_GREPENV=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
CONFIG_CMD_MEMINFO=y

1
configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
View file

@ -38,6 +38,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y

1
configs/ls1088ardb_sdcard_qspi_defconfig
View file

@ -39,6 +39,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_RESET_PHY_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_ENV_SUPPORT=y

Some files were not shown because too many files have changed in this diff Show more