#
# Sample Coova-Chilli configuration file
#
config chilli
# disable to running chilli. remove this option before running.
option disabled 1
# name of TUN device name. required.
option tundev 'tun0'
# name of network interface
option network ''
# Include this flag to include debug information.
#option debug 1
# Re-read configuration file at this interval. Will also cause new domain
# name lookups to be performed. Value is given in seconds.
#option interval 3600
# Directory to use for nonvolatile storage.
# The program must have write access to this directory.
# this option is currently ignored
#option statedir ./
# TUN parameters
# IP network address of external packet data network
# Used to allocate dynamic IP addresses and set up routing.
# Normally you do not need to uncomment this option.
#option net 192.168.182.0/24
# Dynamic IP address pool
# Used to allocate dynamic IP addresses to clients.
# If not set it defaults to the net tag.
# Do not uncomment this option unless you are an experienced user!
#option dynip 192.168.182.0/24
# Static IP address pool
# Used to allocate static IP addresses to clients.
# Do not uncomment this option unless you are an experienced user!
#option statip 192.168.182.0/24
# Primary DNS server.
# Will be suggested to the client.
# If omitted the system default will be used.
# Normally you do not need to uncomment this option.
#option dns1 172.16.0.5
# Secondary DNS server.
# Will be suggested to the client.
# If omitted the system default will be used.
# Normally you do not need to uncomment this option.
#option dns2 172.16.0.6
# Domain name
# Will be suggested to the client.
# Normally you do not need to uncomment this option.
#option domain key.chillispot.org
# Script executed after network interface has been brought up.
# Executed with the following parameters: <devicename> <ip address>
# <mask>
# Normally you do not need to modify this option.
option ipup /etc/chilli/up.sh
# Script executed after network interface has been taken down.
# Executed with the following parameters: <devicename> <ip address>
# <mask>
# Normally you do not need to modify this option.
option ipdown /etc/chilli/down.sh
# Radius parameters
# IP address to listen to
# Normally you do not need to uncomment this option.
#option radiuslisten 127.0.0.1
# IP address of radius server 1
# For most installations you need to modify this option.
option radiusserver1 rad01.chillispot.org
# IP address of radius server 2
# If you have only one radius server you should set radiusserver2 to the
# same value as radiusserver1.
# For most installations you need to modify this option.
option radiusserver2 rad02.chillispot.org
# Radius authentication port
# The UDP port number to use for radius authentication requests.
# The same port number is used for both radiusserver1 and radiusserver2.
# Normally you do not need to uncomment this option.
#option radiusauthport 1812
# Radius accounting port
# The UDP port number to use for radius accounting requests.
# The same port number is used for both radiusserver1 and radiusserver2.
# Normally you do not need to uncomment this option.
#option radiusacctport 1813
# Radius shared secret for both servers
# For all installations you should modify this option.
#option radiussecret testing123
# Radius NAS-Identifier
# Normally you do not need to uncomment this option.
#option radiusnasid nas01
# WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>,
# cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>
# Normally you do not need to uncomment this option.
#option radiuslocationid isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport
# WISPr Location Name. Should be in the format:
# <HOTSPOT_OPERATOR_NAME>,<LOCATION>
# Normally you do not need to uncomment this option.
#option radiuslocationname ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport
# Radius proxy parameters
# IP address to listen to
# Normally you do not need to uncomment this option.
#option proxylisten 10.0.0.1
# UDP port to listen to.
# If not specified a port will be selected by the system
# Normally you do not need to uncomment this option.
#option proxyport 1645
# Client(s) from which we accept radius requests
# Normally you do not need to uncomment this option.
#option proxyclient 10.0.0.1/24
# Radius proxy shared secret for all clients
# If not specified defaults to radiussecret
# Normally you do not need to uncomment this option.
#option proxysecret testing123
# DHCP Parameters
# Ethernet interface to listen to.
# This is the network interface which is connected to the access points.
# In a typical configuration this option should be set to eth1.
option dhcpif eth1
# Use specified MAC address.
# An address in the range 00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls
# within the IANA range of addresses and is not allocated for other
# purposes.
# Normally you do not need to uncomment this option.
#option dhcpmac 00:00:5E:00:02:00
# Time before DHCP lease expires
# Normally you do not need to uncomment this option.
#option lease 600
# Universal access method (UAM) parameters
# URL of web server handling authentication.
option uamserver https://radius.chillispot.org/hotspotlogin
# URL of welcome homepage.
# Unauthenticated users will be redirected to this URL. If not specified
# users will be redirected to the uamserver instead.
# Normally you do not need to uncomment this option.
#option uamhomepage http://192.168.182.1/welcome.html
# Shared between chilli and authentication web server
#option uamsecret ht2eb8ej6s4et3rg1ulp
# IP address to listen to for authentication requests
# Do not uncomment this option unless you are an experienced user!
#option uamlisten 192.168.182.1
# TCP port to listen to for authentication requests
# Do not uncomment this option unless you are an experienced user!
#option uamport 3990
# Comma separated list of domain names, IP addresses or network segments
# the client can access without first authenticating.
# It is possible to specify this option multiple times.
# Normally you do not need to uncomment this option.
#option uamallowed www.chillispot.org,10.11.12.0/24
# Comma separated list of domain names
# the client can access without first authenticating.
# It is possible to specify this option multiple times.
# Normally you do not need to uncomment this option.
#option uamdomain .chillispot.org,.coova.org
# If this flag is given unauthenticated users are allowed to use
# any DNS server.
# Normally you do not need to uncomment this option.
#option uamanydns
# MAC authentication
# If this flag is given users will be authenticated only on their MAC
# address.
# Normally you do not need to uncomment this option.
#option macauth
# List of MAC addresses.
# The MAC addresses specified in this list will be authenticated only on
# their MAC address.
# this option is ignored if the macauth tag is given.
# It is possible to specify this option multiple times.
# Normally you do not need to uncomment this option.
#option macallowed 00-0A-5E-AC-BE-51,00-30-1B-3C-32-E9
# Password to use for MAC authentication.
# Normally you do not need to uncomment this option.
#option macpasswd password
# Suffix to add to MAC address in order to form the username.
# Normally you do not need to uncomment this option.
#option macsuffix suffix