Add netifd script to control sstp connections.

net/sstp-client/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sstp-client
-PKG_VERSION:=1.0.12
+PKG_VERSION:=1.1.0
 PKG_RELEASE:=2
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
@@ -24,7 +24,7 @@ define Package/sstp-client
   SECTION:=net
   CATEGORY:=Network
   SUBMENU:=VPN
-  DEPENDS=+libevent2 +libopenssl +ppp
+  DEPENDS=+libevent2 +libopenssl +ppp +resolveip
   TITLE:=SSTP-Client is a SSTP client for Linux.
   URL:=http://sstp-client.sourceforge.net/
   MAINTAINER:=Federico Di Marco <fededim@gmail.com>
@@ -56,6 +56,8 @@ define Package/sstp-client/install
 	
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) files/etc $(1) 
+	$(INSTALL_DIR) $(1)/lib/netifd/proto
+	$(INSTALL_BIN) ./files/lib/netifd/proto/sstp.sh $(1)/lib/netifd/proto
 endef
 
 $(eval $(call BuildPackage,sstp-client))

net/sstp-client/files/etc/ppp/chap-secrets

@@ -1,4 +0,0 @@
-# Secrets for authentication using CHAP
-# client (domain\\username)	server		secret (password)	acceptable local IP addresses
-# SSTP-TEST\\JonDoe		sstp-test	'testme1234!'		*
-

net/sstp-client/files/lib/netifd/proto/sstp.sh

@@ -0,0 +1,130 @@
+#!/bin/sh
+
+[ -x /usr/bin/sstpc ] || exit 0
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+proto_sstp_init_config() {
+	proto_config_add_string "server"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_string "pppd_options"
+	proto_config_add_string "sstp_options"
+	proto_config_add_int "log_level"
+	proto_config_add_int "mtu"
+	proto_config_add_boolean "ipv6"
+	proto_config_add_boolean "defaultroute"
+	proto_config_add_boolean "peerdns"
+	available=1
+	no_device=1
+}
+
+proto_sstp_setup() {
+	local config="$1"; shift
+	local iface="$2"
+	local ifname="sstp-$config"
+
+	local ip serv_addr server ipv6 defaultroute peerdns
+	json_get_var server server && {
+		for ip in $(resolveip -t 5 "$server"); do
+			( proto_add_host_dependency "$config" "$ip" )
+			serv_addr=1
+		done
+	}
+	[ -n "$serv_addr" ] || {
+		echo "Could not resolve server address"
+		sleep 5
+		proto_setup_failed "$config"
+		exit 1
+	}
+
+	json_get_vars username password pppd_options sstp_options log_level ipv6 defaultroute peerdns
+	if [ "$ipv6" = 1 ]; then
+		ipv6=1
+	else
+		ipv6=""
+	fi
+	if [ "$defaultroute" = 0 ]; then
+		defaultroute=""
+	else
+		defaultroute=1
+	fi
+
+	if [ "$peerdns" = 0 ]; then
+		peerdns=""
+	else
+		peerdns=1
+	fi
+
+	[ -n "$mtu" ] || json_get_var mtu mtu
+	[ -n "$log_level" ] || log_level=0
+
+	local load
+	for module in slhc ppp_generic ppp_async ppp_mppe ip_gre gre pptp; do
+		grep -q "^$module " /proc/modules && continue
+		/sbin/insmod $module 2>&- >&-
+		load=1
+	done
+	[ "$load" = "1" ] && sleep 1
+
+	proto_init_update "$ifname" 1
+	proto_send_update "$config"
+
+	proto_run_command "$config" sstpc \
+		--cert-warn \
+		--password $password \
+		--user $username \
+		--log-level $log_level \
+		--save-server-route \
+		--ipparam $config \
+		$sstp_options \
+		$server \
+		ifname $ifname \
+		require-mschap-v2 \
+		${ipv6:++ipv6} \
+		refuse-pap \
+		noauth \
+		${defaultroute:+replacedefaultroute defaultroute} \
+		${peerdns:+usepeerdns} \
+		ip-up-script /lib/netifd/ppp-up \
+		ipv6-up-script /lib/netifd/ppp-up \
+		ip-down-script /lib/netifd/ppp-down \
+		ipv6-down-script /lib/netifd/ppp-down \
+		${mtu:+mtu $mtu mru $mtu} \
+		$pppd_options
+
+	# WORKAROUND: Workaround to properly register the sstp interface (As seeen in: https://forum.archive.openwrt.org/viewtopic.php?id=58007)
+	# WORKAROUND: Start
+	sleep 10
+	proto_init_update "$ifname" 1
+	proto_send_update "$config"
+	# WORKAROUND: End
+	
+	# if use pppoe and sstp at same time , firewall need reload .
+	# but don't konw why
+	/etc/init.d/firewall reload 2>&- >&-
+}
+
+proto_sstp_teardown() {
+	local interface="$1"
+
+	case "$ERROR" in
+		11|19)
+			proto_notify_error "$interface" AUTH_FAILED
+			proto_block_restart "$interface"
+		;;
+		2)
+			proto_notify_error "$interface" INVALID_OPTIONS
+			proto_block_restart "$interface"
+		;;
+	esac
+	proto_kill_command "$interface"
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol sstp
+}