Busybox in default uses SHA512 as well.
On big ditribution this default is sourced from PAM. That means that
shadow reads pam settings and uses that. OpenWrt in most cases does not
have PAM installed and in such case shadow fallbacks to its own default
which is DES. This just changes that default to SHA512 which is
consistent with rest of the system.
Signed-off-by: Karel Kočí <karel.koci@nic.cz>
(cherry picked from commit f27ce05a58)
Removed findutils-xargs dependency due to added busybox support in version 2.8
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 2c22dcd3dc)
Update collectd to 5.10.0
* leave new plugins as disabled for now (procevent, sysevent)
* refresh patches. Remove unenecessary version fix
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07. PKG_RELEASE=2 as cpufreq was already backported)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Update collectd to 5.9.2
Mainly bug fixes:
dfb9dd09fe/ChangeLog
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Collectd without log type plugin loaded will write log lines to stderr.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry-picked for 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The only action the Threshold plugin takes itself is to generate and
dispatch a notification. Other plugins can register to receive
notifications and perform appropriate further actions.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry-picked for 19.07, line numbers adjusted)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Redmine-patch-id: 3680
If I build an image with the imagebuilder I get the following output
during image building:
../root-x86/etc/init.d/collectd: line 4: /usr/share/libubox/jshn.sh:
No such file or directory
To remove this messsage move include to the needed postion, so that the
message does not occur during image building on the host system anymore.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry-picked, modified to match 19.07)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
As some ipq40xx CPUs support frequency scaling, enable building
collectd-mod-cpufreq for ipq40xx (for private builds) and
its package architecture brcm2708_bcm2709 (for buildbot)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 5e0d5c9c7f)
Drop the config knob 'listen_address' and introduce 'listen_interface'
and 'listen_ipv6' instead.
'listen_interface' takes an openwrt interface name ('loopback', 'lan',
'wan' etc, or "*" for all), from which the primary IP is used to listen
on. If 'listen_ipv6' is set to '1', the IPv6 adress will be used, IPv4
elsewise.
procd interface triggers are now combined with this, so if the listen
interface is not yet configured when the init script is executed, the
process start is defered, and the trigger takes care of that once
the interface is ready.
Fixes#7670
Signed-off-by: Andre Heider <a.heider@gmail.com>
(cherry picked from commit 48568ad9f9)
Upstream project's behaviour of reporting this data source in range 0-1
is used by at least CentOS 7 collectd 5.8.1, very likely the same
behaviour is also in widely use by other distributions.
The change is important for providing consistent experience across
collectd deployments on different environments
Ref: https://github.com/collectd/collectd/pull/3244
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 2f66fa5c23)
Ref: https://github.com/openwrt/luci/issues/3308
Add the OpenWrt TARGET_LDFLAGS to the compile command to activate PIE support
for the io tool when it is activated globally in OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
(cherry-picked from b46d21a54e)
On 64 bit Linux systems long is 8 bytes long, on 32 bit Linux systems it
is 4 bytes long. Here we want to print 4 bytes and not 8 bytes, use int
instead of long.
This fixes printing 4 bytes on 64 bit systems.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry-picked from 9936e16b72)
Only when /dev/mem is opened with O_SYNC the write and *read* is done
uncached. We saw wrong values read out from the hardware without setting
O_SYNC, the busybox devmem tool showed different values, when O_SYNC is
also set for the io tool, it reads out the same values as devmem.
When looking at the drivers/char/mem.c file in the kernel it is behaving
differently based on the O_DSYNC flag.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
(cherry-picked from 90df0f3e24)
Indeterminably vim/host fails on the build bots:
objects/fileio.o: In function `readfile':
fileio.c:(.text+0x5b3f): undefined reference to `libiconv_close'
fileio.c:(.text+0x61ad): undefined reference to `libiconv_close'
fileio.c:(.text+0x62f6): undefined reference to `libiconv'
fileio.c:(.text+0x6794): undefined reference to `libiconv_close'
objects/fileio.o: In function `buf_write_bytes':
fileio.c:(.text+0xa1fe): undefined reference to `libiconv'
fileio.c:(.text+0xa54a): undefined reference to `libiconv'
objects/fileio.o: In function `buf_write':
fileio.c:(.text+0xaf48): undefined reference to `libiconv_close'
objects/mbyte.o: In function `my_iconv_open.part.18':
mbyte.c:(.text+0x2ced): undefined reference to `libiconv_open'
mbyte.c:(.text+0x2d3a): undefined reference to `libiconv'
mbyte.c:(.text+0x2d5f): undefined reference to `libiconv_close'
objects/mbyte.o: In function `convert_setup_ext':
mbyte.c:(.text+0x33bf): undefined reference to `libiconv_close'
objects/mbyte.o: In function `string_convert_ext':
mbyte.c:(.text+0x363c): undefined reference to `libiconv'
collect2: error: ld returned 1 exit status
link.sh: Linking failed
Makefile:1949: recipe for target 'vim' failed
This is addressed by pulling in libiconv/host. Also configure switches
are added that keep external dependencies to a minimum, for instance
avoiding to link to X11 or gettext.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
(cherry-picked from dc727a2430)
This allows collectd to get data of Mikrotik devices in a improved way than via SNMP.
closes#10327
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
cherry-pick does not apply cleanly changed PKG_RELEASE number.
(cherry picked from commit 4261f45734)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This is not a C++ project.
Added PKG_BUILD_PARALLEL for faster compilation.
Cleaned up Makefile to modern standards.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry-picked from b288514308)
Added patches sent upstream to fix usage with uClibc++.
Cleaned up license information.
Added several size optimizations.
Several other Makefile cleanups.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
