Difuse/packages
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
packages/net/modemmanager/files/modemmanager.proto
Aleksander Morgado c15e94f6c5 modemmanager: explicitly disconnect even if no bearers found 
A network restart where netifd is cleanly restarted involves bringing
the network interfaces down. The 'modemmanager' protocol handler will
run a mmcli --simple-disconnect in this case, but only if there are
bearer objects found.

If the network restart happened *during* the connection attempt
procedure, while the modem is e.g. being registered in the network, no
bearer objects exist yet, and so, we would skip doing anything during
the interface teardown operation. This would lead to the original
connection attempt succeeding, so leaving the modem in ModemManager
in connected state, while the associated interface in netifd is
reported down.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
2022-07-05 21:59:51 -07:00

551 lines
17 KiB
Protocol Buffer
Executable file
Raw Blame History

#!/bin/sh
# Copyright (C) 2016-2019 Aleksander Morgado <aleksander@aleksander.es>
[ -x /usr/bin/mmcli ] || exit 0
[ -x /usr/sbin/pppd ] || exit 0
[ -n "$INCLUDE_ONLY" ] || {
. /lib/functions.sh
. ../netifd-proto.sh
. ./ppp.sh
init_proto "$@"
}
cdr2mask ()
{
# Number of args to shift, 255..255, first non-255 byte, zeroes
set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
if [ "$1" -gt 1 ]
then
shift "$1"
else
shift
fi
echo "${1-0}"."${2-0}"."${3-0}"."${4-0}"
}
# This method expects as first argument a list of key-value pairs, as returned by mmcli --output-keyvalue
# The second argument must be exactly the name of the field to read
#
# Sample output:
# $ mmcli -m 0 -K
# modem.dbus-path : /org/freedesktop/ModemManager1/Modem/0
# modem.generic.device-identifier : ed6eff2e3e0f90463da1c2a755b2acacd1335752
# modem.generic.manufacturer : Dell Inc.
# modem.generic.model : DW5821e Snapdragon X20 LTE
# modem.generic.revision : T77W968.F1.0.0.4.0.GC.009\n026
# modem.generic.carrier-configuration : GCF
# modem.generic.carrier-configuration-revision : 08E00009
# modem.generic.hardware-revision : DW5821e Snapdragon X20 LTE
# ....
modemmanager_get_field() {
local list=$1
local field=$2
local value=""
[ -z "${list}" ] || [ -z "${field}" ] && return
# there is always at least a whitespace after each key, and we use that as part of the
# key matching we do (e.g. to avoid getting 'modem.generic.state-failed-reason' as a result
# when grepping for 'modem.generic.state'.
line=$(echo "${list}" | grep "${field} ")
value=$(echo ${line#*:})
# not found?
[ -n "${value}" ] || return 2
# only print value if set
[ "${value}" != "--" ] && echo "${value}"
return 0
}
# build a comma-separated list of values from the list
modemmanager_get_multivalue_field() {
local list=$1
local field=$2
local value=""
local length idx item
[ -z "${list}" ] || [ -z "${field}" ] && return
length=$(modemmanager_get_field "${list}" "${field}.length")
[ -n "${length}" ] || return 0
[ "$length" -ge 1 ] || return 0
idx=1
while [ $idx -le "$length" ]; do
item=$(modemmanager_get_field "${list}" "${field}.value\[$idx\]")
[ -n "${item}" ] && [ "${item}" != "--" ] && {
[ -n "${value}" ] && value="${value}, "
value="${value}${item}"
}
idx=$((idx + 1))
done
# nothing built?
[ -n "${value}" ] || return 2
# only print value if set
echo "${value}"
return 0
}
modemmanager_cleanup_connection() {
local modemstatus="$1"
local bearercount idx bearerpath
bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
# do nothing if no bearers reported
[ -n "${bearercount}" ] && [ "$bearercount" -ge 1 ] && {
# explicitly disconnect just in case
mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
# and remove all bearer objects, if any found
idx=1
while [ $idx -le "$bearercount" ]; do
bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[$idx\]")
mmcli --modem "${device}" --delete-bearer="${bearerpath}" >/dev/null 2>&1
idx=$((idx + 1))
done
}
}
modemmanager_connected_method_ppp_ipv4() {
local interface="$1"
local ttyname="$2"
local username="$3"
local password="$4"
local allowedauth="$5"
# all auth types are allowed unless a user given list is given
local authopts
local pap=1
local chap=1
local mschap=1
local mschapv2=1
local eap=1
[ -n "$allowedauth" ] && {
pap=0 chap=0 mschap=0 mschapv2=0 eap=0
for auth in $allowedauth; do
case $auth in
"pap") pap=1 ;;
"chap") chap=1 ;;
"mschap") mschap=1 ;;
"mschapv2") mschapv2=1 ;;
"eap") eap=1 ;;
*) ;;
esac
done
}
[ $pap -eq 1 ] || append authopts "refuse-pap"
[ $chap -eq 1 ] || append authopts "refuse-chap"
[ $mschap -eq 1 ] || append authopts "refuse-mschap"
[ $mschapv2 -eq 1 ] || append authopts "refuse-mschap-v2"
[ $eap -eq 1 ] || append authopts "refuse-eap"
proto_run_command "${interface}" /usr/sbin/pppd \
"${ttyname}" \
115200 \
nodetach \
noaccomp \
nobsdcomp \
nopcomp \
novj \
noauth \
$authopts \
${username:+ user $username} \
${password:+ password $password} \
lcp-echo-failure 5 \
lcp-echo-interval 15 \
lock \
crtscts \
nodefaultroute \
usepeerdns \
ipparam "${interface}" \
ip-up-script /lib/netifd/ppp-up \
ip-down-script /lib/netifd/ppp-down
}
modemmanager_disconnected_method_ppp_ipv4() {
local interface="$1"
echo "running disconnection (ppp method)"
[ -n "${ERROR}" ] && {
local errorstring
errorstring=$(ppp_exitcode_tostring "${ERROR}")
case "$ERROR" in
0)
;;
2)
proto_notify_error "$interface" "$errorstring"
proto_block_restart "$interface"
;;
*)
proto_notify_error "$interface" "$errorstring"
;;
esac
} || echo "pppd result code not given"
proto_kill_command "$interface"
}
modemmanager_connected_method_dhcp_ipv4() {
local interface="$1"
local wwan="$2"
local metric="$3"
proto_init_update "${wwan}" 1
proto_set_keep 1
proto_send_update "${interface}"
json_init
json_add_string name "${interface}_4"
json_add_string ifname "@${interface}"
json_add_string proto "dhcp"
proto_add_dynamic_defaults
[ -n "$metric" ] && json_add_int metric "${metric}"
json_close_object
ubus call network add_dynamic "$(json_dump)"
}
modemmanager_connected_method_static_ipv4() {
local interface="$1"
local wwan="$2"
local address="$3"
local prefix="$4"
local gateway="$5"
local mtu="$6"
local dns1="$7"
local dns2="$8"
local metric="$9"
local mask=""
[ -n "${address}" ] || {
proto_notify_error "${interface}" ADDRESS_MISSING
return
}
[ -n "${prefix}" ] || {
proto_notify_error "${interface}" PREFIX_MISSING
return
}
mask=$(cdr2mask "${prefix}")
[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
proto_init_update "${wwan}" 1
proto_set_keep 1
echo "adding IPv4 address ${address}, netmask ${mask}"
proto_add_ipv4_address "${address}" "${mask}"
[ -n "${gateway}" ] && {
echo "adding default IPv4 route via ${gateway}"
proto_add_ipv4_route "0.0.0.0" "0" "${gateway}" "${address}"
}
[ -n "${dns1}" ] && {
echo "adding primary DNS at ${dns1}"
proto_add_dns_server "${dns1}"
}
[ -n "${dns2}" ] && {
echo "adding secondary DNS at ${dns2}"
proto_add_dns_server "${dns2}"
}
[ -n "$metric" ] && json_add_int metric "${metric}"
proto_send_update "${interface}"
}
modemmanager_connected_method_dhcp_ipv6() {
local interface="$1"
local wwan="$2"
local metric="$3"
proto_init_update "${wwan}" 1
proto_set_keep 1
proto_send_update "${interface}"
json_init
json_add_string name "${interface}_6"
json_add_string ifname "@${interface}"
json_add_string proto "dhcpv6"
proto_add_dynamic_defaults
json_add_string extendprefix 1 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
[ -n "$metric" ] && json_add_int metric "${metric}"
json_close_object
ubus call network add_dynamic "$(json_dump)"
}
modemmanager_connected_method_static_ipv6() {
local interface="$1"
local wwan="$2"
local address="$3"
local prefix="$4"
local gateway="$5"
local mtu="$6"
local dns1="$7"
local dns2="$8"
local metric="$9"
[ -n "${address}" ] || {
proto_notify_error "${interface}" ADDRESS_MISSING
return
}
[ -n "${prefix}" ] || {
proto_notify_error "${interface}" PREFIX_MISSING
return
}
[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
proto_init_update "${wwan}" 1
proto_set_keep 1
echo "adding IPv6 address ${address}, prefix ${prefix}"
proto_add_ipv6_address "${address}" "128"
proto_add_ipv6_prefix "${address}/${prefix}"
[ -n "${gateway}" ] && {
echo "adding default IPv6 route via ${gateway}"
proto_add_ipv6_route "${gateway}" "128"
proto_add_ipv6_route "::0" "0" "${gateway}" "" "" "${address}/${prefix}"
}
[ -n "${dns1}" ] && {
echo "adding primary DNS at ${dns1}"
proto_add_dns_server "${dns1}"
}
[ -n "${dns2}" ] && {
echo "adding secondary DNS at ${dns2}"
proto_add_dns_server "${dns2}"
}
[ -n "$metric" ] && json_add_int metric "${metric}"
proto_send_update "${interface}"
}
modemmanager_disconnected_method_common() {
local interface="$1"
echo "running disconnection (common)"
proto_notify_error "${interface}" MM_DISCONNECT_IN_PROGRESS
proto_init_update "*" 0
proto_send_update "${interface}"
}
proto_modemmanager_init_config() {
available=1
no_device=1
proto_config_add_string device
proto_config_add_string apn
proto_config_add_string 'allowedauth:list(string)'
proto_config_add_string username
proto_config_add_string password
proto_config_add_string pincode
proto_config_add_string iptype
proto_config_add_int signalrate
proto_config_add_boolean lowpower
proto_config_add_defaults
}
proto_modemmanager_setup() {
local interface="$1"
local modempath modemstatus bearercount bearerpath connectargs bearerstatus beareriface
local bearermethod_ipv4 bearermethod_ipv6 auth cliauth
local operatorname operatorid registration accesstech signalquality
local device apn allowedauth username password pincode iptype metric signalrate
local address prefix gateway mtu dns1 dns2
json_get_vars device apn allowedauth username password pincode iptype metric signalrate
# validate sysfs path given in config
[ -n "${device}" ] || {
echo "No device specified"
proto_notify_error "${interface}" NO_DEVICE
proto_set_available "${interface}" 0
return 1
}
[ -e "${device}" ] || {
echo "Device not found in sysfs"
proto_set_available "${interface}" 0
return 1
}
# validate that ModemManager is handling the modem at the sysfs path
modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
modempath=$(modemmanager_get_field "${modemstatus}" "modem.dbus-path")
[ -n "${modempath}" ] || {
echo "Device not managed by ModemManager"
proto_notify_error "${interface}" DEVICE_NOT_MANAGED
proto_set_available "${interface}" 0
return 1
}
echo "modem available at ${modempath}"
# always cleanup before attempting a new connection, just in case
modemmanager_cleanup_connection "${modemstatus}"
# if allowedauth list given, build option string
for auth in $allowedauth; do
cliauth="${cliauth}${cliauth:+|}$auth"
done
# setup connect args; APN mandatory (even if it may be empty)
echo "starting connection with apn '${apn}'..."
proto_notify_error "${interface}" MM_CONNECT_IN_PROGRESS
connectargs="apn=${apn}${iptype:+,ip-type=${iptype}}${cliauth:+,allowed-auth=${cliauth}}${username:+,user=${username}}${password:+,password=${password}}${pincode:+,pin=${pincode}}"
mmcli --modem="${device}" --timeout 120 --simple-connect="${connectargs}" || {
proto_notify_error "${interface}" MM_CONNECT_FAILED
proto_block_restart "${interface}"
return 1
}
# check if Signal refresh rate is set
if [ -n "${signalrate}" ] && [ "${signalrate}" -eq "${signalrate}" ] 2>/dev/null; then
echo "setting signal refresh rate to ${signalrate} seconds"
mmcli --modem="${device}" --signal-setup="${signalrate}"
else
echo "signal refresh rate is not set"
fi
# log additional useful information
modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
operatorname=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-name")
[ -n "${operatorname}" ] && echo "network operator name: ${operatorname}"
operatorid=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-code")
[ -n "${operatorid}" ] && echo "network operator MCCMNC: ${operatorid}"
registration=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.registration-state")
[ -n "${registration}" ] && echo "registration type: ${registration}"
accesstech=$(modemmanager_get_multivalue_field "${modemstatus}" "modem.generic.access-technologies")
[ -n "${accesstech}" ] && echo "access technology: ${accesstech}"
signalquality=$(modemmanager_get_field "${modemstatus}" "modem.generic.signal-quality.value")
[ -n "${signalquality}" ] && echo "signal quality: ${signalquality}%"
# we won't like it if there are more than one bearers, as that would mean the
# user manually created them, and that's unsupported by this proto
bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
[ -n "${bearercount}" ] && [ "$bearercount" -eq 1 ] || {
proto_notify_error "${interface}" INVALID_BEARER_LIST
return 1
}
# load connected bearer information
bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
# load network interface and method information
beareriface=$(modemmanager_get_field "${bearerstatus}" "bearer.status.interface")
bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
# setup IPv4
[ -n "${bearermethod_ipv4}" ] && {
echo "IPv4 connection setup required in interface ${interface}: ${bearermethod_ipv4}"
case "${bearermethod_ipv4}" in
"dhcp")
modemmanager_connected_method_dhcp_ipv4 "${interface}" "${beareriface}" "${metric}"
;;
"static")
address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.address")
prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.prefix")
gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.gateway")
mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.mtu")
dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[1\]")
dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[2\]")
modemmanager_connected_method_static_ipv4 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}"
;;
"ppp")
modemmanager_connected_method_ppp_ipv4 "${interface}" "${beareriface}" "${username}" "${password}" "${allowedauth}"
;;
*)
proto_notify_error "${interface}" UNKNOWN_METHOD
return 1
;;
esac
}
# setup IPv6
# note: if using ipv4v6, both IPv4 and IPv6 settings will have the same MTU and metric values reported
[ -n "${bearermethod_ipv6}" ] && {
echo "IPv6 connection setup required in interface ${interface}: ${bearermethod_ipv6}"
case "${bearermethod_ipv6}" in
"dhcp")
modemmanager_connected_method_dhcp_ipv6 "${interface}" "${beareriface}" "${metric}"
;;
"static")
address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.address")
prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.prefix")
gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.gateway")
mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.mtu")
dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[1\]")
dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[2\]")
modemmanager_connected_method_static_ipv6 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}"
;;
"ppp")
proto_notify_error "${interface}" "unsupported method"
return 1
;;
*)
proto_notify_error "${interface}" UNKNOWN_METHOD
return 1
;;
esac
}
return 0
}
proto_modemmanager_teardown() {
local interface="$1"
local modemstatus bearerpath errorstring
local bearermethod_ipv4 bearermethod_ipv6
local device lowpower iptype
json_get_vars device lowpower iptype
echo "stopping network"
proto_notify_error "${interface}" MM_TEARDOWN_IN_PROGRESS
# load connected bearer information, just the first one should be ok
modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
[ -n "${bearerpath}" ] || {
echo "couldn't load bearer path: disconnecting anyway"
mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
return
}
# load bearer connection methods
bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
[ -n "${bearermethod_ipv4}" ] &&
echo "IPv4 connection teardown required in interface ${interface}: ${bearermethod_ipv4}"
bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
[ -n "${bearermethod_ipv6}" ] &&
echo "IPv6 connection teardown required in interface ${interface}: ${bearermethod_ipv6}"
# disconnection handling only requires special treatment in IPv4/PPP
[ "${bearermethod_ipv4}" = "ppp" ] && modemmanager_disconnected_method_ppp_ipv4 "${interface}"
modemmanager_disconnected_method_common "${interface}"
# disconnect
mmcli --modem="${device}" --simple-disconnect ||
proto_notify_error "${interface}" DISCONNECT_FAILED
# disable
mmcli --modem="${device}" --disable
proto_notify_error "${interface}" MM_MODEM_DISABLED
# low power, only if requested
[ "${lowpower:-0}" -lt 1 ] ||
mmcli --modem="${device}" --set-power-state-low
}
[ -n "$INCLUDE_ONLY" ] || {
add_protocol modemmanager
}
Reference in a new issue View git blame Copy permalink