OpenWrt Routing Packages
4d62e08852
20 August 2019: babeld-1.9.1
* Fixed a crash that could happen when unicast and RTT estimation are
both enabled on an interface. Thanks to Dave Taht.
* Fixed compilation under BSD. Thanks to Dave Taht.
4 August 2019: babeld-1.9.0
* Reworked buffering of unicast packets to use a per-neighbour buffer
rather than a single buffer per interface. This makes unicast as
efficient as multicast, at the cost of slightly higher memory usage.
* Added option "unicast" that allows sending most TLVs over unicast.
This is necessary for the DTLS extension.
* Implemented parsing of unicast Hellos. This makes it possible to
interoperate with neighbours that only speak unicast (e.g. over some
kinds of tunnels that only do unicast).
* Implemented sending of unscheduled unicast Hellos. This makes the
RTT extension work over unicast too.
* Reworked the xroute data structures to use binary search and
linear-time comparison.
* Don't attempt to modify the rp_filter sysctl if it already has the
desired value; this makes it possible to run babeld in an
unpriviledged container. Thanks to Christof Schulze.
* Reinstated logging of late hellos. Thanks to Dave Taht.
* Don't send wildcard requests or Hellos to newish nodes. This makes
acquisition of new neighbours slower, but drastically reduces noise at
startup. Thanks to Teco Boot.
* Remove an arbitrary limit on the number of interfaces. Thanks to
Christof Schulze.
* Removed class E from martian filter. Thanks to Dave Taht.
* Added the ability to set the preferred source address in install filters.
Thanks to Killian Lufau.
* Fixed a number of read-only buffer overflows. Thanks to Leo Stefanesco.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
||
|---|---|---|
| ahcpd | ||
| alfred | ||
| babel-pinger | ||
| babeld | ||
| batctl | ||
| batman-adv | ||
| batmand | ||
| bird1 | ||
| bird1-openwrt | ||
| bird2 | ||
| bmx6 | ||
| bmx7 | ||
| cjdns | ||
| hnetd | ||
| luci-app-bmx6 | ||
| luci-app-cjdns | ||
| mcproxy | ||
| minimalist-pcproxy | ||
| mrd6 | ||
| ndppd | ||
| nodogsplash | ||
| ohybridproxy | ||
| olsrd | ||
| oonf-dlep-proxy | ||
| oonf-dlep-radio | ||
| oonf-init-scripts | ||
| oonf-olsrd2 | ||
| pimbd | ||
| prince | ||
| quagga | ||
| vis | ||
| MAINTAINERS | ||
| README | ||
This is an OpenWrt package feed containing community maintained routing packages. To use these packages, add the following line to the feeds.conf in the OpenWrt buildroot: src-git routing git://github.com/openwrt-routing/packages.git Update the feed: ./scripts/feeds update routing Activate the package: ./scripts/feeds install -a -p routing The routing packages should now appear in menuconfig.