bird: Move package to openwrt-routing feed.

Updated to latest version and fixed build errors.

bird/Makefile

@@ -0,0 +1,160 @@
+# 
+# Copyright (C) 2009-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bird
+PKG_VERSION:=1.3.11
+PKG_RELEASE:=1
+
+PKG_SOURCE:=bird-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=ftp://bird.network.cz/pub/bird
+PKG_MD5SUM:=8ad2eb997fb8251bc5b24cf32619571b
+PKG_BUILD_DEPENDS:=libncurses libreadline
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bird/Default
+  TITLE:=The BIRD Internet Routing Daemon
+  URL:=http://bird.network.cz/
+  DEPENDS:=
+endef
+
+define Package/birdc/Default
+  TITLE:=The BIRD command-line client
+  URL:=http://bird.network.cz/
+  DEPENDS:= +libreadline +libncurses
+endef
+
+define Package/bird/Default/description1
+BIRD is an internet routing daemon which manages TCP/IP routing tables
+with support of modern routing protocols, easy to use configuration
+interface and powerful route filtering language. It is lightweight and
+efficient and therefore appropriate for small embedded routers.
+
+endef
+
+define Package/bird/Default/description2
+In BGP, BIRD supports communities, multiprotocol extensions, MD5
+authentication, 32bit AS numbers and could act as a route server or a
+route reflector. BIRD also supports multiple RIBs, multiple kernel
+routing tables and redistribution between the protocols with a powerful
+configuration syntax.
+
+endef
+
+define Package/bird/Default/description3
+This is a BIRD command-line client. It is used to send commands to BIRD,
+commands can perform simple actions such as enabling/disabling of
+protocols, telling BIRD to show various information, telling it to show
+a routing table filtered by a filter, or asking BIRD to reconfigure.
+
+Unless you can't afford dependency on ncurses and readline, you
+should install BIRD command-line client together with BIRD.
+
+endef
+
+define Package/bird4
+$(call Package/bird/Default)
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=Routing and Redirection
+  TITLE+= (IPv4)
+endef
+
+define Package/birdc4
+$(call Package/birdc/Default)
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=Routing and Redirection
+  TITLE+= (IPv4)
+  DEPENDS+= +bird4
+endef
+
+define Package/bird6
+$(call Package/bird/Default)
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE+= (IPv6)
+endef
+
+define Package/birdc6
+$(call Package/birdc/Default)
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE+= (IPv6)
+  DEPENDS+= +bird6
+endef
+
+define Package/bird4/description
+$(call Package/bird/Default/description1)
+This is IPv4 version of BIRD, it supports OSPFv2, RIPv2 and BGP
+protocols.
+
+$(call Package/bird/Default/description2)
+endef
+
+define Package/birdc4/description
+$(call Package/bird/Default/description1)
+$(call Package/bird/Default/description3)
+endef
+
+define Package/bird6/description
+$(call Package/bird/Default/description1)
+This is IPv6 version of BIRD, it supports OSPFv3, RIPng and BGP
+protocols.
+
+$(call Package/bird/Default/description2)
+endef
+
+define Package/birdc6/description
+$(call Package/bird/Default/description1)
+$(call Package/bird/Default/description3)
+endef
+
+CONFIGURE_ARGS += --with-linux-headers="$(LINUX_DIR)"
+
+define Build/Template
+
+$(STAMP_BUILT)-$(2): $(STAMP_PREPARED)
+	$(call Build/Configure/Default,$(3))
+	$(call Build/Compile/Default,)
+	( cd $(PKG_BUILD_DIR); mv -f bird bird$(2); mv -f birdc birdc$(2) )
+	-$(MAKE) -C $(PKG_BUILD_DIR) clean
+	touch $$@
+
+$(STAMP_BUILT): $(STAMP_BUILT)-$(2)
+
+define Package/bird$(2)/install
+	$(INSTALL_DIR)  $$(1)/usr/sbin
+	$(INSTALL_BIN)  $$(PKG_BUILD_DIR)/bird$(2) $$(1)/usr/sbin/
+	$(INSTALL_BIN)  ./files/bird$(2)loop $$(1)/usr/sbin/
+	$(INSTALL_DIR)  $$(1)/etc
+	$(INSTALL_DATA) ./files/bird$(2).conf $$(1)/etc
+	$(INSTALL_DIR)  $$(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/bird$(2).init $$(1)/etc/init.d/bird$(2)
+
+endef
+
+define Package/bird$(2)/conffiles
+/etc/bird$(2).conf
+endef
+
+define Package/birdc$(2)/install
+	$(INSTALL_DIR) $$(1)/usr/sbin
+	$(INSTALL_BIN) $$(PKG_BUILD_DIR)/birdc$(2) $$(1)/usr/sbin/
+endef
+
+endef
+
+
+$(eval $(call Build/Template,bird4,4, --disable-ipv6))
+$(eval $(call Build/Template,bird6,6, --enable-ipv6))
+
+$(eval $(call BuildPackage,bird4))
+$(eval $(call BuildPackage,birdc4))
+$(eval $(call BuildPackage,bird6))
+$(eval $(call BuildPackage,birdc6))

bird/files/bird4.conf

@@ -0,0 +1,121 @@
+
+# THIS CONFIG FILE IS NOT A COMPLETE DOCUMENTATION
+# PLEASE LOOK IN THE BIRD DOCUMENTATION FOR MORE INFO
+
+# However, most of options used here are just for example
+# and will be removed in real-life configs.
+
+log syslog all;
+
+# Override router ID
+#router id 192.168.0.1;
+
+# Turn on global debugging of all protocols
+#debug protocols all;
+
+
+# Define a route filter...
+# filter test_filter {
+#	if net ~ 10.0.0.0/16 then accept;
+#	else reject;
+# }
+
+# The direct protocol automatically generates device routes to all network
+# interfaces. Can exist in as many instances as you wish if you want to
+# populate multiple routing tables with device routes. Because device routes
+# are handled by Linux kernel, this protocol is  usually not needed.
+# protocol direct {
+#	interface "*";	# Restrict network interfaces it works with
+# }
+
+# This pseudo-protocol performs synchronization between BIRD's routing
+# tables and the kernel. You can run multiple instances of the kernel
+# protocol and synchronize different kernel tables with different BIRD tables.
+protocol kernel {
+#	learn;			# Learn all alien routes from the kernel
+#	persist;		# Don't remove routes on bird shutdown
+	scan time 20;		# Scan kernel routing table every 20 seconds
+#	import none;		# Default is import all
+#	export all;		# Default is export none
+}
+
+# This pseudo-protocol watches all interface up/down events.
+protocol device {
+	scan time 10;		# Scan interfaces every 10 seconds
+}
+
+# Static routes (again, there can be multiple instances, so that you
+# can disable/enable various groups of static routes on the fly).
+protocol static {
+#	export all;		# Default is export none
+#	route 0.0.0.0/0 via 62.168.0.13;
+#	route 10.0.0.0/8 reject;
+#	route 192.168.0.0/16 reject;
+}
+
+
+#protocol rip {
+#	disabled;
+#	import all;
+#	export all;
+#	export filter test_filter;
+
+#	port 1520;
+#	period 7;
+#	infinity 16;
+#	garbage time 60;
+#	interface "*" { mode broadcast; };
+#	honor neighbor;
+#	honor always;
+#	honor never;
+#	authentication none;
+#}
+
+
+#protocol ospf {
+#	disabled;
+#	import all;
+#	export all;
+#	export where source = RTS_STATIC;
+
+#	area 0 {
+#		interface "eth*" {
+#			cost 10;
+#			hello 3;
+#			retransmit 2;
+#			wait 5;
+#			dead 20;
+#			type broadcast;
+#			authentication simple;
+#			password "pass";
+#		};
+#	};
+#}
+
+
+#protocol bgp {
+#	disabled;
+#	import all;
+#	export all;
+#	export where source = RTS_STATIC;
+
+#	local as 65000;
+#	neighbor 192.168.1.1 as 65001;
+#	multihop 20 via 192.168.2.1;
+
+#	hold time 240;
+#	startup hold time 240;
+#	connect retry time 120;
+#	keepalive time 80;	# defaults to hold time / 3
+#	start delay time 5;	# How long do we wait before initial connect
+#	error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
+#				# errors occur, we increase the delay exponentially ...
+#	error forget time 300;	# ... until this timeout expires)
+#	disable after error;	# Disable the protocol automatically when an error occurs
+#	next hop self;		# Disable next hop processing and always advertise our local address as nexthop
+#	source address 62.168.0.14;	# What local address we use for the TCP connection
+#	password "secret"	# Password used for MD5 authentication
+#	rr client;		# I am a route reflector and the neighor is my client
+#	rr cluster id 1.0.0.1	# Use this value for cluster id instead of my router id 
+#	};
+#}

bird/files/bird4.init

@@ -0,0 +1,24 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010-2011 OpenWrt.org
+
+START=99
+STOP=10
+
+SERVICE_DAEMONIZE=1
+SERVICE_WRITE_PID=1
+
+BIRD="/usr/sbin/bird4 -c /etc/bird4.conf"
+
+start() {
+	service_start $BIRD -d
+#	( SERVICE_MATCH_NAME=1 service_start /usr/sbin/bird4loop )
+}
+
+stop() {
+#	( SERVICE_MATCH_NAME=1 service_stop /usr/sbin/bird4loop )
+	service_stop $BIRD
+}
+
+reload() {
+	service_reload $BIRD
+}

bird/files/bird4loop

@@ -0,0 +1,24 @@
+#!/bin/sh
+
+BIRD="/usr/sbin/bird4 -c /etc/bird4.conf"
+
+$BIRD -p || return 1
+
+. /lib/functions.sh
+. /lib/functions/service.sh
+
+SERVICE_DAEMONIZE=1
+SERVICE_WRITE_PID=1
+
+sig_handler() {
+	running=0
+	service_stop $BIRD
+}
+
+running=1
+trap sig_handler INT
+trap sig_handler TERM
+while [ $running -gt 0 ]; do
+	service_check $BIRD || service_start $BIRD -d "$@"
+	sleep 3
+done

bird/files/bird6.conf

@@ -0,0 +1,121 @@
+
+# THIS CONFIG FILE IS NOT A COMPLETE DOCUMENTATION
+# PLEASE LOOK IN THE BIRD DOCUMENTATION FOR MORE INFO
+
+# However, most of options used here are just for example
+# and will be removed in real-life configs.
+
+log syslog all;
+
+# Override router ID
+#router id 192.168.0.1;
+
+# Turn on global debugging of all protocols
+#debug protocols all;
+
+
+# Define a route filter...
+# filter test_filter {
+#	if net ~ 10.0.0.0/16 then accept;
+#	else reject;
+# }
+
+# The direct protocol automatically generates device routes to all network
+# interfaces. Can exist in as many instances as you wish if you want to
+# populate multiple routing tables with device routes. Because device routes
+# are handled by Linux kernel, this protocol is  usually not needed.
+# protocol direct {
+#	interface "*";	# Restrict network interfaces it works with
+# }
+
+# This pseudo-protocol performs synchronization between BIRD's routing
+# tables and the kernel. You can run multiple instances of the kernel
+# protocol and synchronize different kernel tables with different BIRD tables.
+protocol kernel {
+#	learn;			# Learn all alien routes from the kernel
+#	persist;		# Don't remove routes on bird shutdown
+	scan time 20;		# Scan kernel routing table every 20 seconds
+#	import none;		# Default is import all
+#	export all;		# Default is export none
+}
+
+# This pseudo-protocol watches all interface up/down events.
+protocol device {
+	scan time 10;		# Scan interfaces every 10 seconds
+}
+
+# Static routes (again, there can be multiple instances, so that you
+# can disable/enable various groups of static routes on the fly).
+protocol static {
+#	export all;		# Default is export none
+#	route 0.0.0.0/0 via 62.168.0.13;
+#	route 10.0.0.0/8 reject;
+#	route 192.168.0.0/16 reject;
+}
+
+
+#protocol rip {
+#	disabled;
+#	import all;
+#	export all;
+#	export filter test_filter;
+
+#	port 1520;
+#	period 7;
+#	infinity 16;
+#	garbage time 60;
+#	interface "*" { mode broadcast; };
+#	honor neighbor;
+#	honor always;
+#	honor never;
+#	authentication none;
+#}
+
+
+#protocol ospf {
+#	disabled;
+#	import all;
+#	export all;
+#	export where source = RTS_STATIC;
+
+#	area 0 {
+#		interface "eth*" {
+#			cost 10;
+#			hello 3;
+#			retransmit 2;
+#			wait 5;
+#			dead 20;
+#			type broadcast;
+#			authentication simple;
+#			password "pass";
+#		};
+#	};
+#}
+
+
+#protocol bgp {
+#	disabled;
+#	import all;
+#	export all;
+#	export where source = RTS_STATIC;
+
+#	local as 65000;
+#	neighbor 192.168.1.1 as 65001;
+#	multihop 20 via 192.168.2.1;
+
+#	hold time 240;
+#	startup hold time 240;
+#	connect retry time 120;
+#	keepalive time 80;	# defaults to hold time / 3
+#	start delay time 5;	# How long do we wait before initial connect
+#	error wait time 60, 300;# Minimum and maximum time we wait after an error (when consecutive
+#				# errors occur, we increase the delay exponentially ...
+#	error forget time 300;	# ... until this timeout expires)
+#	disable after error;	# Disable the protocol automatically when an error occurs
+#	next hop self;		# Disable next hop processing and always advertise our local address as nexthop
+#	source address 62.168.0.14;	# What local address we use for the TCP connection
+#	password "secret"	# Password used for MD5 authentication
+#	rr client;		# I am a route reflector and the neighor is my client
+#	rr cluster id 1.0.0.1	# Use this value for cluster id instead of my router id 
+#	};
+#}

bird/files/bird6.init

@@ -0,0 +1,24 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010-2011 OpenWrt.org
+
+START=99
+STOP=10
+
+SERVICE_DAEMONIZE=1
+SERVICE_WRITE_PID=1
+
+BIRD="/usr/sbin/bird6 -c /etc/bird6.conf"
+
+start() {
+	service_start $BIRD -d
+#	( SERVICE_MATCH_NAME=1 service_start /usr/sbin/bird6loop )
+}
+
+stop() {
+#	( SERVICE_MATCH_NAME=1 service_stop /usr/sbin/bird6loop )
+	service_stop $BIRD
+}
+
+reload() {
+	service_reload $BIRD
+}

bird/files/bird6loop

@@ -0,0 +1,24 @@
+#!/bin/sh
+
+BIRD="/usr/sbin/bird6 -c /etc/bird6.conf"
+
+$BIRD -p || return 1
+
+. /lib/functions.sh
+. /lib/functions/service.sh
+
+SERVICE_DAEMONIZE=1
+SERVICE_WRITE_PID=1
+
+sig_handler() {
+	running=0
+	service_stop $BIRD
+}
+
+running=1
+trap sig_handler INT
+trap sig_handler TERM
+while [ $running -gt 0 ]; do
+	service_check $BIRD || service_start $BIRD -d "$@"
+	sleep 3
+done