u-boot/arch/arm/mach-bcm283x/Makefile

#
# (C) Copyright 2012 Stephen Warren
#
# SPDX-License-Identifier:	GPL-2.0
#

obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o
obj-y	+= init.o reset.o mbox.o phys2bus.o
ARM: add basic support for the Broadcom BCM2835 SoC This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2012-08-05 16:07:21 +00:00			`#`
bcm2835/rpi: add SPDX license tags for some files Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2015-02-16 19:16:13 +00:00			`# (C) Copyright 2012 Stephen Warren`
ARM: add basic support for the Broadcom BCM2835 SoC This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2012-08-05 16:07:21 +00:00			`#`
bcm2835/rpi: add SPDX license tags for some files Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2015-02-16 19:16:13 +00:00			`# SPDX-License-Identifier: GPL-2.0`
ARM: add basic support for the Broadcom BCM2835 SoC This SoC is used in the Raspberry Pi, for example. For more details, see: http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf. Initial support is enough to boot to a serial console, execute a minimal set of U-Boot commands, download data over a serial port, and boot a Linux kernel. No storage or network drivers are implemented. GPIO driver originally by Vikram Narayanan <vikram186@gmail.com> with many fixes from myself. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> 2012-08-05 16:07:21 +00:00			`#`

ARM: bcm283x: merge BCM2835/BCM2836 directories into mach-bcm283x BCM2835 (used on Raspberry Pi) and BCM2836 (used on Raspberry Pi 2) are similar enough. One of the biggest differences is the ARM processor. It is reasonable to collect the source files into a single place, arch/arm/mach-bcm283x/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> 2015-03-19 10:42:56 +00:00			`obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o`
ARM: bcm283x: Switch to generic timer Switch to generic timer implementation from lib/time.c . This also fixes a signed overflow which was in __udelay() implementation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> 2015-05-04 20:54:37 +00:00			`obj-y += init.o reset.o mbox.o phys2bus.o`