OpenWrt Routing Packages
93efc5b8e1
Maintainer: Rob White rob@blue-wave.net Compile tested: All Run tested: arm_cortex-a7_neon-vfpv4, mipsel_24kc, x86-64, on 21.02.2 Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon dynamically checks configured parameters and sets them as required. This version does not require a Captive Portal to be running. Signed-off-by: Rob White <rob@blue-wave.net> |
||
|---|---|---|
| .github | ||
| ahcpd | ||
| alfred | ||
| babel-pinger | ||
| babeld | ||
| batctl | ||
| batman-adv | ||
| batmand | ||
| bird1 | ||
| bird1-openwrt | ||
| bird2 | ||
| bmx6 | ||
| bmx7 | ||
| cjdns | ||
| hnetd | ||
| luci-app-bmx6 | ||
| luci-app-cjdns | ||
| mcproxy | ||
| mesh11sd | ||
| minimalist-pcproxy | ||
| naywatch | ||
| ndppd | ||
| nodogsplash | ||
| ohybridproxy | ||
| olsrd | ||
| oonf-dlep-proxy | ||
| oonf-dlep-radio | ||
| oonf-init-scripts | ||
| oonf-olsrd2 | ||
| opennds | ||
| pimbd | ||
| prince | ||
| quagga | ||
| vis | ||
| MAINTAINERS | ||
| README.md | ||
OpenWrt Routing Feed
Description
This OpenWrt package feed contains community maintained routing packages.
Usage
This repository is intended to be layered on-top of an OpenWrt buildroot. If you do not have an OpenWrt buildroot installed, see the documentation at: OpenWrt Buildroot – Installation on the OpenWrt support site.
This feed is enabled by default. To install all its package definitions, run:
./scripts/feeds update routing
./scripts/feeds install -a -p routing