Convert CONFIG_RESET_PHY_R to Kconfig

This converts the following to Kconfig: CONFIG_RESET_PHY_R Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 08:38:20 -04:00 · 2022-03-18 08:38:20 -04:00 · 29cc2b542d
commit 29cc2b542d
parent 5a606a4c97
99 changed files with 83 additions and 51 deletions
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@ -50,7 +50,6 @@
 */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */

 /*
--- a/common/Kconfig
+++ b/common/Kconfig
@ -611,6 +611,12 @@ config PCI_INIT_R
 	  case of DM PCI-based Ethernet devices, which will not be detected
 	  without having the enumeration performed earlier.

+config RESET_PHY_R
+	bool "Reset ethernet PHY during init"
+	help
+	  Implement reset_phy() in board code if required to reset the ethernet
+	  PHY.
+
 endmenu

 endmenu		# Init options
--- a/configs/SBx81LIFKW_defconfig
+++ b/configs/SBx81LIFKW_defconfig
@ -18,6 +18,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SILENT_U_BOOT_ONLY=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/SBx81LIFXCAT_defconfig
+++ b/configs/SBx81LIFXCAT_defconfig
@ -18,6 +18,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SILENT_U_BOOT_ONLY=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/at91sam9261ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs0_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/at91sam9261ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9261ek_dataflash_cs3_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/at91sam9261ek_nandflash_defconfig
+++ b/configs/at91sam9261ek_nandflash_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/at91sam9263ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9263ek_dataflash_cs0_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/at91sam9263ek_dataflash_defconfig
+++ b/configs/at91sam9263ek_dataflash_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/at91sam9263ek_nandflash_defconfig
+++ b/configs/at91sam9263ek_nandflash_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/at91sam9263ek_norflash_boot_defconfig
+++ b/configs/at91sam9263ek_norflash_boot_defconfig
@ -20,6 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_BOOT_NORFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/at91sam9263ek_norflash_defconfig
+++ b/configs/at91sam9263ek_norflash_defconfig
@ -21,6 +21,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_NORFLASH"
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/at91sam9g10ek_dataflash_cs0_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs0_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/at91sam9g10ek_dataflash_cs3_defconfig
+++ b/configs/at91sam9g10ek_dataflash_cs3_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="sf probe 0:3; sf read 0x22000000 0x84000 0x294000; bootm 0x22000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/at91sam9m10g45ek_mmc_defconfig
+++ b/configs/at91sam9m10g45ek_mmc_defconfig
@ -23,6 +23,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x71000000 dtb; fatload mmc 0:1 0x72000000 zImage; bootz 0x72000000 - 0x71000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/at91sam9m10g45ek_nandflash_defconfig
+++ b/configs/at91sam9m10g45ek_nandflash_defconfig
@ -23,6 +23,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/d2net_v2_defconfig
+++ b/configs/d2net_v2_defconfig
@ -23,6 +23,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="d2v2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/dns325_defconfig
+++ b/configs/dns325_defconfig
@ -19,6 +19,7 @@ CONFIG_BOOTCOMMAND="if test -n ${bootenv} && usb start; then if run loadbootenv;
 CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_IDE=y
--- a/configs/ds109_defconfig
+++ b/configs/ds109_defconfig
@ -21,6 +21,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv ethact egiga0; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;"
 CONFIG_USE_PREBOOT=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_IDE=y
--- a/configs/edminiv2_defconfig
+++ b/configs/edminiv2_defconfig
@ -18,6 +18,7 @@ CONFIG_SYS_LOAD_ADDR=0x800000
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_ARCH_MISC_INIT=y
+CONFIG_RESET_PHY_R=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
--- a/configs/gurnard_defconfig
+++ b/configs/gurnard_defconfig
@ -15,6 +15,7 @@ CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/guruplug_defconfig
+++ b/configs/guruplug_defconfig
@ -18,6 +18,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000"
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/inetspace_v2_defconfig
+++ b/configs/inetspace_v2_defconfig
@ -23,6 +23,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/km_kirkwood_128m16_defconfig
+++ b/configs/km_kirkwood_128m16_defconfig
@ -19,6 +19,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
--- a/configs/km_kirkwood_defconfig
+++ b/configs/km_kirkwood_defconfig
@ -19,6 +19,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
--- a/configs/km_kirkwood_pci_defconfig
+++ b/configs/km_kirkwood_pci_defconfig
@ -20,6 +20,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
--- a/configs/kmcoge5un_defconfig
+++ b/configs/kmcoge5un_defconfig
@ -23,6 +23,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
--- a/configs/kmnusa_defconfig
+++ b/configs/kmnusa_defconfig
@ -23,6 +23,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
--- a/configs/kmsuse2_defconfig
+++ b/configs/kmsuse2_defconfig
@ -24,6 +24,7 @@ CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_BOOTM_NETBSD is not set
 # CONFIG_BOOTM_PLAN9 is not set
--- a/configs/ls1088aqds_defconfig
+++ b/configs/ls1088aqds_defconfig
@ -31,6 +31,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="fsl_mc lazyapply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@ -32,6 +32,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@ -33,6 +33,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_BOOTCOMMAND="sf probe 0:0;sf read 0x80001000 0xd00000 0x100000; fsl_mc lazyapply dpl 0x80001000 && sf read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls1088aqds_sdcard_ifc_defconfig
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@ -37,6 +37,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@ -38,6 +38,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 CONFIG_BOOTCOMMAND="mmcinfo;mmc read 0x80001000 0x6800 0x800; fsl_mc lazyapply dpl 0x80001000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
--- a/configs/ls1088aqds_tfa_defconfig
+++ b/configs/ls1088aqds_tfa_defconfig
@ -35,6 +35,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@ -33,6 +33,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@ -34,6 +34,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@ -38,6 +38,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@ -39,6 +39,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@ -34,6 +34,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls1088ardb_tfa_defconfig
+++ b/configs/ls1088ardb_tfa_defconfig
@ -35,6 +35,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
--- a/configs/ls2080aqds_SECURE_BOOT_defconfig
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@ -21,6 +21,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/ls2080aqds_defconfig
+++ b/configs/ls2080aqds_defconfig
@ -21,6 +21,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/ls2080aqds_nand_defconfig
+++ b/configs/ls2080aqds_nand_defconfig
@ -27,6 +27,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
+CONFIG_RESET_PHY_R=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
--- a/configs/ls2080aqds_qspi_defconfig
+++ b/configs/ls2080aqds_qspi_defconfig
@ -22,6 +22,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="fsl_mc apply dpl 0x580d00000 && cp.b $kernel_start $kernel_load $kernel_size && bootm $kernel_load"
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/ls2080aqds_sdcard_defconfig
+++ b/configs/ls2080aqds_sdcard_defconfig
@ -28,6 +28,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="mmc read 0x80200000 0x6800 0x800; fsl_mc apply dpl 0x80200000 && mmc read $kernel_load $kernel_start $kernel_size && bootm $kernel_load"
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
--- a/configs/ls2080ardb_SECURE_BOOT_defconfig
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/ls2080ardb_defconfig
+++ b/configs/ls2080ardb_defconfig
@ -26,6 +26,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/ls2080ardb_nand_defconfig
+++ b/configs/ls2080ardb_nand_defconfig
@ -32,6 +32,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="env exists mcinitcmd && env exists secureboot && esbc_validate 0x5806C0000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x580d00000;run distro_bootcmd;run nor_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
--- a/configs/ls2081ardb_defconfig
+++ b/configs/ls2081ardb_defconfig
@ -29,6 +29,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_GPT=y
--- a/configs/ls2088aqds_tfa_defconfig
+++ b/configs/ls2088aqds_tfa_defconfig
@ -24,6 +24,7 @@ CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@ -27,6 +27,7 @@ CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
--- a/configs/ls2088ardb_qspi_defconfig
+++ b/configs/ls2088ardb_qspi_defconfig
@ -30,6 +30,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_BOOTCOMMAND="sf probe 0:0; sf read 0x806c0000 0x6c0000 0x40000; env exists mcinitcmd && env exists secureboot && esbc_validate 0x806C0000; sf read 0x80d00000 0xd00000 0x100000; env exists mcinitcmd && fsl_mc lazyapply dpl 0x80d00000; run distro_bootcmd;run qspi_bootcmd; env exists secureboot && esbc_halt;"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_DM=y
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@ -29,6 +29,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/ls2088ardb_tfa_defconfig
+++ b/configs/ls2088ardb_tfa_defconfig
@ -30,6 +30,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS1,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0600 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@ -32,6 +32,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@ -34,6 +34,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@ -32,6 +32,7 @@ CONFIG_DYNAMIC_SYS_CLK_FREQ=y
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@ -34,6 +34,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/lx2160ardb_tfa_stmm_defconfig
+++ b/configs/lx2160ardb_tfa_stmm_defconfig
@ -34,6 +34,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_EEPROM=y
--- a/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2162aqds_tfa_SECURE_BOOT_defconfig
@ -33,6 +33,7 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/lx2162aqds_tfa_defconfig
+++ b/configs/lx2162aqds_tfa_defconfig
@ -35,6 +35,7 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/lx2162aqds_tfa_verified_boot_defconfig
+++ b/configs/lx2162aqds_tfa_verified_boot_defconfig
@ -36,6 +36,7 @@ CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x2
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_MISC_INIT_R=y
 CONFIG_ID_EEPROM=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@ -17,6 +17,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="nas220> "
 # CONFIG_CMD_FLASH is not set
--- a/configs/net2big_v2_defconfig
+++ b/configs/net2big_v2_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="2big2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/netspace_lite_v2_defconfig
+++ b/configs/netspace_lite_v2_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/netspace_max_v2_defconfig
+++ b/configs/netspace_max_v2_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/netspace_mini_v2_defconfig
+++ b/configs/netspace_mini_v2_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/netspace_v2_defconfig
+++ b/configs/netspace_v2_defconfig
@ -24,6 +24,7 @@ CONFIG_USE_PREBOOT=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="ns2> "
 CONFIG_CMD_EEPROM=y
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@ -17,6 +17,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000"
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="nsa310s => "
 CONFIG_CMD_BOOTZ=y
--- a/configs/openrd_base_defconfig
+++ b/configs/openrd_base_defconfig
@ -20,6 +20,7 @@ CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_boota
 CONFIG_USE_PREBOOT=y
 CONFIG_LOGLEVEL=2
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_IDE=y
 CONFIG_CMD_MMC=y
--- a/configs/openrd_client_defconfig
+++ b/configs/openrd_client_defconfig
@ -21,6 +21,7 @@ CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_boota
 CONFIG_USE_PREBOOT=y
 CONFIG_LOGLEVEL=2
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_IDE=y
 CONFIG_CMD_MMC=y
--- a/configs/openrd_ultimate_defconfig
+++ b/configs/openrd_ultimate_defconfig
@ -21,6 +21,7 @@ CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_boota
 CONFIG_USE_PREBOOT=y
 CONFIG_LOGLEVEL=2
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_IDE=y
 CONFIG_CMD_MMC=y
--- a/configs/pm9g45_defconfig
+++ b/configs/pm9g45_defconfig
@ -22,6 +22,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
--- a/configs/sheevaplug_defconfig
+++ b/configs/sheevaplug_defconfig
@ -19,6 +19,7 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000;"
 CONFIG_USE_PREBOOT=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/snapper9260_defconfig
+++ b/configs/snapper9260_defconfig
@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 ip=any"
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Snapper> "
 # CONFIG_CMD_BDI is not set
--- a/configs/snapper9g20_defconfig
+++ b/configs/snapper9g20_defconfig
@ -16,6 +16,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 ip=any"
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
--- a/configs/ten64_tfa_defconfig
+++ b/configs/ten64_tfa_defconfig
@ -28,6 +28,7 @@ CONFIG_LOGLEVEL=7
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_ID_EEPROM is not set
 CONFIG_PCI_INIT_R=y
+CONFIG_RESET_PHY_R=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_BOOTMENU=y
 CONFIG_CMD_GREPENV=y
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@ -58,7 +58,6 @@
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT
 #define CONFIG_DM9000_NO_SROM
-#define CONFIG_RESET_PHY_R

 /* USB */
 #define CONFIG_USB_ATMEL
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@ -184,9 +184,6 @@
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
 #endif

-/* Ethernet */
-#define CONFIG_RESET_PHY_R		1
-
 /* USB */
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@ -46,9 +46,6 @@

 #endif

-/* Ethernet */
-#define CONFIG_RESET_PHY_R
-
 #ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env in nandflash */
 #elif CONFIG_SD_BOOT
--- a/include/configs/dockstar.h
+++ b/include/configs/dockstar.h
@ -35,8 +35,5 @@
 */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#ifdef CONFIG_RESET_PHY_R
-#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
-#endif

 #endif /* _CONFIG_DOCKSTAR_H */
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@ -29,9 +29,6 @@
 */
 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_PHY_BASE_ADR	0
-#ifdef CONFIG_RESET_PHY_R
-#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
-#endif

 /*
 * SATA Driver configuration
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@ -100,7 +100,6 @@
 #define CONFIG_MVGBE_PORTS	{1}		/* enable port 0 only */
 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION	/* don't randomize MAC */
 #define CONFIG_PHY_BASE_ADR	0x8
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #endif

--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@ -43,9 +43,6 @@
 */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#ifdef CONFIG_RESET_PHY_R
-#undef CONFIG_RESET_PHY_R      /* remove legacy reset_phy() */
-#endif

 /* SATA driver configuration */
 #define CONFIG_LBA48
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@ -32,7 +32,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#undef CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */

 /*
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
@ -26,9 +26,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	11
-#ifdef CONFIG_RESET_PHY_R
-#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
-#endif
 #endif /* CONFIG_CMD_NET */

 #endif /* _CONFIG_ICONNECT_H */
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@ -108,11 +108,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000

-/* Define phy_reset function to boot the MC based on mcinitcmd.
- * This happens late enough to properly fixup u-boot env MAC addresses.
- */
-#define CONFIG_RESET_PHY_R
-
 /*
 * Carve out a DDR region which will not be used by u-boot/Linux
 *
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@ -120,11 +120,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH	0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET	0x07000000

-/* Define phy_reset function to boot the MC based on mcinitcmd.
- * This happens late enough to properly fixup u-boot env MAC addresses.
- */
-#define CONFIG_RESET_PHY_R
-
 /*
 * Carve out a DDR region which will not be used by u-boot/Linux
 *
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@ -92,7 +92,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
 #define CONFIG_PHY_BASE_ADR		7
-#undef CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */

 #ifdef CONFIG_SATA
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@ -68,11 +68,6 @@
 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET	0x00F20000
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS	5000

-/* Define phy_reset function to boot the MC based on mcinitcmd.
- * This happens late enough to properly fixup u-boot env MAC addresses.
- */
-#define CONFIG_RESET_PHY_R
-
 /*
 * Carve out a DDR region which will not be used by u-boot/Linux
 *
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@ -68,7 +68,6 @@

 /* Ethernet */
 #define CONFIG_RMII
-#undef CONFIG_RESET_PHY_R

 /* hw-controller addresses */
 #define CONFIG_ET1100_BASE		0x70000000
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@ -27,7 +27,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	1
-#define CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */

 /* SATA driver configuration */
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@ -39,9 +39,6 @@
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PD3
 #endif

-/* Ethernet */
-#define CONFIG_RESET_PHY_R
-
 #ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env in nandflash */
 #elif CONFIG_SD_BOOT
--- a/include/configs/pogo_e02.h
+++ b/include/configs/pogo_e02.h
@ -31,8 +31,5 @@
 */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#ifdef CONFIG_RESET_PHY_R
-#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
-#endif

 #endif /* _CONFIG_POGO_E02_H */
--- a/include/configs/pogo_v4.h
+++ b/include/configs/pogo_v4.h
@ -38,9 +38,6 @@
 */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#ifdef CONFIG_RESET_PHY_R
-#undef CONFIG_RESET_PHY_R	/* remove legacy reset_phy() */
-#endif

 /*
 * Support large disk for SATA and USB
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@ -39,7 +39,6 @@

 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_RESET_PHY_R
 #define CONFIG_TFTP_PORT

 /* USB */
--- a/include/configs/snapper9g45.h
+++ b/include/configs/snapper9g45.h
@ -40,7 +40,6 @@

 /* Ethernet */
 #define CONFIG_RMII
-#define CONFIG_RESET_PHY_R
 #define CONFIG_TFTP_PORT

 /* LCD */