@kochstefan got the module to work on Asterisk 15. Update the Makefile
and include the new variant.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The hack does not work on the buildbots. In the SDK the other packages'
Makefiles and patch directories aren't available, hence the hack fails.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds a mechanism that disables all modules by default and then
enables only the modules needed for the packages selected, resulting in
less build time.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds a mechanism that disables all modules by default and then
enables only the modules needed for the packages selected, resulting in
less build time.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
@kochstefan pointed out that asterisk 15 doesn't load any modules. It
turned out that this happens because of patch that was dropped. Add the
patch again.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- remove some whitespaces
- install only the configuration example from the source instead of the
locally kept files (which are probably outdated anyway)
- add a comment explaining the iostream hack
- use proper install routine instead of "$(CP)"
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The package currently fails to build because librem headers cannot be
found. For reasons unknown baresip searches in SYSROOT instead of
SYSROOT_ALT for them. Fix this by patching the Makefile.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Remove unneeded variables, whitespaces and trailing slashes, use
specific INSTALL directive instead of "$(CP)".
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Change from custom make call to using the default Build/Compile routine.
This applies the standard memory corruption mitigation methods, e.g.
FORTIFY_SOURCE and RELRO, to the package if they are enabled (default).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Remove unneeded variables, dependencies, whitespaces and trailing
slashes, use specific INSTALL directive instead of "$(CP)".
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Change from custom make call to using the default Build/Compile routine.
This applies the standard memory corruption mitigation methods, e.g.
FORTIFY_SOURCE and RELRO, to the package if they are enabled (default).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- bump to 1.4.2 (includes Asterisk 15 support)
- clean up the Makefile (whitespaces, remove some leftover defines that
are no longer needed etc.)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Update to latest commit to get support for Asterisk 15
- Upstream renamed the project from chan-sccp-b to chan-sccp. This
commit updates the OpenWrt Makefile accordingly.
- Move the directory from chan-sccp-b to asterisk-chan-sccp (follow the
naming of the other channel drivers' directories).
- OpenWrt Asterisk13 is mistaken for Asterisk15 because it has the
iostream patch applied, fix this with workaround in autoconf script.
- Update upstream URL to the github page.
- Update description of the package.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commit unpacks the sources of lib_ifxos, drv_tapi and drv_vmmc,
patches them and sets up their header files for the compiler to use when
building chan-lantiq.
The dependency on kmod-ltq-vmmc is dropped so that the package can be
built by the buildbots. Instead, a dependency on mips is added so that
the buildbots will only build the package for the ARCH that Lantiq
actually runs on.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Instead of using local copies pull the source from github. The source
version is selected via CHAN_LANTIQ_VERSION, so there can be a different
version for each VARIANT.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds support for the following calendars:
- CalDAV
- MS Exchange Web Service
- MS Exchange
- iCalendar
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds support for the following calendars:
- CalDAV
- MS Exchange Web Service
- MS Exchange
- iCalendar
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
With the recently updated libsrtp2 asterisk 15 compiles fine, so it
doesn't need to be forcefully prevented anymore from linking against it.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
With the recently updated libsrtp2 asterisk 13 compiles fine, so it
doesn't need to be forcefully prevented anymore from linking against it.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The previously conceived hack - to make the buildbots actually build
this package during the target phase - does not work. This patch removes
the hack. This includes removing the lines from the asterisk Makefiles
that tar up the asterisk headers.
The upside of removing the hack is that the package name can be reverted
to what it was before, so it can be found in the same place like all the
other asterisk modules, i.e. below its asterisk version.
Another upside is that the Makefile does not pretend to solve the
problem anymore. Issue #193 is still open for the same. Maybe some day
somebody can figure out how to resolve the problem properly.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Several method signatures have changed in bcg729 1.0.1
and higher. This issue was already resolved in upstream.
In the current development branch, there is no compilable
version. Due to those changes, I have disabled linking
against bcg729 since we have bcg729 at version 1.0.2.
By disabling bcg729 the internal g729 rtpproxy API
will be used.
Signed-off-by: Jiri Slachta <jiri@slachta.eu>
I introduce asterisk 15.x as a replacement for asterisk 11.x. Currently
without support for chan-lantiq and sccp-b. Those features are going to
be added soon after this introduction.
Signed-off-by: Jiri Slachta <jiri@slachta.eu>
Asterisk-11.x has been marked as obsolete by upstream, thus we
cannot provide support for this version in telephony repository.
Asterisk at version 11.x is no longer with us, however its successor
is going to be in the repository for a quite a long time. Please use
13.x or newer version.
Signed-off-by: Jiri Slachta <jiri@slachta.eu>
When building using the SDK the $(SOURCE) variable is set differently,
resulting in files not being found. Not using the variable and using
"./" instead works fine.
This fixes issue #190. Thanks to @Bongo79 for reporting and providing
the fix.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Plain git:// doesn't add security. Use https:// instead. See
https://gist.github.com/grawity/4392747.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Cosmetic: change version from 1.0 to git checkout date.
- Remove dependency on asterisk, as otherwise the package won't be
built by the build bots.
- Without asterisk in the staging directory the asterisk headers are
now taken from an archive in $(DL_DIR), which is stored there by the
asterisk package.
- The naming of the package needs to be changed, as without the
dependency on asterisk it would otherwise mess with asterisk's
menuconfig layout.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Store asterisk headers in $(DL_DIR) so chan-lantiq can access them
during the target specific build phase. The headers are tarred up for
"mips_24kc" only because that is currently the only used arch for all
chan-lantiq targets.
Store one archive for each combination of asterisk version (e.g. 13) and
branch (using $(VERSION_NUMBER)). The latter makes sure that a release
build doesn't overwrite the header archive of a master snapshot build
and vice vera.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Currently chan-lantiq doesn't build on the build bots and users end up
having to build it themselves. The reason for this was explained by
Mathias Kresin here:
http://lists.infradead.org/pipermail/lede-dev/2017-September/008886.html.
To fix this put chan-lantiq into its own package and set
PKG_FLAGS:=nonshared. The new package uses variants already, so it is
easily extendable in the future.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Sync module to master.
- Drop big endian patch as it was included upstream.
- This fixes endian issue reported at
https://github.com/wdoekes/asterisk-chan-dongle/issues/44.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds ASTERISK-24517.patch from alpine linux. Without the patch
there are problems with the tcp/tls wrapper when running on a musl
toolchain. This is visible when toying with AMI:
LEDE*CLI> !nc localhost 5038
[Sep 10 12:13:25] WARNING[10315]: tcptls.c:684 handle_tcptls_connection: FILE * open failed!
This fixes issue #185 for asterisk 13 in trunk. The patch cannot be
applied to asterisk 11.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Asterisk 11 cannot deal with a unicode-enabled libedit. Input is not
possible anymore. Use the internal copy. Asterisk 13 works fine with the
external libedit.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The configuration file protection for modules does not work when there
is more than one configuration file. Currently conffiles is populated
with a space separated list. But the items need to be separated by
newlines. With spaces, only the first item gets added to conffiles. The
remaining items are dropped and not protected. Fix this by replacing
spaces with newlines.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Don't add extra TARGET_LDFLAGS for asterisk13-pbx-lua. It is not
needed anymore.
- Stop setting -Wl,-rpath-link in LDFLAGS. There seems to be no point to
do that (anymore).
- Stop calling specific make targets like version.h; make handles the
build properly without it.
- Add AST_FORTIFY_SOURCE to MAKE_FLAGS (seen in Debian rules file,
prevents asterisk's build system to mess with OpenWrt/LEDE flags).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Remove some unneeded parentheses.
- Use CONFIGURE_VARS instead of SITE_VARS.
- Clean up user.mak input, add NDEBUG=1 to avoid debug asserts.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Set data dir to /usr/share/asterisk and use default locations for
everything else.
- This is more in line with FHS and fixes issue #38. Database files are
now written to tmpfs (/var is mounted there). This prevents the
rootfs from filling up. It also prevents the flash to degrade during
constant database rewriting.
- As the data dir changes, so does the location of the sound files. This
commit also takes care of that.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
uclibc doesn't include iconv, so we need to use libiconv-full. This
fixes the ARC builds as they still default to uclibc.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
uclibc doesn't include iconv, so we need to use libiconv-full. This
fixes the ARC builds as they still default to uclibc.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Add new module. Iconv is available in the toolchain, so it doesn't cost
anything. Don't add it when uclibc is used, because there an external
libiconv would be needed.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
libedit now includes a pkgconfig file, meaning asterisk can detect it.
So use the system libedit instead having asterisk include an internal
copy.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Make the Makefile use BUILD_VARIANT so the package can be built for
different Asterisk versions. This is also the reason why the folder is
renamed from asterisk-11.x-chan-dongle to asterisk-chan-dongle.
- Change source URI from upstream to the fork of wdoekes. Upstream
doesn't update the repo anymore, wdoekes does.
- Remove dep on libiconv-full, make the package use toolchain's iconv
(compile-tested with musl).
- Drop patches that are already upstream.
- Update flags.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Add missing modules to curl and odbc packages. This fixes issue #181.
- Add back pbx-lua, which apparently was dropped earlier.
- Revision bump.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Don't add extra TARGET_LDFLAGS for asterisk13-pbx-lua. It is not
needed anymore (apart from that the module isn't available currently,
see next commit).
- Stop setting -Wl,-rpath-link in LDFLAGS. There seems to be no point to
do that (anymore).
- Stop calling specific make targets like version.h; make handles the
build properly without it.
- Use the default compile routine instead of the custom one.
- Add AST_FORTIFY_SOURCE to MAKE_FLAGS (seen in Debian rules file,
prevents asterisk's build system to mess with OpenWrt/LEDE flags).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Remove some unneeded parentheses.
- Remove $(SITE_VARS) as it is not used.
- Remove --without-curl and --with-uuid=... from configure arguments as
they've been removed from configure.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Set data dir to /usr/share/asterisk and use default locations for
everything else.
- This is more in line with FHS and fixes issue #38. Database files are
now written to tmpfs (/var is mounted there). This prevents the
rootfs from filling up. It also prevents the flash to degrade during
constant database rewriting.
- As the data dir changes, so does the location of the sound files. This
commit also takes care of that.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- As suggested by upstream in issue #167, move from svn to git source.
The resulting module is less than half the size in comparison.
- Rework (and rename) previous "drop-Og-optimization" patch. The
previous patch worked fine with -Os in CFLAGS (default). But if numeric
values are used instead (e.g. -O2) this optimization would be completely
removed. The new patch prevents that.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Remove two modules from pjsip. Upstream removed res_pjsip_log_forwarder
and moved res_pjsip_multihomed to res_pjsip.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- The configuration file protection for modules does not work when there
is more than one configuration file. Currently conffiles is populated
with a space separated list. But the items need to be separated by
newlines. With spaces, only the first item gets added to conffiles. The
remaining items are dropped and not protected. Fix this by replacing
spaces with newlines. Revision bump because this could lead to
overwriting files unintentionally.
- Remove a duplicate '/etc/asterisk/modules.conf' from
Package/asterisk13/conffiles.
- Remove '/etc/asterisk/rtp.conf' from Package/asterisk13/conffiles
because the file is installed and protected by res-rtp-asterisk.
- Add missing stasis.conf and pjsip_wizard.conf.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- bumped to 3.5.1
- removed musl patch because it was upstreamed
- add patch to fix ncurses detection
- fixes issue #125
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- add some pjsip modules that were missing.
- sort pjsip modules alphabetically.
- add a patch from ASTERISK-26518 to fix the unresolved symbol issue.
The patch is also included in Debian. The patch fixes issue #77 (the
problem was also mentioned in #88).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Make "--disable-floating-point" depend on SOFT_FLOAT
- Remove "--disable-ilbc-coder" as configure no longer recognizes it.
- Align args with the ones used by Asterisk (for their bundled pjproject);
this includes adding "--disable-resample".
- With libresample removed remove the dep from asterisk13 accordingly.
- Note: the disabled items are _not_ used by Asterisk anyway.
- Drop speex dep as pjproject does not link against it the way it is
configured.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Set PKG_BUILD_DIR for each variant. Without it only one variant gets
built and put into both packages. This fixes issue #150.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Set PKG_BUILD_DIR for each variant. Without it only one variant gets
built and put into both packages.
- Add libiconv to build deps. Some iconv m4 files are required. Possibly
fixes issue #121.
- Replace recently added configure args with the ones suggested by upstream
@dkgroot in issue #167. This again shaves some bytes off the package.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This package is just wasting space on the mirrors. Only very few people
will actually want the sound files on their device. And those few who do
will have no problem downloading the files manually.
Get rid of it.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Replace $FS_STABLE_PREFIX_DIR with $FS_STABLE_DATA_DIR. The variable
is set to /usr/share/freeswitch, so it's not the prefix. Data dir is
the correct description.
- Remove lots of lines from CONFIGURE_ARGS. All of them duplicates,
because they're already set by the build system, so we can remove the
clutter.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
In issue #173 a segmentation fault occuring during a simple SIP call was
reported. Compiling with LOW_MEMORY disabled the reproducible segfault
disappeared.
This commits adds a switch for LOW_MEMORY. Default is off. If anybody
wants to debug the segfault s/he can enable it.
The segfault was reported for Asterisk 11. Disable LOW_MEMORY on
Asterisk 13 anyway, better safe than sorry.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Bump to revision 6728.
- Remove '-fi' from PKG_FIXUP. Trust in the build system to do the right
thing.
- Set PKG_INSTALL:=1 so "make install" doesn't need to be called
manually anymore. This also drops LOW_MEMORY from CFLAGS, which is not
needed as chan-sccp-b looks into asterisk's headers to find out if
LOW_MEMORY is enabled or not.
The build output actually looks much more pleasant afterward.
- Disable chan-sccp-b's optimization which it enables by default. It
sets -O3 and all that jazz. To make it simply use the OpenWrt/LEDE
flags optimization needs to be disabled.
- With optimization disabled chan-sccp-b still adds -Og to the end of
the CFLAGS. Add a small patch to prevent that.
- Disable debug which is enabled by default. This brings down the size
of the installed binary from 14 MByte (!) to a little over 2 MByte
(checked on ARM).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Asterisk 13 looks for libsrtp2. Unfortunately it also looks for a header
which libsrtp2 does not make public:
res_srtp.c:44:33: fatal error: srtp2/crypto_types.h: No such file or directory
compilation terminated.
This causes the asterisk build to fail. Fix this by disabling libsrtp2
detection in Asterisk 13.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
dahdi-linux fails to build on aarch64. Disable chan-dahdi for this arch
accordingly, so asterisk can still be built.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
LOW_MEMORY can't be enabled by defining it in ASTCFLAGS. This can be
verified in the headers Asterisk installs: LOW_MEMORY actually is not
defined (it would be if LOW_MEMORY was enabled).
LOW_MEMORY can be enabled successfully with menuselect. This commit
makes menuselect usable and calls it to enable LOW_MEMORY.
This commit also disables BUILD_NATIVE with menuselect. So even if
configure detects that -march=native is available, it won't be used.
This means the configure.ac patch that was added previously can be
dropped.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
menuselect often fails on the buildbots:
menuselect/menuselect: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory
This doesn't happen on all builds. The assumption is that on the
particular buildbot where there is no error the buildbots own libxml2.so
is usable (it exists and the version is suitable).
To fix this make the linker add an rpath to the menuselect utility,
pointing to the hostpkg lib dir.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The variable prevents the ifneqs from working on the buildbots. $(SDK)
is set there, so the ifneqs that test for empty will always be true.
libpq for instance doesn't build on aarch64. So the asterisk pgsql
package has a dependency on @!aarch64. An ifneq is used to disable libpq
detection by the configure script, to prevent the build to fail. But
because of $(SDK) being set the ifneq is always true, so libpq detection
is enabled, causing the build to always fail.
There are only two other packages in the tree that actually use the
$(SDK) variable, so it's fair to assume it's not needed for the asterisk
packages and can just be dropped.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Include host-build.mk, otherwise $HOST_CONFIGURE_ARGS will be empty.
- Remove --with-ncurses=PATH as the PATH is wrong. The ncurses host
package does not install anything but 'tic'.
- Use $HOSTCC to compile menuselect. This has the added bonus of using
ccache (if selected).
- Run configure with an unset $CONFIG_SITE so that it doesn't pick a
cross-compile site-script, e.g. for mips.
- Drop '-lxml2' from $LDFLAGS as the menuselect Makefile will add it
anyway.
- Move the variables in front of 'make' as they're not arguments.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This adds a new Makefile as this module is out-of-tree. The module
dynamically links against bcg729.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Version bump to 13.17.0
- Remove makeopts.embed_rules as the target got removed.
- Refresh patches.
- $(STAGING_DIR)/host doesn't work anymore resulting in libxml2 host
headers not being found. Replace with $(STAGING_DIR_HOSTPGK).
- Prevent Asterisk from adding -march=native when cross-compiling (patch
for configure.ac).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Refresh patches.
- $(STAGING_DIR)/host doesn't work anymore resulting in libxml2 host
headers not being found. Replace with $(STAGING_DIR_HOSTPGK).
- Prevent Asterisk from adding -march=native when cross-compiling (patch
for configure.ac).
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
mod_v8 sporadically failed to build due to a segmentation fault when
generating the heap snapshot. This patch adds a switch to FreeSWITCH to
disable the snapshot and a symbol to toggle it.
Default is to not use a heap snapshot.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Replace main COPTS fixes patch with the updated version sent upstream.
- For the above to work we need to update DEFAULT_VARS in modmake.rules
(new patch)
- mod_pocketsphinx and mod_radius_cdr updated, no more extra COPTS fixes
required there.
- Now zeromq gets to use fortify headers and fails (warning about GCC
extension turns into error), so make it drop '-pedantic'.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Add mod_portaudio, mod_portaudio_stream, mod_radius_cdr and mod_v8.
- mod_v8 takes some time to build and it's quite large, so only build it
for x86_64. Users can force it on via a symbol for targets arm, i386
and mipsel as well.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Add missed dependency on libyuv to libvpx.
- Get rid of gratuitous @ in Config.in.
- Clean up Perl and Python deps.
- Fix installation paths for the ESL packages.
- Don't set ac_cv_lib_perl_perl_alloc=yes, it's not needed.
- Get rid of the build dep on erlang. Have the modules (erlang_event and
kazoo) depend on erlang instead; they both require epmd at runtime.
- Force spandsp and pocketsphinx to use fixed point math when soft float
support is enabled for the target device.
- Make libvpx use OpenWrt/LEDE flags, otherwhise it comes up with
optimized flags on its own.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Fix alphabetical sorting.
- Move some of the blocks around, e.g. move everything together that
adds to $(CONFIGURE_ARGS), move Download define upward to the other
defines etc.
- Replace some strings with variables, e.g. $(FIND) and $(FPIC).
- Be consistent and prefix our own variables with "FS_STABLE_".
- Remove the dev package and use Build/InstallDev instead.
- All in all this change is purely cosmetic.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Use lists for the config entries outbound_domain_{name,host,port}.
This permits multiple outbound proxies and fixes:
https://github.com/openwrt/telephony/issues/127
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
An upstream siproxd update was released after ~5 years, with bugfixes
and new features. This package supports the new plugins and their config
options, and updates required patches.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Use more conventional, clearer naming for config and registration files.
This includes having distinct directories and specific file suffixes.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Using the append_conf_if_set() function removes much repetitive and
error-prone code, reduces the source size by ~30%, and fixes a typo
previously uncaught.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
- Rename PYTHON_PKG_DIR to PYTHON_SITE_DIR, otherwise it's confusing.
- Remove the 'sed' hacks; handle the Python setup like the Perl setup is
already done.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- The builds currently fail with "undefined reference" errors. Fix that
by turning off Pulseaudio support. Also turn of Jack support in case
that gets detected in the future.
- aarch64 fails because this arch isn't recognized by the pocketsphinx
build system. Fix that by running autoreconf in the pocketsphinx build
dirs.
- Fix CFLAGS while we're here.
- Add dep on libsamplerate to mod_pocketsphinx. If it gets detected it
will be linked against, there is no switch to prevent that.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- add mod_perl and perl-esl.
- some patching is required to make this work.
- for the modules to find libperl, an rpath is needed, which currently
doesn't work because of an rstrip.sh/patchelf issue. Patch sent to
OpenWrt/LEDE devs (https://patchwork.ozlabs.org/patch/780008/)
- fix some more copts issues that became apparent with Perl enabled.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- add b64, clearmode, cv (broken), dahdi_codec, dialplan_directory,
event_test, event_zmq, pocketsphinx, posix_timer, random, vmd and yuv.
- some of the new modules require extra sources, so add a download
routine for those so we can verify the checksums and prevent FreeSWITCH
build system to download them on its own.
- add two patches to fix some issues with the new modules.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- compile fix for mod_av added, without it the build errors out
(warnings turned to errors). It's still labelled @BROKEN, but once
OpenWrt's ffmpeg maintainers add libavresample to libffmpeg-full
(PR #4490) it should work.
- disable Erlang detection if mod_erlang_event is not selected (build
dep on Erlang unfortunately has to stay)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- make the use of Python conditional and drop the build dep.
- change Python LDFLAGS to the ones suggested by host python-config.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Pull more packages into the misc group (timezones etc.)
- Change Misc generator to not force the misc handle onto packages
- Add possibility to Misc generator to tag packages as arch agnostic
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
The previous default logging level is completely silent, making normal
monitoring or troubleshooting impossible. Use the sane upstream default
for logging which captures basic startup, shutdown and error messages.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Support using standard interface names and make "lan"/"wan" the defaults
for inbound/outbound SIP traffic. This change makes siproxd more portable
but preserves backwards compatibility for upgrades.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
- removed xmlrpc-c todo; I compiled with external version in staging
dir, it didn't make a difference (didn't seem to be used)
- removed swig calls as per suggestion from upstream
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Moved location of example packages from /usr/share/freeswitch/conf to
/usr/share/freeswitch/examples. It makes more sense and is also the
place where the module configuration snippets go.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Some modules include example content, e.g. xml snippets, in their source
directory. Added a symbol that causes these to be included in the
packages.
Disabled by default.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- meant for packages where one only needs to copy files from one
directory to another
- added three new packages using the new builder (dev, fonts, images)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- fixed swig location in all Makefiles in libs/esl and src/mod/languages
- forced a reswig for mod_lua as well, like it is already done for
mod_python
- added patch for mod_lua to properly do the reswig (patch sent
upstream, too)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- if source dir exists install the destination dir as it might not exist
yet
- if source dir does not exist do nothing (not even error out)
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- mod_unimrcp picked up external apr/apr-util if found in the target
directory, which caused the build to fail (undefined references). Fixed
by adding the FreeSWITCH apr/apr-util lib dirs to the front of LDFLAGS.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- added sed scripts in order for mod_python to find the right lib to
link to
- fixed some whitespaces
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- removed $FS_STABLE_DEPS_BASE and $FS_STABLE_DEPS because they aren't
needed to setup dependencies
- changed dependency setups of modules, utils and python-esl so that
their dependencies don't leak to the main package
- fixed dep of mod-hiredis
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- removed python-setuptools build dep as it's not needed
- moved the Python autotools variables to CONFIGURE_VARS
- fixed host swig location
- changed from manually erasing files to force a reswig to calling the
swigclean make targets provided by upstream instead
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- reworded some bools in Config.in
- removed some notes in Makefile which seemed a bit out of touch
- forced parallel build off again, as some module combinations won't
allow it
- fixed modules.conf editing sed script to not uncomment lines
accidentally
- removed wrong dep on db47 for mod_db
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
As suggested by Jo I uncommented the big sound packs, but marked as
BROKEN, meaning they're still available for selection, but not built by
default.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Fixed sha256 checksums of some of the Russian language prompts
- Commented out non 8 kHz sound packs to not clog the mirrors
- Changed versioning scheme to the one used by upstream
- Made "Sounds" function params more generic
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Make sure that we properly pass down both TARGET_CPPFLAGS and
TARGET_LDFLAGS in order to fix build failures with external toolchains
that don't automatically search for headers and libraries in
$(STAGING_DIR).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- FreeSWITCH stable series for OpenWrt/LEDE
- clean, simple Makefiles
- provides 'freeswitch' user on target device, no need for root
- procd init script
- musl and glibc support
- SHA256 for download verification
- hotplug script with extras (condition checks)
- package size reduced
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Update to 0.5.0
Remove Speex as it's being obsoleted by upstream.
Add Opus to replace Speex
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Yate ships with a php script (banbrutes.php) which can help block brute
force login/password attacks. Since Yate for OpenWrt doesn't support
php scripts I've written a similar script in perl that's easier to use
with OpenWrt.
The script uses the iptables extension "recent" to keep track of
authentication failures and block users after too many authentication
failures.
This is an alternative to #87. The functionality is mostly the same,
but this is a slightly simplified, more light-weight version since
IP sets aren't used.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
pthread_key_create used to be called when a specific static key object was
initialized, but if another static object was initialized earlier and this
other object needed the key during its initialization yate would crash.
Fixes#99
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
Within this commit several modules has been added, such as:
* app_queue
* func_presencestate
Fixes within this commit adds several cfg files to basic
set of files and reduces used space by installing symlinks
(manually merged changes from pr #98 and from pr #103)
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Within this commit asterisk has been upgraded to version 11.22.0.
Several build issues has also been fixed (thanks to musl fixes from
Alpine linux).
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Within this commit asterisk has been upgraded to version 11.22.0.
Several build issues has also been fixed (thanks to musl fixes from
Alpine linux).
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
New Features in V4.2.3
- Warning about use of ancient gcc compiler
- New desktop/background images
- New AMI Function:SCCPShowRefcount
- Support for newer/future version of automake
- Small size reduction of chan_sccp.so
Bug Fixes
- Channel being left behind after hangup
- Scheduled Hangup / Schedule Digit Timeout
- Potential Deadlock Fallback Atomic Functions
- MWI loosing track of new voicemails under certain circumstances
- using gnu version of libiconv fixed
- gen_sccp_enum improved / gnu awk extension dependency removed
- set socket option should happen before binding to the socket
- channel monitor/record handling fixed
- Code cleanup / fixed memory leaks / fixed potential null pointer dereferences
- Some smaller patches (Check ChangeLog for details)
Yate.pm that is included in yate-scripts-perl uses perl package Data::Dumper
which is provided by openwrt package perlbase-data. Update dependency to
reflect this.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
echo.sh is a simple yate script which can be used to echo back audio to a
caller. It's useful for testing purposes.
Since the script is a basic shell script it has no specific dependencies.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
1. Removed PROCESS_SHARED locks check from libs/apr/configure.ac.
2. Flagged mod_flite as BROKEN due to lack of flite package.
3. Added some additional modules, i.e. mod_av, mod_esl, and flagged as BROKEN for now.
4. Depricated mod_celt.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Added an sqlite2 option for configure in apr-util
2. Moved bootstrap to Prepare stage.
3. Restructured patches directory to include CONFIG_LIBC
4. Fixed some modules dependency issues.
5. Reinstated mod_enum as not BROKEN.
6. Renamed mod_vp8 to mod_vpx according to FS changes.
7. Added some new modules and some are flagged as BROKEN.
i.e. mod_cv, mod_hiredis (BROKEN), mod_kazoo, mod_smpp (BROKEN)
8. Flagged some modules as BROKEN due to insufficient libraries.
i.e. mod_bv, mod_codec2, mod_fsv, mod_ilbc, mod_silk, mod_siren
9. Removed mod_snipe_hunt (depricated by FS)
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
- upgrade baresip to 0.4.14
- uuid module is now part of the core-baresip
- add building of dtmfio module
Signed-off-By: Alfred E. Heggestad <aeh@db.org>
Acked-by: Jiri Slachta <slachta@cesnet.cz>
Tested-by: Jiri Slachta <slachta@cesnet.cz>
Within this commit following issues has been fixed:
* app_directory has been added
* voicemail module has been split to res_adsi, res_smdi and voicemail
* res_calendar has been added
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Within this commit several modules were reworked and simplified.
* Voicemail module has been split to res-adsi, res-smdi and voicemail
module.
* app_confbridge has been split to atomic bridge modules
* res_calendar has been added
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Always include `sys/types.h` as it is basically required by anything besides
Glibc and uClibc. Fixes build against musl.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
- Add missing `sys/types.h` include to provide `u_short` type under musl
- Add missing `string.h` includes to avoid implicit function declarations
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
- error.h does not seem to be used (musl doesnt provide one)
fixes error/handling of FILE *stderr leading to errors like:
miax.c:217:2: error: assignment of read-only variable 'stderr'
stderr=fopen(log_output,"w");
thx to jow for pointing things out
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Github user @ljakob supplied a patch in
https://github.com/openwrt/telephony/issues/7
--
Hi, I've solved the problem myself - it was an endianness bug:
Here what gave me the correct clue:
audio is broken in one direction only
audio is fine if you disable any timing-source within asterisk (no good idea if you want to use IAX)
audio was fine on my x86 box
I had a long look into the code :)
The bug is in the audio handling of timing_write in channel.c, the data sent to the socket is not changed to the correct endianness if a timing device is used.
Here is my patch, it's untested (just one call yet) but it's trivial enough:
http://www.hugo.weite-welt.com/asterisk13_chan_dongle_endianess.patch
it is against asterisk13 branch in
https://github.com/oleg-krv/asterisk-chan-dongle.git
but should fit into other asterisk versions nicely
--
This commit imports the patch above to asterisk-11.x-chan-dongle.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The configure script generated by bootstrap.sh in the menuselect folder doesn't work properly. It doesn't check for 'sed', for instance, resulting in './configure: line 4622: -e: command not found'. The build works well without the bootstrap.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Updating configure-undef-res-ninit.patch in commit 2060702 changed
the resulting binaries on targets not previously failing to build
without the change. Bump the package release to reflect that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Lately configure is recreated from configure.ac. The current patch changes configure. So we patch it, then it gets recreated and our change is gone. So patch configure.ac instead. Without this change the build fails due to an undefined reference to res_nsearch.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Clean up asterisk-11.x package and fix host-tools (menuselect)
similar to how asterisk-13.x is built.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* update to 11.18.0
* GNU specific glob extenions are not availble on musl, don't
use them.
* PTHREAD_MUTEX_FAST_NP also isn't available, use fallback mutex
types instead.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
comment-out left-overs of broken GTalk support, so build no
longers breaks looking for libiksemel if SDK is set.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Asterisk's build-system tries to build against libneon on host if
headers are found. This is unintended and breaks the build.
Explicetely disable neon and neon29 detection to fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Asterisk's build-system tries to build against libneon on host if
headers are found. This is unintended and breaks the build.
Explicetely disable neon and neon29 detection to fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add the depensies for the chan_sip modul bacause chan_sip dos not function with out it.
Signed-off-by: Sven Pietack <redfox1977@users.noreply.github.com>
remove the chan_bridge.so depencies for copy file into packet. The so does not exists any more...
After apply the patch, the build process will work...
Signed-off-by: Sven Pietack <redfox1977@users.noreply.github.com>
Add the missing Confbridge and it brings the bridge_simple.so to activate the sip module.
Without the bridge_simple.so can not make calls via sip it.
Signed-off-by: redFOX1977 <redfox1977@users.noreply.github.com>
1. Update to FS Git HEAD 464d8ab91086715a2ec7eb1fb9a2d2cb53377eb7
2. Revert Config.in file to before GitHUB.
3. Revert dependency to libsrtp before GitHUB.
4. Add patch from Bluemax <bluemax@users.noreply.github.com> to libs/apr/configure.ac to disable TCP_NODELAY_WITH_CORK when cross compile.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
- Refrase subpackage descriptions
- Remove general description from the soundfiles subpackage and Refrase sound subpackage description
Signed-off-by: Diederik de Groot <ddegroot@talon.nl>
- Refrase subpackage descriptions
- Remove general description from the soundfiles subpackage and Refrase sound subpackage description
Signed-off-by: Diederik de Groot <ddegroot@talon.nl>
This commit deals with the update of kamailio to version 4.2.2 and
also fixes the mechanism for module inclusion. Instead of building
all modules by default only selected modules are built.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
1. Some platforms failed in configure process while checking for working
PROCESS_SHARED locks. Perhaps, this is caused by apr_cv_process_shared_works
variable set to yes in configure.ac file. This commit will set the
variable to no and see if configure process will pass such test.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. The included patched file (1130800-libs-srtp-configure-ac.patch) did
not seem to get pushed to the git server. Here we try again.
2. Update the patches/0000011-Makefile.am.patch file.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. restore missing ac_cv_dev_urandom=yes for sofia-sip to configure.ac
2. restore missing ac_cv_file___dev_urandom_=yes for srtp to configure.ac
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Add a silent-rules configure switch
2. Set its default setting to --disable-silent-rules
3. Set FS_WITH_ALSA default setting to enable.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Update MD5SUM on sounds-en-us-callie files.
2. Update patches.
3. Fix on spelling error.
4. Fix (minor) on LDFLAGS for perl.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Fix issue with perl package dependency.
2. Fix issue with building mod-erlang.
3. Suspend unused boot() function in files/freeswitch.init.
3. Add mod-bert.
4. Update sound/moh packages to v1.0.50
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Bump to version 1.5.14b with the FS git HEAD of
59cd3c77d84fac242683c5eb0b61c52f10bb2bb5
2. Remove mod-memcache due to lack of libmemcache support by OpenWRT.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Bump to FS GIT EHAD 5173471b06d88063ec7e2622c92c9674840ae4b1.
2. Flag mod_yaml as BROKEN.
3. Fine tune PKG_CONFIG_PATH to ${STAGING_DIR}/usr/lib/pkg-config .
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Fix no FS_WITH_SQLITE3 due to @DEVEL in Config.in
2. Fix configure error due to no ldns package needed by mod_enum.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
Bash shebang is changed to sh. Kamailio utils are modified to be compatible
with ash. Shell colouring is disabled in this change.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Bash shebang is changed to sh. Kamailio utils are modified to be compatible
with ash. Shell colouring is disabled in this change.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
1. Bump to git HEAD c411f8c7a99ea535bac661fb70676cebd1acfac5
2. Fix mod_celt.
3. Fix installation sed scripts.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Bump to git HEAD 3d5d8163b329f86aafed087815a51494ce50ce1a
2. Fix mod-erlang-event
3. Remove mod-speex
4. Add mod-rtc, mod-perl, and mod-verto. The last two modules depend
on perl target binary package which is currently omitted from
OpenWRT. As such, they are flagged as BROKEN.
5. Since FS no longer maintains and/or provides in-tree version of
portaudio library, both mod-portaudio and mod-portaudio-stream
are flagged as BROKEN.
6. Clean up and/or remove all staging paths from all libtool control
file names (.la).
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
Update asterisk-11.x. to version 11.10.2 to address CVE-2014-4046.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Update asterisk-1.8.x to version 1.8.28.2 to address CVE-2014-4047.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
1. Previous commit c009edf099
doesn't seem to update both the Makefile and Config.in
files.
2. Update to FS git HEAD 757b7440104e34cf57ab30a411e081470ce2e180
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Bump to git HEAD dc671d9d82e5ccdc5617f53c68c272c44a56b535
2. Fix mod-erlang-event
3. Add mod-basic, mod-cdr-mongodb, mod-memcached, and mod-mongo
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
added some core modules that are required for basic
operation:
account.so SIP account file parser
contact.so Contact list (address book)
menu.so Interactive menu
Signed-off-by: Alfred E. Heggestad <aeh@db.org>
[slachta@cesnet.cz: simplified patch]
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
spotted while looking through build-logs
only compile tested
asterisk-1.8.x uses OpenSSL instead of GnuTLS dunno about that
errors in log were:
configure: WARNING: unrecognized options:
--with-gnutls,
--without-curl,
--without-pbx-lua,
--without-gtk, --without-kde, --without-qt
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
- update to 11.7.0
- fix build for lantiq target - broken chan-lantiq status caused the
breakage of the whole asterisk package
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
1. Added the following switches:
--(with/without)-pgsql
--(enable/disable)-core-pgsql-pkgconfig
--(enable/disable)-srtp
--(enable/disable)-threads, and
--(enable/disable)-visibility
2. Added preliminary support for mod-xml-radius.
- requres freeradius-client package
3. Synched to FS git HEAD 40c105322193b7d0160814ed8ffcd5bf7f566944.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Reorganized configuration section into a file (Config.in) based
on suggestion from Luka (many thanks).
2. Synched opus to v1.0.3.
3. Synched to FS git HEAD c8be999c3446ffc8a4bbe10116855e542b29129e.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
FreeSWITCH: Synced to FS latest git HEAD and fixed dependency issue.
1. Synched to FS git HEAD 8ea0bc73a9e162504b8e0564f585cbfb5b39acfc.
3. Added libopenssl as dependency.
Signed-off-by: Mazi Lo <openwrt.mazilo@recursor.net>
1. Synched to FS git HEAD 1825b5bc89a315d42ef822da0b449886d298ffb6.
3. Added mod_format_cdr -- An XML CDR Module to files or curl.
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
1. Synched to FS git HEAD fb238ed99779b28eeb1cc839b033ea2cf9d03212.
2. Update some patched files.
3. Bumped to FS v1.5.6b.
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
Disabled UUID caused missing RTP stack in previous revision.
Module res_rtp_asterisk requires in asterisk11 uuid which is
needed for media transport.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
modules depend on PACKAGE_alsa-lib, and sync to FS latest git HEAD
1. Previous commit (c038dad49a) didn't
seem to fix this issue. Hopefully, this fix that partially
reverts previous commit will.
2. This commit also includes some minor adjusments to modules depend on
PACKAGE_alsa-lib.
3. Synched to FS git HEAD dbfde499a42b4f72eaf5578da2ebc741b85dedb3.
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
1. the main package size reduced by separating unneeded modules
2. refresh configure args, some of them were deprecated and unused
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
1. The FS libs/tiff package can make use of liblzma if avaialable. This
fix reverts commit bff1f87ad7. It
checks the CONFIG_PACKAGE_liblzma variable to determine liblzma
and will either pass --enable-lzma or --disable-lzma switch to
configure. For mod-spandsp, +liblzma:liblzma automatically sets
the liblzma dependency flag.
2. Synched to FS git HEAD d35db852a8bcc4fb10e7a8486046aabd45a7f9b2.
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
1. Removed +FS_WITH_LZMA:liblzma from call to BuildPlugin spandsp
package that causes a recursive dependency issue.
2. Synched to FS git HEAD 3bd139514993ffa9a4723df4136afa089f57b292.
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
git HEAD.
1. The issue was reported by Berni through trac ticket #13728
(https://dev.openwrt.org/ticket/13728).
2. Updated to FS git HEAD 3ec15cce68852fd4dba7336dd7a7a505d143a111
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
1. Added CONFIG_FS_WITH_LZMA var to pass --enable-lzma or
--disable-lzma switch to configure for libs/tiff package.
The switch is determined by the selection of liblzma
package.
2. Synch to FS git HEAD 4eee5aee8c94910f65f47ade4e873aa62e7117eb.
3. Patches refreshed.
Signed-off-by: Mazilo <openwrt.mazilo@recursor.net>
1. Updated to git HEAD 03dcbde8b4a5e2861b848fe6fc0ef04dd915939f
2. Fixed error messages for missing dependency of liblzma.so.5.
FS libs/tiff package auto detects liblzma. As such, when
liblzma is enabled/compiled, libs/tiff will be compiled
and linked to liblzma. As such, package like spandsp which
depends on libs/tiff will be flagged by OpenWRT during
packaging stage for a missing dependency of liblzma.so.5.
