Difuse/u-boot
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Coding Style cleanup: drop some excessive empty lines

Browse source 
Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
Wolfgang Denk 2013-10-04 17:43:26 +02:00 committed by Tom Rini
parent d4c8aa9cb4
commit 16641d52fc
12 changed files with 0 additions and 46 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/arm/cpu/armv7/omap5/prcm-regs.c
View file

@ -526,8 +526,6 @@ struct prcm_regs const omap5_es2_prcm = {
.cm1_abe_timer8_clkctrl = 0x4a004580, .cm1_abe_timer8_clkctrl = 0x4a004580,
.cm1_abe_wdt3_clkctrl = 0x4a004588, .cm1_abe_wdt3_clkctrl = 0x4a004588,
/* cm2.ckgen */ /* cm2.ckgen */
.cm_clksel_mpu_m3_iss_root = 0x4a008100, .cm_clksel_mpu_m3_iss_root = 0x4a008100,
.cm_clksel_usb_60mhz = 0x4a008104, .cm_clksel_usb_60mhz = 0x4a008104,

1
board/LEOX/elpt860/README.LEOX
View file

@ -46,7 +46,6 @@ U-Boot, at the address of 0x03000000.
============================================================================= =============================================================================
################################################## ##################################################
# Operation on the serial console (SMC1) # Operation on the serial console (SMC1)
############################## ##############################

17
board/palmtreo680/README
View file

@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love
to hear from you if you succeed. to hear from you if you succeed.
Details on the SPL Details on the SPL
================== ==================
@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the
remainder of u-boot and jumps to it. remainder of u-boot and jumps to it.
The docg4's "reliable mode" The docg4's "reliable mode"
=========================== ===========================
@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does
read in reliable mode, in the same fashion as the IPL. read in reliable mode, in the same fashion as the IPL.
Details on the IPL and its data format Details on the IPL and its data format
====================================== ======================================
@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
of the IPL, and expects the image to be stored in the same format. of the IPL, and expects the image to be stored in the same format.
Instructions on Programming u-boot to flash Instructions on Programming u-boot to flash
=========================================== ===========================================
@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the
flash using Linux running on the Treo. flash using Linux running on the Treo.
Hardware Prerequisites Hardware Prerequisites
====================== ======================
@ -136,7 +131,6 @@ A Linux desktop PC.
to flash, you'll really want to use a Linux PC. to flash, you'll really want to use a Linux PC.
Treo-side Software Prerequisites Treo-side Software Prerequisites
================================ ================================
@ -152,7 +146,6 @@ Linux bootloader for PalmOS:
parameters passed to the kernel. parameters passed to the kernel.
Linux kernel: Linux kernel:
The kernel on the Treo 680 is still a little rough around the edges, and the The kernel on the Treo 680 is still a little rough around the edges, and the
@ -200,7 +193,6 @@ Linux kernel:
and /dev/mtd2 for these partitions, respectively. Ensure that your root file and /dev/mtd2 for these partitions, respectively. Ensure that your root file
system at least has /dev/mtd1 if you are not running udev or mdev. system at least has /dev/mtd1 if you are not running udev or mdev.
Userspace Utilities: Userspace Utilities:
In addition to everything necessary to provide a useful userspace environment In addition to everything necessary to provide a useful userspace environment
@ -221,19 +213,16 @@ Userspace Utilities:
from the mtd-utils package. from the mtd-utils package.
Desktop PC-side Software Prerequisites Desktop PC-side Software Prerequisites
====================================== ======================================
Terminal emulator application: Terminal emulator application:
minicom, kermit, etc. minicom, kermit, etc.
Linux kernel: Linux kernel:
Compiled with CONFIG_USB_SERIAL enabled. Build this as a module. Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
Recommended (Not directly related to u-boot) Recommended (Not directly related to u-boot)
============================================ ============================================
@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when
mounting to avoid the need to run a portmapper like rpcbind. mounting to avoid the need to run a portmapper like rpcbind.
Preliminaries Preliminaries
============= =============
@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card.
If all of the above went well, you can now program u-boot. If all of the above went well, you can now program u-boot.
Programming u-boot Programming u-boot
================== ==================
@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
Shutdown linux, remove and re-insert the battery, hold your breath... Shutdown linux, remove and re-insert the battery, hold your breath...
Enjoying u-boot Enjoying u-boot
=============== ===============
@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be
corrected soon. corrected soon.
Customizing Customizing
=========== ===========
@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this
should be straightforward. should be straightforward.
Restoring PalmOS Restoring PalmOS
================ ================
@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1
dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1 dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
modprobe -r docg4 modprobe -r docg4
TODO TODO
==== ====

2
board/sandpoint/README
View file

@ -15,8 +15,6 @@ tkoeller@gmx.net.
Thomas Koeller Thomas Koeller
The port was tested on a Sandpoint 8240 X3 board, with U-Boot The port was tested on a Sandpoint 8240 X3 board, with U-Boot
installed in the flash memory of the CPU card. Please use the installed in the flash memory of the CPU card. Please use the
following DIP switch settings: following DIP switch settings:

4
board/siemens/rut/board.c
View file

@ -328,8 +328,6 @@ static int get_clk(struct dpll_regs *dpll_regs)
return f; return f;
}; };
int clk_get(int clk) int clk_get(int clk)
{ {
return get_clk(&dpll_lcd_regs); return get_clk(&dpll_lcd_regs);
@ -426,7 +424,5 @@ static int board_video_init(void)
return 0; return 0;
} }
#endif /* ifdef CONFIG_VIDEO */ #endif /* ifdef CONFIG_VIDEO */
#include "../common/board.c" #include "../common/board.c"

7
doc/README.gpt
View file

@ -6,7 +6,6 @@
# #
# SPDX-License-Identifier: GPL-2.0+ # SPDX-License-Identifier: GPL-2.0+
Glossary: Glossary:
======== ========
- UUID -(Universally Unique Identifier) - UUID -(Universally Unique Identifier)
@ -22,7 +21,6 @@ Introduction:
This document describes the GPT partition table format and usage of This document describes the GPT partition table format and usage of
the gpt command in u-boot. the gpt command in u-boot.
UUID introduction: UUID introduction:
==================== ====================
@ -78,7 +76,6 @@ GPT brief explanation:
LBA -1 |Secondary GPT Header | LBA -1 |Secondary GPT Header |
---------------------------------------------------------- ----------------------------------------------------------
For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called
"protective MBR". "protective MBR".
Its first partition entry ID has 0xEE value, and disk software, which is not Its first partition entry ID has 0xEE value, and disk software, which is not
@ -114,7 +111,6 @@ Offset Size Description
TOTAL: 512 B TOTAL: 512 B
IMPORTANT: IMPORTANT:
GPT headers and partition entries are protected by CRC32 (the POSIX CRC32). GPT headers and partition entries are protected by CRC32 (the POSIX CRC32).
@ -132,7 +128,6 @@ sizeof(partition_entry_size (usually 128)))
Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect
of the Primary. of the Primary.
Partition Entry Format: Partition Entry Format:
---------------------- ----------------------
Offset Size Description Offset Size Description
@ -150,7 +145,6 @@ of the Primary.
Bit 62 - Hidden Bit 62 - Hidden
Bit 63 - Not mount Bit 63 - Not mount
Creating GPT partitions in U-Boot: Creating GPT partitions in U-Boot:
============== ==============
@ -171,7 +165,6 @@ To restore GUID partition table one needs to:
2. From u-boot prompt type: 2. From u-boot prompt type:
gpt write mmc 0 $partitions gpt write mmc 0 $partitions
Useful info: Useful info:
============ ============

1
doc/README.p1010rdb
View file

@ -185,7 +185,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz):
=> reset => reset
Boot Linux from network using TFTP on P1010RDB Boot Linux from network using TFTP on P1010RDB
============================================== ==============================================
Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area.

1
doc/README.qemu-mips
View file

@ -15,7 +15,6 @@ recent qemu versions. When using emulated flash, launch with
-pflash <filename> and erase mips_bios.bin. -pflash <filename> and erase mips_bios.bin.
Notes for the Qemu MIPS port Notes for the Qemu MIPS port
---------------------------- ----------------------------

1
doc/driver-model/UDM-block.txt
View file

@ -218,7 +218,6 @@ II) Approach
in near future. in near future.
III) Analysis of in-tree drivers III) Analysis of in-tree drivers
-------------------------------- --------------------------------

5
drivers/usb/gadget/f_mass_storage.c
View file

@ -9,7 +9,6 @@
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/ */
/* /*
* The Mass Storage Function acts as a USB Mass Storage device, * The Mass Storage Function acts as a USB Mass Storage device,
* appearing to the host as a disk drive or as a CD-ROM drive. In * appearing to the host as a disk drive or as a CD-ROM drive. In
@ -153,7 +152,6 @@
* <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
*/ */
/* /*
* Driver Design * Driver Design
* *
@ -264,7 +262,6 @@
static const char fsg_string_interface[] = "Mass Storage"; static const char fsg_string_interface[] = "Mass Storage";
#define FSG_NO_INTR_EP 1 #define FSG_NO_INTR_EP 1
#define FSG_NO_DEVICE_STRINGS 1 #define FSG_NO_DEVICE_STRINGS 1
#define FSG_NO_OTG 1 #define FSG_NO_OTG 1
@ -2629,8 +2626,6 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
return ret; return ret;
} }
static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
{ {
struct fsg_dev *fsg = fsg_from_func(f); struct fsg_dev *fsg = fsg_from_func(f);

4
include/configs/T4240EMU.h
View file

@ -30,7 +30,6 @@
#define CONFIG_DDR_CLK_FREQ 133333333 #define CONFIG_DDR_CLK_FREQ 133333333
#define CONFIG_FSL_TBCLK_EXTRA_DIV 100 #define CONFIG_FSL_TBCLK_EXTRA_DIV 100
/* /*
* DDR Setup * DDR Setup
*/ */
@ -76,7 +75,6 @@
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
/* I2C */ /* I2C */
#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ #define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */
#define CONFIG_SYS_FSL_I2C2_SPEED 4000000 #define CONFIG_SYS_FSL_I2C2_SPEED 4000000
@ -104,8 +102,6 @@
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
#define CONFIG_BOOTDELAY 0 #define CONFIG_BOOTDELAY 0
/* /*

1
tools/buildman/README
View file

@ -677,7 +677,6 @@ the build speed by building all commits for a board instead of the other
way around. way around.
Simon Glass Simon Glass
sjg@chromium.org sjg@chromium.org
Halloween 2012 Halloween 2012