Refreshed patches.
And apply hack for line-endings in pep517 (from pip).
Hack comment:
# FIXME: [1] get rid of this asap; 'patch' doesn't like Windows endings, and this file is full of them...
# I actually tried this in a number of ways and the only way to fix this is to implement
# a poor-man's dos2unix using sed.
# The issue is with the pip package; it seems that it throws in some Windows line-endings
# and 'patch' won't handle them. So, we do a "dos2unix" and then patch.
# We can get rid of this once this is solved upstream and in pip:
# https://github.com/pypa/pep517/pull/130
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Changelog:
- Bumped upper bound of the chardet runtime dependency to allow their v4.0 version stream.
From a1158c5389/CHANGES.rst
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
It often happens that we update a package to a new version (e.g. cffi) to a
newer version, but we forget to update the version for cffi in the
`lang/python/host-pip-requirements/cffi.txt` file.
This check adds a minimal check, so that when a build occurs for a Python
package, if there is a mention/listing of this package in
`lang/python/host-pip-requirements/` it will check that the versions match.
This way, when we update a package, we get a build failure and update the
host version as well.
This will omit packages (like Cython) that are not packaged for OpenWrt,
but are host-side dependencies only.
But until we find some mechanism to check for those, we will probably only
notice to update them when another build occurs (at the very least).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Django 1.11 (host-build) is only needed for Seahub.
And won't ever be needed for anything else (hopefully).
This change moves it to the Seahub folder.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* update license (changed in 1.2.0)
* removed python3-six dependency (removed in 1.0.0)
* do not install tests
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
I tried to install matplotlib by using pip and it failed with the following output:
2021-08-18T11:52:26,171 Collecting matplotlib
2021-08-18T11:52:26,173 Created temporary directory: /tmp/pip-unpack-wuth2u0e
2021-08-18T11:52:26,565 Using cached matplotlib-3.4.3.tar.gz (37.9 MB)
2021-08-18T11:52:38,659 Added matplotlib from https://files.pythonhosted.org/packages/21/37/ 197e68df384ff694f78d687a49ad39f96c67b8d75718bc61503e1676b617/matplotlib-3.4.3.tar. gz#sha256=fc4f526dfdb31c9bd6b8ca06bf9fab663ca12f3ec9cdf4496fb44bc680140318 to build tracker '/tmp/pip- req-tracker-u30x8pht'
2021-08-18T11:52:38,660 Running setup.py (path:/tmp/pip-install-afiyiers/ matplotlib_8e717e38862f4976a3d6cb1832ba3261/setup.py) egg_info for package matplotlib
2021-08-18T11:52:38,661 Created temporary directory: /tmp/pip-pip-egg-info-kbtiezxq
2021-08-18T11:52:38,662 Running command python setup.py egg_info
2021-08-18T11:52:38,831 Traceback (most recent call last):
2021-08-18T11:52:38,832 File "<string>", line 1, in <module>
2021-08-18T11:52:38,832 File "/usr/lib/python3.9/site-packages/setuptools/__init__.py", line 8, in <module>
2021-08-18T11:52:38,833 ModuleNotFoundError: No module named '_distutils_hack'
More details about it:
- https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=968410
Once I applied the patch from the bug tracker, I got further to install
it.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Changelog:
PycURL 7.44.0 - 2021-08-08
--------------------------
This release reinstates best effort Python 2 support, adds Python 3.9 and
Python 3.10 alpha support and implements support for several libcurl options.
Official Windows builds are currently not being produced.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
- BACKWARDS COMPATIBILITY:
- Deprecated the distro.linux_distribution() function. Use
distro.id(), distro.version() and distro.name() instead [#296]
- Deprecated Python 2.7, 3.4 and 3.5 support. Further releases will
only support Python 3.6+
- ENHANCEMENTS:
- Added type hints to distro module [#269]
- Added __version__ for checking distro version [#292]
- Added support for arbitrary rootfs via the root_dir parameter
[#247]
- Added the --root-dir option to CLI [#161]
- Added fallback to /usr/lib/os-release when /etc/os-release isn't
available [#262]
- BUG FIXES:
- Fixed subprocess.CalledProcessError when running lsb_release
[#261]
- Ignore /etc/iredmail-release file while parsing distribution
[#268]
- Use a binary file for /dev/null to avoid TextIOWrapper overhead
[#271]
- RELEASE:
- Moved repository from nir0s/distro to python-distro/distro on
GitHub.
Signed-off-by: Javier Marcet <javier@marcet.info>
This package was updated without a hash change.
Fixes: c157522580 ("pyodbc: update to version 4.0.31")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Also bump Cython version to 0.29.23.
And add support for OpenBLAS.
Currently optional, but will be enabled by default on some architectures
later.
Depends on PR https://github.com/openwrt/packages/pull/15685
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This version prefers charset_normalizer instead of chardet.
chardet is still usable if available.
Dropping patches for idna. Not required anymore.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Python works with GNU DBM and with Berkley DBM.
Berkley DBM has been under Oracle for some time.
And it's not clear how many Python users actually use DBM.
In the packages feed, we have both libdb47 (which is now under Oracle) and
GNU DBM. The GNU DBM has a compatibility layer for Berkley DBM.
There are newer versions than libdb47, but it's probably not worth having
them yet. The libbd47 tarball is ~40+ MB. Odds are newer versions will be
bigger and more bloated.
This change merges the old `python3-gdbm` package into the `python3-dbm`
package, since they are effectively using the same underlying library now,
i.e. gdbm.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
I seem to forget to check/select setuptools and pip (that come bundled with
Python).
This change will do a simple 'ls' on the 2 wheel files, so that the build
fails even if just building Python.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Dropped patches:
0004-Replace-EVP_CIPHER_CTX_cleanup-with-EVP_CIPHER_CTX_r.patch
0005-Switch-get_-Update-APIs-to-get0.patch
Reworked patches:
0001-Add-new-ASN1_STRING_get0_data-API.patch
0006-Add-X509_STORE_CTX_trusted_stack-compatibility-macro.patch
These 2 require that we keep only the CUSTOMIZATIONS stuff for now. Maybe
later we can drop this.
Ran 'make package/python-cryptography/refresh'.
Added patch:
0004-disable-rust.patch
upstream did a sloppy job with the CRYPTOGRAPHY_DONT_BUILD_RUST logic; we
need to patch it, to make sure the setuptools-rust isn't installed.
We may need to carry this patch in our tree for a bit longer than upstream,
because in newer versions, CRYPTOGRAPHY_DONT_BUILD_RUST logic gets removed.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
By adding these dependencies, it is much easier for users (both
applications that use Twisted and end users) to have secure
communications by default.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Python3 comes with a built-in readline module. It wasn't included up until
now; mostly because it wasn't considered.
This change introduces it as a sub-package of the main Python3 package.
readline support is included in Python.
libreadline pulls libncursesw as a package, so python3-ncurses was
updated to pull libncursesw as well.
It should be the same package; mostly done for consistency.
Resolves the issue reported here:
https://forum.openwrt.org/t/python3-repl-missing-readline/90039
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Refreshed Python patches.
Updated pip & setuptools version.
For pip, patch '001-pep517-pyc-fix.patch' was reworked.
Also, the current version of the bundled pip (21.1.1) no longer supports
Python2, so the 'py2.py3' suffix gets replaced with just py3.
For setuptools, there is no longer a script/module:
https://github.com/pypa/setuptools/pull/2544
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Related to discussion:
https://github.com/openwrt/packages/pull/14060
Every once in a while a version bump will occur that requires an ABI
change. Example: Python 3.8 to 3.9. When this happens some Python packages
would need to be rebuilt. In setups where everything gets rebuilt, this
isn't a problem.
It's usually a bigger problem when needing to upgrade something via
opkg.
To accommodate for this, we add a libpython with it's own ABI_VERSION
flag. If this ABI_VERSION changes, then this should propagate forward.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Fixes: https://github.com/openwrt/packages/issues/15370
This is inspired from:
330bc94dcc/lang/python-greenlet/Makefile
The `PKG_USE_MIPS16:=0` is not taken into consideration when building
Python modules. That's because the sysconfig is used.
This is only an issue with greenlet (on MIPS) so far.
One option is to do `PKG_USE_MIPS16:=0` in the core Python package.
But, since we know that the `wlanslovenija` group has successfully used
greenlet on MIPS with this construct, we might as well adopt it until GCC10
becomes the main compiler.
As noted here:
https://github.com/openwrt/packages/issues/15370#issuecomment-817015484
GCC10 doesn't have this problem.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Bugfixes:
- Remove LD_LIBRARY_PATH and SSL_CERT_FILE environment variables when
shelling out to the ssh client.
Signed-off-by: Javier Marcet <javier@marcet.info>
Psycopg is the most popular PostgreSQL adapter for the Python programming language
It's used by the python-sqlalchemy for postgresql
This package was removed by this commit for lacking python3 support:
c37b15e1c4
Version 2.8.6 used in this package now supports pyhton3
Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
Includes fixes for:
* CVE-2021-3177 - ctypes: Buffer overflow in PyCArg_repr
* CVE-2021-23336 - urllib parse_qsl(): Web cache poisoning - semicolon
as a query args separator
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The crude loop I wrote to come up with this changeset:
find -L package/feeds/packages/ -name patches | \
sed 's/patches$/refresh/' | sort | xargs make
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
The Python version of python-config is installed when building on macOS,
rather than the shell script version when building on Linux. When run on
macOS, the Python version of python-config will return values with
Mac-specific customizations.
This patches the python-config install recipe so that which version is
installed can be controlled by the package makefile. When building on
macOS, this installs the Python version for host Python and the shell
script version for target Python.
This also updates Host/Compile and Host/Install to use the default host
build recipes, so that the various HOST_* variables are taken into
account automatically.
Fixes https://github.com/openwrt/packages/issues/14652
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
quilt cannot handle two patches in one file. It ends up merging them
and removing the description from the second. To avoid this, split into
two.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Regenerated patches from:
https://github.com/pyca/cryptography/pull/4920
The patch names were kept as generated via 'git format-patch 3.3.1..'
And ran through quilt.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Because of e52d0487e88c3c8c57e1310d1a02b18eae0d142e , these flags no
longer get passed. Add them back to fix compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
