Difuse/packages
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
packages/net/openvswitch/Makefile
Yousong Zhou 52e074411b openvswitch: only libopenvswitch depends on libunbound, libunwind 
This is to make explicit the conditional select of libunwind is only
needed for libopenvswitch.  If we spill it over other packages, the
generated kconfig will have recursive dependency issue.  2 new patches
were made for this goal

The other thing is that "+libunwind" will cause it to be built if any of the
packages defined in this Makefile is enabled (y or m).  This is at the moment
by-design of the build system.

Libunwind does not support architectures like arc.  Use conditional select To
avoid (libunwind) build failures like the following,

  checking for ELF helper width... configure: error: Unknown ELF target: arc
  make[3]: *** [Makefile:65: /data/openwrt/build_dir/target-arc_arc700_uClibc/
  libunwind-1.3.1/.configured_68b329da9893e34099c7d8ad5cb9c940] Error 1

Things like "+PACKAGE_openvswitch-libopenvswitch:libunwind" will also result in
recursive deps error for chains of 3 nodes.  Kconfig construct like the
following will be made

	config A
		tristate
		select B
		depends on !(C) || (x)

	config B
		tristate
		select C

	config C
		tristate

	config x
		bool

Other changes include

 - Shared use of variable ovs__common_depends was removed
 - Ovn doc build was patched out

Link: https://github.com/openwrt/packages/pull/12959#issuecomment-665021413
Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-07-30 10:02:13 +08:00

291 lines
11 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2013 Julius Schulz-Zander <julius@net.t-labs.tu-berlin.de>
# Copyright (C) 2014-2017 OpenWrt.org
# Copyright (C) 2018-2020 Yousong Zhou <yszhou4tech@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
include ./openvswitch.mk
# Checklist on version bump
#
# - Check acinclude.m4 for range of supported kernel versions: "but version newer than .* is not supported"
# - Check and update kmod dependencies when necessary (runtime module load check in the least)
#
PKG_NAME:=openvswitch
PKG_VERSION:=$(ovs_version)
PKG_RELEASE:=8
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=https://www.openvswitch.org/releases/
PKG_HASH:=dd5f727427e36cab22bdeae61529d8c8fccacc53d968cfa7658f7f935ddda531
PKG_LICENSE:=Apache-2.0
PKG_LICENSE_FILES:=LICENSE
PKG_CPE_ID:=cpe:/a:openvswitch:openvswitch
PKG_BUILD_DIR:=$(ovs_builddir)
PKG_BUILD_DEPENDS+=python3/host python-six/host
PKG_USE_MIPS16:=0
PKG_BUILD_PARALLEL:=1
PKG_FIXUP:=autoreconf
PKG_INSTALL:=1
PYTHON3_PKG_BUILD:=0
PKG_MAINTAINER:=Yousong Zhou <yszhou4tech@gmail.com>
include $(INCLUDE_DIR)/package.mk
include ../../lang/python/python3-host.mk
include ../../lang/python/python3-package.mk
ovs_kmod_packages:=
ovs_kmod_intree_kernel_patchver_min:=3.10
ovs_kmod_intree_kernel_patchver_max:=5.0
ovs_kmod_intree_not_supported:=$(strip $(call kernel_patchver_lt,$(ovs_kmod_intree_kernel_patchver_min))$(call kernel_patchver_gt,$(ovs_kmod_intree_kernel_patchver_max)))
ovs_kmod_intree_dir:=$(PKG_BUILD_DIR)/datapath/linux
ovs_kmod_upstream_dir:=$(LINUX_DIR)/net/openvswitch
ovs_kmod_package_name=$(if $(filter openvswitch,$(1)),openvswitch,$(1))
ovs_kmod_is_intree=$(filter %-intree,$(1))
ovs_kmod_upstream_name=kmod-$(call ovs_kmod_package_name,$(patsubst %-intree,%,$(1)))
ovs_kmod_package_provides=$(call ovs_kmod_upstream_name,$(1))
define OvsKmodPackageTemplate
ifeq ($(if $(call ovs_kmod_is_intree,$(1)),$(ovs_kmod_intree_not_supported)),)
define KernelPackage/$(call ovs_kmod_package_name,$(1))
SECTION:=kernel
CATEGORY:=Kernel modules
SUBMENU:=Network Support
TITLE:=$(ovs_kmod_$(1)_title)
DEPENDS:=$(ovs_kmod_$(1)_depends) $(if $(call ovs_kmod_is_intree,$(1)),@IPV6 @DEVEL)
PROVIDES:=$(call ovs_kmod_package_provides,$(1))
KCONFIG:=$(ovs_kmod_$(1)_kconfig)
FILES:=$(ovs_kmod_$(1)_files)
AUTOLOAD:=$(call AutoProbe,$(foreach m,$(ovs_kmod_$(1)_files),$(notdir $(patsubst %.ko,%,$(basename $(m))))))
endef
ovs_kmod_packages+=$(call ovs_kmod_package_name,$(1))
endif
endef
ovs_kmod_openvswitch_title:=Open vSwitch kernel datapath (upstream)
ovs_kmod_openvswitch_kconfig:=CONFIG_OPENVSWITCH
ovs_kmod_openvswitch_depends:=\
+kmod-lib-crc32c \
+kmod-nf-nat \
+IPV6:kmod-nf-nat6 \
+kmod-nf-conntrack \
+IPV6:kmod-nf-conntrack6 \
+(!LINUX_4_9&&!LINUX_4_14):kmod-nsh \
+(!LINUX_4_9&&!LINUX_4_14):kmod-ipt-conntrack-extra \
ovs_kmod_openvswitch_files:=$(ovs_kmod_upstream_dir)/openvswitch.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch))
ovs_kmod_openvswitch-gre_title:=Open vSwitch GRE tunneling support (upstream)
ovs_kmod_openvswitch-gre_kconfig:= CONFIG_OPENVSWITCH_GRE
ovs_kmod_openvswitch-gre_depends:= +kmod-openvswitch +kmod-gre
ovs_kmod_openvswitch-gre_files:= $(ovs_kmod_upstream_dir)/vport-gre.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-gre))
ovs_kmod_openvswitch-vxlan_title:=Open vSwitch VXLAN tunneling support (upstream)
ovs_kmod_openvswitch-vxlan_kconfig:= CONFIG_OPENVSWITCH_VXLAN
ovs_kmod_openvswitch-vxlan_depends:= +kmod-openvswitch +kmod-vxlan
ovs_kmod_openvswitch-vxlan_files:= $(ovs_kmod_upstream_dir)/vport-vxlan.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-vxlan))
ovs_kmod_openvswitch-geneve_title:=Open vSwitch Geneve tunneling support (upstream)
ovs_kmod_openvswitch-geneve_kconfig:= CONFIG_OPENVSWITCH_GENEVE
ovs_kmod_openvswitch-geneve_depends:= +kmod-openvswitch +kmod-geneve
ovs_kmod_openvswitch-geneve_files:= $(ovs_kmod_upstream_dir)/vport-geneve.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-geneve))
# NOTE depends
#
# - kmod-gre: with linux-4.14, ovs-2.10, when ovs decides to not
# USE_UPSTREAM_TUNNEL, it requires kmod-gre to be enabled so that
# CONFIG_NET_IPGRE_DEMUX is enabled and ovs will have rpl_gre_init()
# compiled in.
#
# - kmod-gre6: with linux-4.14, ovs-2.10, when ovs decides to not
# USE_UPSTREAM_TUNNEL, it requires xfrm6_tunnel_register() from
# net/ipv6/tunnel6.ko, which will be pulled in by kmod-ip6-tunnel, which
# will be pulled in by kmod-gre6. NOTE that tunnel6.ko itself cannot be
# enabled and selected on its own
#
# - kmod-ipt-conntrack-extra: required for nf_conncount.ko
#
ovs_kmod_openvswitch-intree_title:=Open vSwitch kernel datapath (in tree)
ovs_kmod_openvswitch-intree_depends:=\
+kmod-lib-crc32c \
+kmod-nf-nat \
+IPV6:kmod-nf-nat6 \
+kmod-nf-conntrack \
+(IPV6&&(LINUX_4_9||LINUX_4_14)):kmod-nf-conntrack6 \
+(LINUX_4_9||LINUX_4_14):kmod-gre \
+(IPV6&&(LINUX_4_9||LINUX_4_14)):kmod-gre6 \
+(!LINUX_4_9&&!LINUX_4_14):kmod-udptunnel4 \
+(!LINUX_4_9&&!LINUX_4_14):kmod-ipt-conntrack-extra \
ovs_kmod_openvswitch-intree_files:= $(ovs_kmod_intree_dir)/openvswitch.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-intree))
ovs_kmod_openvswitch-gre-intree_title:=Open vSwitch GRE tunneling support (in tree)
ovs_kmod_openvswitch-gre-intree_depends:= +kmod-openvswitch-intree +kmod-gre
ovs_kmod_openvswitch-gre-intree_files:= $(ovs_kmod_intree_dir)/vport-gre.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-gre-intree))
ovs_kmod_openvswitch-vxlan-intree_title:=Open vSwitch VXLAN tunneling support (in tree)
ovs_kmod_openvswitch-vxlan-intree_depends:= +kmod-openvswitch-intree +kmod-vxlan
ovs_kmod_openvswitch-vxlan-intree_files:= $(ovs_kmod_intree_dir)/vport-vxlan.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-vxlan-intree))
ovs_kmod_openvswitch-geneve-intree_title:=Open vSwitch Geneve tunneling support (in tree)
ovs_kmod_openvswitch-geneve-intree_depends:= +kmod-openvswitch-intree +kmod-geneve
ovs_kmod_openvswitch-geneve-intree_files:= $(ovs_kmod_intree_dir)/vport-geneve.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-geneve-intree))
ovs_kmod_openvswitch-stt-intree_title:=Open vSwitch STT tunneling support (in tree)
ovs_kmod_openvswitch-stt-intree_depends:= +kmod-openvswitch-intree
ovs_kmod_openvswitch-stt-intree_files:= $(ovs_kmod_intree_dir)/vport-stt.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-stt-intree))
ovs_kmod_openvswitch-lisp-intree_title:=Open vSwitch LISP tunneling support (in tree)
ovs_kmod_openvswitch-lisp-intree_depends:= +kmod-openvswitch-intree
ovs_kmod_openvswitch-lisp-intree_files:= $(ovs_kmod_intree_dir)/vport-lisp.ko
$(eval $(call OvsKmodPackageTemplate,openvswitch-lisp-intree))
ovs__common_depends:=+libatomic +librt
# Dependency review
#
# for f in sbin/*; do echo $f; readelf -d $f | grep -i shared; done
# for f in bin/*; do echo $f; readelf -d $f | grep -i shared; done
# for f in lib/*.so; do echo $f; readelf -d $f | grep -i shared; done
#
ovs_libopenvswitch_title:=Open vSwitch (libopenvswitch.so)
ovs_libopenvswitch_hidden:=1
ovs_libopenvswitch_depends:=+libopenssl +libunbound +!(arc||arceb):libunwind
ovs_libopenvswitch_depends+=$(ovs__common_depends)
ovs_libopenvswitch_files:=usr/lib/libopenvswitch*.so*
$(eval $(call OvsPackageTemplate,libopenvswitch))
ovs_libofproto_title:=Open vSwitch (libofproto.so libsflow.so)
ovs_libofproto_hidden:=1
ovs_libofproto_depends+=$(ovs__common_depends)
ovs_libofproto_files:=usr/lib/libofproto*.so* usr/lib/libsflow*.so*
$(eval $(call OvsPackageTemplate,libofproto))
ovs_libovsdb_title:=Open vSwitch (libovsdb.so)
ovs_libovsdb_hidden:=1
ovs_libovsdb_depends+=$(ovs__common_depends)
ovs_libovsdb_files:=usr/lib/libovsdb*.so*
$(eval $(call OvsPackageTemplate,libovsdb))
ovs_vswitchd_title:=Open vSwitch (ovs-vswitchd)
ovs_vswitchd_hidden:=1
ovs_vswitchd_depends:=+openvswitch-libopenvswitch +openvswitch-libofproto
ovs_vswitchd_depends+=$(ovs__common_depends)
ovs_vswitchd_files:=usr/sbin/ovs-vswitchd
$(eval $(call OvsPackageTemplate,vswitchd))
ovs_ovsdb_title:=Open vSwitch (ovsdb-server)
ovs_ovsdb_hidden:=1
ovs_ovsdb_depends:=+openvswitch-libopenvswitch +openvswitch-libovsdb
ovs_ovsdb_depends+=$(ovs__common_depends)
ovs_ovsdb_files:=usr/sbin/ovsdb-server
$(eval $(call OvsPackageTemplate,ovsdb))
ovs_common_title:=Open vSwitch (common files)
ovs_common_hidden:=1
ovs_common_depends:=+openvswitch-libopenvswitch +openvswitch-libofproto +openvswitch-libovsdb
ovs_common_depends+=$(ovs__common_depends)
ovs_common_files:= \
usr/share/openvswitch/scripts/ovs-lib \
usr/share/openvswitch/scripts/ovs-ctl \
usr/share/openvswitch/scripts/ovs-kmod-ctl \
usr/share/openvswitch/scripts/ovs-save \
$(foreach b,ovs-appctl ovs-dpctl ovs-ofctl ovs-vsctl ovsdb-client ovsdb-tool,usr/bin/$(b))
define ovs_common_install
$$(INSTALL_DIR) $$(1)/etc/openvswitch
$$(INSTALL_DIR) $$(1)/etc/init.d
$$(INSTALL_BIN) ./files/openvswitch.init $$(1)/etc/init.d/openvswitch
$$(INSTALL_DIR) $$(1)/etc/config
$$(INSTALL_DATA) ./files/openvswitch.config $$(1)/etc/config/openvswitch
$$(INSTALL_DIR) $$(1)/usr/share/openvswitch/scripts
$$(INSTALL_BIN) ./files/ovs-ctl-wrapper $$(1)/usr/share/openvswitch/scripts/
$$(LN) /usr/share/openvswitch/scripts/ovs-ctl-wrapper $$(1)/usr/bin/ovs-ctl
$$(LN) /usr/share/openvswitch/scripts/ovs-ctl-wrapper $$(1)/usr/bin/ovs-kmod-ctl
endef
define Package/openvswitch-common/conffiles
/etc/config/openvswitch
/etc/openvswitch
endef
$(eval $(call OvsPackageTemplate,common))
# coreutils-sleep is required by ovs-lib for sleeping a fraction of second
#
# uuidgen is required for generating system-id
ovs_openvswitch_title:=Open vSwitch
ovs_openvswitch_hidden:=
ovs_openvswitch_depends:=+coreutils +coreutils-sleep +uuidgen \
+openvswitch-common +openvswitch-vswitchd +openvswitch-ovsdb +kmod-openvswitch
ovs_openvswitch_depends+=$(ovs__common_depends)
ovs_openvswitch_files:= usr/share/openvswitch/vswitch.ovsschema
$(eval $(call OvsPackageTemplate,openvswitch))
ovs_python3_title:=Open vSwitch (Python3 library)
ovs_python3_hidden:=
ovs_python3_depends:=+PACKAGE_openvswitch-python3:python3 +PACKAGE_openvswitch-python3:python3-six
define ovs_python3_install
$$(INSTALL_DIR) $$(1)$$(PYTHON3_PKG_DIR)
$$(CP) $$(PKG_INSTALL_DIR)/usr/share/openvswitch/python/ovs $$(1)$$(PYTHON3_PKG_DIR)
endef
$(eval $(call OvsPackageTemplate,python3))
CONFIGURE_ARGS+= \
--enable-ndebug \
--enable-shared \
--disable-libcapng \
--disable-silent-rules \
CONFIGURE_VARS += \
ovs_cv_flake8=no \
ovs_cv_python3=$(PYTHON3) \
ovs_cv_python3_host=$(HOST_PYTHON3_BIN) \
SPHINXBUILD=none \
KARCH=$(LINUX_KARCH) \
ovs_intree_kmod_configs:=CONFIG_PACKAGE_kmod-openvswitch-intree
ovs_intree_kmod_enabled:=$(strip $(foreach c,$(ovs_intree_kmod_configs),$($(c))))
PKG_CONFIG_DEPENDS+=$(ovs_intree_kmod_configs)
ifneq ($(ovs_intree_kmod_enabled),)
ifeq ($(ovs_kmod_intree_not_supported),)
CONFIGURE_ARGS += --with-linux=$(LINUX_DIR)
else
$(warning XXX: openvswitch: intree kmods selected but not supported)
endif
endif
TARGET_CFLAGS += -flto -std=gnu99
MAKE_VARS += PYTHONPATH="$(HOST_PYTHON3PATH)"
export OVS_KERNEL_MAKE_FLAGS=$(KERNEL_MAKE_FLAGS)
override CONFIG_AUTOREMOVE=
$(foreach p,$(ovs_kmod_packages),\
$(eval $(call KernelPackage,$(p)))\
)
$(foreach p,$(ovs_packages),\
$(eval $(call BuildPackage,$(p)))\
)
Reference in a new issue View git blame Copy permalink