Release notes:
1.8.0
- Upgrade json.hpp dependency to version 3.10.2
- Check if DNS servers need to be applied on macOS
- Set MAC address before bringing up Linux TAP link
- Stop binding to temporary IPv6 addresses
- Fix for mistakenly using v6 source addresses for v4 routes on some platforms
- Fix for MacOS MTU capping issue on feth devices
- Implement a workaround for one potential source of a "coma" bug, which can occur if buggy NATs/routers stop allowing the service to communicate on a given port. ZeroTier now reassigns a new secondary port if it's offline for a while unless a secondary port is manually specified in local.conf. Working around crummy buggy routers is an ongoing effort.
- A completely rewritten desktop UI for Mac and Windows!
1.8.1
- Fix an issue that could cause clobbering of MacOS IP route settings on restart.
- Added additional hardening against address impersonation on networks (also in 1.6.6).
- MacOS IPv6 no longer binds to temporary addresses as these can cause interruptions if they expire.
- Remove support for REALLY ancient 1.1.6 or earlier network controllers.
- Fix numerous UI issues from 1.8.0 (never fully released).
Changed to git as source and added $(AUTORELEASE)
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Client and server software to query DNS over HTTPS, using Google DNS-over-HTTPS protocol and IETF DNS-over-HTTPS (RFC 8484). https://github.com/m13253/dns-over-https
Signed-off-by: Martin Schneider <martschneider@google.com>
Side-effect of dropping capabilities(7) with last commit is now we
need the `/var/run/named/` directory created for us at startup.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reasons to drop this package:
a) this package depends on luci-app-rosy-file-server
Unfortunately, it was marked as broken as it is unmaintained.
See: 34b682afac
b) maintainer is inactive
c) rosinson website does not seem to be working
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Update to the newest versions and switch to $(AUTORELEASE) for the python3 packages (where I am the maintainer).
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Currently when the connection times out, the interface will disconnect.
Add capability to add persistent option to re-establish connectivity.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* adopt pypi name and line numbers in patches
* remove custom tar command and patch for using python3 (changed upstream)
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
It never works... And Xray-core needs root access to work.
Bump geodata to latest version while at it.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
The following CVE updates are included:
* CVE-2021-25219: The "lame-ttl" option is now forcibly set to 0. This
effectively disables the lame server cache, as it could previously be
abused by an attacker to significantly degrade resolver performance.
* CVE-2021-25218: An assertion failure occurred when named attempted
to send a UDP packet that exceeded the MTU size, if Response Rate
Limiting (RRL) was enabled.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reload the service when interfaces flap; note that libcap support
is required to open new sockets on interfaces coming up during
a reload, otherwise a full restart would be needed.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Use newly introduced procd_add_reload_mount_trigger to reload nfsd
when a mountpoint covering an exported filesystem is added by blockd.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fix uci-defaults for PostgreSQL backends
Add user 'gnunet' to 'postgres' group
Always build with sqlite3 as configure fails when --without-sqlite
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
If an interface doesn't exist yet when vnStat is started, it won't be
monitored, as only existing interfaces can be added to the database via
the vnstat command.
This adds a hotplug script which adds any configured interfaces to the
vnStat database when it goes up.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
By default, vnstatd adds all available interfaces on startup when its
database is empty. The --noadd option prevents this, but it breaks
import of legacy databases, and causes vnstatd to exit immediately
after startup, which breaks reloading.
This changes the init script to add the --noadd option when no legacy
databases need to be imported, and patches vnstatd to keep running
even when no interfaces are configured.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
This has been replaced with the "trust-anchors" keyword, per
section 8.21.1 New Features of the Bind 9 Administrator Reference
Manual:
• In order to clarify the configuration of DNSSEC keys, the trusted-keys and managed-keys statements have been deprecated, and the new trust-anchors statement should now be used for both types of key.
When used with the keyword initial-key, trust-anchors has the same behavior as managed-keys, i.e., it configures a trust anchor that is to be maintained via RFC 5011.
When used with the new keyword static-key, trust-anchors has the same behavior as trusted-keys, i.e., it configures a permanent trust anchor that will not automatically be updated. (This usage is not recommended for the root key.) [GL #6]
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
apxs is used to get information about the apache installation when
building external modules. Currently there are issues:
1.
./staging_dir/target-mips_24kc_musl/usr/bin/apxs -q TARGET
apache2
apxs:Error: ./staging_dir/target-mips_24kc_musl/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/apr-1-config not found!.
This error is fixed by sed script #2.
2.
./staging_dir/target-mips_24kc_musl/usr/bin/apxs -q TARGET
cannot open ./staging_dir/target-mips_24kc_musl/home/sk/tmp/openwrt/staging_dir/target-mips_24kc_musl/usr/share/apache2/build/config_vars.mk: No such file or directory at ./staging_dir/target-mips_24kc_musl/usr/bin/apxs line 213.
This error is fixed by sed scipt #1.
Both sed scripts taken from buildroot (see [1]).
[1] https://github.com/buildroot/buildroot/blob/master/package/apache/apache.mk
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This commits adds the new usteer package to the packages feed.
usteer is a daemon for steering wireless clients across frequency
bands as well as between multiple access points on a network.
Signed-off-by: David Bauer <mail@david-bauer.net>
ospf running in instance mod will keep cpu to 100% so revert offending commit
if daemon is disabled in the file while running also close that daemon
also add the pythontools to support reload
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Some users report that DAWN sometimes crashes after a while. Mostly
this happens after the new update has been rolled out.
Since I would not like to go back to the older version, I add as
a workaround for now that DAWN automatically respawned.
Workaround for:
https://github.com/berlin-open-wireless-lab/DAWN/issues/151
Signed-off-by: Nick Hainke <vincent@systemli.org>
WWAN devices may now be exposed in the new 'wwan' subsystem in the
kernel (since 5.13), initially applicable to devices exposed in PCIe
(no USB), but at some point may also apply to USB devices that until
now were exposed via other subsystems (e.g. usbmisc, tty).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
* bugfix: change killall param from -HUP to -s HUP
* bugfix: change tmpfs param from status to gateway
Signed-off-by: Stan Grishin <stangri@melmac.net>
* there are reports that 0.3.5-x versions do not work on some configs
* the development of the new features moved to the new package (pbr)
* revert to the last known good version of vpn-policy-routing
Signed-off-by: Stan Grishin <stangri@melmac.net>
* refresh patches
* disabling kres_gen_test is not required anymore for cross compilation, it was fixed upstream with the 5.4.1 release
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
This uses some definitions from <sys/cdefs.h> in gcc 8.4.0, not present
in musl or gcc11.
Also use clock_gettime() instead of syscall(__NR_clock_gettime,...),
which is not currently defined.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* update to [2021-09-27](da2501f542)
* fixes https://github.com/aarond10/https_dns_proxy/issues/125
* restart instead of reload on interface hotplug
* fixes https://github.com/openwrt/packages/issues/16794
* produce output and log entries on service start/stop
* prevent unnecessary dnsmasq restarts if service has previously updated dnsmasq settings
* allow both named and typed dnsmasq instance settings to be updated
* update 010-fix-cmakelists patch file
Signed-off-by: Stan Grishin <stangri@melmac.net>
Default to letsencrypt because the upstream default may change.
Passing --staging is no longer needed, since --serever will
select a staging server if needed.
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Georgi Valkov <gvalkov@abv.bg>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
/net/crowdsec-firewall-bouncer/
crowdsec-firewall-bouncer will fetch new and old decisions from
a CrowdSec API to add them in a blocklist used by supported firewalls.
Signed-off-by: Kerma Gérald <gandalf@gk2.net>
/net/crowdsec/
Crowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global community-wide
IP reputation database.
Signed-off-by: Kerma Gérald <gandalf@gk2.net>
* c70773a - datastorage: use signal strength as a metric
* 14e0f83 - Don't display debugging output with DAWN_NO_OUTPUT
* 97e5de1 - uci: add neighbor list priority options
* 2b1a53c - dawn_uci: set default values
* 6eb747b - Use separate configs for 802.11g & 802.11a bands
* 1e34357 - Verify compatibility before parsing config message
* a7a8309 - List all neighbors with same score when kicking
* 3ba0fa4 - Change beacon request fields to appropriate values
* 009aab9 - Change mode config parameter from int to string
Signed-off-by: Nick Hainke <vincent@systemli.org>
Update to GNUnet release 0.15.3.
Note that GNUnet 0.15.x is incompatible with the previous 0.14.x
wire format.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- Update haproxy download URL and hash
- Make build-target and parameters dependant on configured c-library
- Removed duplicate build-parameters
Signed-off-by: Christian Lachner <gladiac@gmail.com>
This commit fixes an issue where the `AUTOSSH_GATETIME` is not available in the `procd` environment which gets overwritten by the second `procd_set_param env` call.
It now calls the `procd_set_param env` once with the two variables, instead of twice.
Signed-off-by: Leo Soares <leo@hyper.ag>
Switch to AUTORELEASE for simplicity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[remove irrelevant part from commit message after splitting changes]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Currently `travelmate` only support `<meta` tag
if it contains `"`. This updates `travelmate.sh` to support
`'` as well.
```html
<meta...content='1; url=
```
Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu>
This patch to remove PowerDNS' check for whether time_t is 64-bit is not needed anymore,
due to OpenWrt now having a more recent musl libc where time_t is 64-bit on all architectures.
Signed-off-by: Wout Bertrums <wout@wbnet.eu>
Switch to AUTORELEASE for simplicity.
Switch to normal tarballs.
Add license information.
Reorganize Makefile for consistency between packages.
Add libtool patch fixing compilation under some conditions.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Testing showed that additional syscalls are needed on ARMv7.
Add "clock_gettime64" and "statx" which seem to be used now instead
of "clock_gettime" and "stat" syscalls which are already listed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
When Open vSwitch is configured to use a controller, but is unable to
connect to it, Open vSwitch will setup flows to allow all traffic, if
the failure mode is not configured, or set to standalone.
As this might be a security hazard, it is also possible to configure
Open vSwitch in a secure failure mode. Enabling this mode causes Open
vSwitch to drop all traffic if it is unable to connect to the
controller.
Redirect stderr of the command to /dev/null as it does not support the
--if-exists option.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Due to a copy-paste error, libopenvswitch is missing a dependency when
Open vSwitch is configured to use unbound:
Package openvswitch-libopenvswitch is missing dependencies for the following libraries:
libunbound.so.8
Use the correct config symbol to solve this.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The genhash binary is only built when IPVS is enabled, so make its
installation depend on IPVS being enabled.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add a UCI config option to set the OpenFlow datapath description. This
allows setting a human readable description of the bridge, e.g.
"Building x, Floor y, AP z", which makes it easier to recognize the AP.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Upstream released 1.0.0, so change the package to the git tag 1.0.0
Mainly documentation and argument handling changes
Signed-off-by: Damien Mascord <tusker@tusker.org>
- Added missing conffiles
- Refreshed init srcipt to adapt the new arguments
- Renamed package name to lowercase (suggestion from upstream)
- Updated dependencies and license
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
