sqm-scripts: use masks with markings
Apply mask for markings to enable co-existence with multiwan, mwan3 etc. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This commit is contained in:
parent
122e36be3a
commit
8001ca4c94
4 changed files with 48 additions and 36 deletions
|
@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
|
|||
|
||||
PKG_NAME:=sqm-scripts
|
||||
PKG_VERSION:=7
|
||||
PKG_RELEASE:=1
|
||||
PKG_RELEASE:=2
|
||||
PKG_LICENSE:=GPLv2
|
||||
|
||||
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
|
||||
|
|
|
@ -29,6 +29,7 @@ ipt() {
|
|||
}
|
||||
|
||||
do_modules() {
|
||||
#sm TODO: check first whether the modules exist and only load then
|
||||
insmod act_ipt
|
||||
insmod sch_$QDISC
|
||||
insmod sch_ingress
|
||||
|
@ -59,15 +60,18 @@ do_modules() {
|
|||
[ -z "$IECN" ] && IECN="ECN"
|
||||
[ -z "$EECN" ] && EECN="NOECN"
|
||||
[ -z "$SQUASH_DSCP" ] && SQUASH_DSCP="1"
|
||||
[ -z "SQUASH_INGRESS" ] && SQUASH_INGRESS="1"
|
||||
[ -z "$SQUASH_INGRESS" ] && SQUASH_INGRESS="1"
|
||||
[ -z "$IQDISC_OPTS" ] && IQDISC_OPTS=""
|
||||
[ -z "$EQDISC_OPTS" ] && EQDISC_OPTS=""
|
||||
[ -z "$TC" ] && TC=`which tc`
|
||||
#[ -z "$TC" ] && TC="sqm_logger tc"# this redirects all tc calls into the log
|
||||
[ -z "$IP" ] && IP=$( which ip )
|
||||
[ -z "$INSMOD" ] && INSMOD=`which insmod`
|
||||
[ -z "TARGET" ] && TARGET="5ms"
|
||||
[ -z "$TARGET" ] && TARGET="5ms"
|
||||
[ -z "$IPT_MASK" ] && IPT_MASK="0xff"
|
||||
[ -z "$IPT_MASK_STRING" ] && IPT_MASK_STRING="/${IPT_MASK}" # for set-mark
|
||||
|
||||
#sqm_logger "${0} IPT_MASK: ${IPT_MASK_STRING}"
|
||||
|
||||
|
||||
|
||||
|
|
|
@ -25,13 +25,13 @@ ipt_setup() {
|
|||
|
||||
ipt -t mangle -N QOS_MARK_${IFACE}
|
||||
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -j MARK --set-mark 0x2
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -j MARK --set-mark 0x2${IPT_MASK_STRING}
|
||||
# You can go further with classification but...
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS1 -j MARK --set-mark 0x3
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS6 -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class EF -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class AF42 -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m tos --tos Minimize-Delay -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS1 -j MARK --set-mark 0x3${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS6 -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class EF -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class AF42 -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m tos --tos Minimize-Delay -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
|
||||
# and it might be a good idea to do it for udp tunnels too
|
||||
|
||||
|
@ -43,16 +43,16 @@ sqm_logger "Squashing differentiated services code points (DSCP) from ingress."
|
|||
ipt -t mangle -I PREROUTING -i $IFACE -m dscp ! --dscp 0 -j DSCP --set-dscp-class be
|
||||
else
|
||||
sqm_logger "Keeping differentiated services code points (DSCP) from ingress."
|
||||
ipt -t mangle -A PREROUTING -i $IFACE -m mark --mark 0x00 -g QOS_MARK_${IFACE}
|
||||
ipt -t mangle -A PREROUTING -i $IFACE -m mark --mark 0x00${IPT_MASK_STRING} -g QOS_MARK_${IFACE}
|
||||
fi
|
||||
|
||||
ipt -t mangle -A POSTROUTING -o $IFACE -m mark --mark 0x00 -g QOS_MARK_${IFACE}
|
||||
ipt -t mangle -A POSTROUTING -o $IFACE -m mark --mark 0x00${IPT_MASK_STRING} -g QOS_MARK_${IFACE}
|
||||
|
||||
# The Syn optimization was nice but fq_codel does it for us
|
||||
# ipt -t mangle -A PREROUTING -i s+ -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x01
|
||||
# Not sure if this will work. Encapsulation is a problem period
|
||||
|
||||
ipt -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2 # tcp tunnels need ordering
|
||||
ipt -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2${IPT_MASK_STRING} # tcp tunnels need ordering
|
||||
|
||||
# Emanating from router, do a little more optimization
|
||||
# but don't bother with it too much.
|
||||
|
|
|
@ -19,19 +19,24 @@
|
|||
|
||||
# You need to jiggle these parameters. Note limits are tuned towards a <10Mbit uplink <60Mbup down
|
||||
|
||||
. /usr/lib/sqm/functions.sh
|
||||
#sm: Goal to create a set of tc filters that also apply on pppoe encapsulated packets
|
||||
# but having multiple filters run in succession is slow, so look at tc filter hashing
|
||||
# (this should help cut down the number of OPs per packet considerably)
|
||||
|
||||
|
||||
. /usr/lib/sqm/functions.sh
|
||||
#sqm_logger IPT_MASK: ${IPT_MASK_STRING}
|
||||
ipt_setup() {
|
||||
|
||||
ipt -t mangle -N QOS_MARK_${IFACE}
|
||||
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -j MARK --set-mark 0x2
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -j MARK --set-mark 0x2${IPT_MASK_STRING}
|
||||
# You can go further with classification but...
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS1 -j MARK --set-mark 0x3
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS6 -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class EF -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class AF42 -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m tos --tos Minimize-Delay -j MARK --set-mark 0x1
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS1 -j MARK --set-mark 0x3${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class CS6 -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class EF -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m dscp --dscp-class AF42 -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
ipt -t mangle -A QOS_MARK_${IFACE} -m tos --tos Minimize-Delay -j MARK --set-mark 0x1${IPT_MASK_STRING}
|
||||
|
||||
# and it might be a good idea to do it for udp tunnels too
|
||||
|
||||
|
@ -39,20 +44,20 @@ ipt -t mangle -A QOS_MARK_${IFACE} -m tos --tos Minimize-Delay -j MARK --set-ma
|
|||
|
||||
if [ "$SQUASH_DSCP" = "1" ]
|
||||
then
|
||||
sqm_logger "Squashing differentiad services code points (DSCP) from ingress."
|
||||
sqm_logger "Squashing differentiated services code points (DSCP) from ingress."
|
||||
ipt -t mangle -I PREROUTING -i $IFACE -m dscp ! --dscp 0 -j DSCP --set-dscp-class be
|
||||
else
|
||||
sqm_logger "Keeping differentiad services code points (DSCP) from ingress."
|
||||
ipt -t mangle -A PREROUTING -i $IFACE -m mark --mark 0x00 -g QOS_MARK_${IFACE}
|
||||
ipt -t mangle -A PREROUTING -i $IFACE -m mark --mark 0x00${IPT_MASK_STRING} -g QOS_MARK_${IFACE}
|
||||
fi
|
||||
|
||||
ipt -t mangle -A POSTROUTING -o $IFACE -m mark --mark 0x00 -g QOS_MARK_${IFACE}
|
||||
ipt -t mangle -A POSTROUTING -o $IFACE -m mark --mark 0x00${IPT_MASK_STRING} -g QOS_MARK_${IFACE}
|
||||
|
||||
# The Syn optimization was nice but fq_codel does it for us
|
||||
# ipt -t mangle -A PREROUTING -i s+ -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -j MARK --set-mark 0x01
|
||||
# Not sure if this will work. Encapsulation is a problem period
|
||||
|
||||
ipt -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2 # tcp tunnels need ordering
|
||||
ipt -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2${IPT_MASK_STRING} # tcp tunnels need ordering
|
||||
|
||||
# Emanating from router, do a little more optimization
|
||||
# but don't bother with it too much.
|
||||
|
@ -65,25 +70,27 @@ ipt -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-cl
|
|||
}
|
||||
|
||||
|
||||
MYBURST=1600 #sm: make burst and cburst as well as quantum configurable for ingress and egress in the GUI
|
||||
# TC rules
|
||||
|
||||
egress() {
|
||||
|
||||
CEIL=${UPLINK}
|
||||
PRIO_RATE=`expr $CEIL / 3` # Ceiling for prioirty
|
||||
PRIO_RATE=`expr $CEIL / 3` # Ceiling for priority
|
||||
BE_RATE=`expr $CEIL / 6` # Min for best effort
|
||||
BK_RATE=`expr $CEIL / 6` # Min for background
|
||||
BE_CEIL=`expr $CEIL - 16` # A little slop at the top
|
||||
|
||||
LQ="quantum `get_mtu $IFACE $CEIL`"
|
||||
HTB_BURSTS="burst ${MYBURST} cburst ${MYBURST}"
|
||||
|
||||
$TC qdisc del dev $IFACE root 2> /dev/null
|
||||
$TC qdisc add dev $IFACE root handle 1: `get_stab_string` htb default 12
|
||||
$TC class add dev $IFACE parent 1: classid 1:1 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:10 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit prio 0 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:11 htb $LQ rate 128kbit ceil ${PRIO_RATE}kbit prio 1 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:12 htb $LQ rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:13 htb $LQ rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1: classid 1:1 htb $LQ ${HTB_BURSTS} rate ${CEIL}kbit ceil ${CEIL}kbit `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:10 htb $LQ ${HTB_BURSTS} rate ${CEIL}kbit ceil ${CEIL}kbit prio 0 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:11 htb $LQ ${HTB_BURSTS} rate 128kbit ceil ${PRIO_RATE}kbit prio 1 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:12 htb $LQ ${HTB_BURSTS} rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
||||
$TC class add dev $IFACE parent 1:1 classid 1:13 htb $LQ ${HTB_BURSTS} rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
||||
|
||||
$TC qdisc add dev $IFACE parent 1:11 handle 110: $QDISC `get_limit ${ELIMIT}` `get_target "${ETARGET}" ${UPLINK}` `get_ecn ${EECN}` `get_quantum 300` `get_flows ${PRIO_RATE}` ${EQDISC_OPTS}
|
||||
$TC qdisc add dev $IFACE parent 1:12 handle 120: $QDISC `get_limit ${ELIMIT}` `get_target "${ETARGET}" ${UPLINK}` `get_ecn ${EECN}` `get_quantum 300` `get_flows ${BE_RATE}` ${EQDISC_OPTS}
|
||||
|
@ -301,6 +308,7 @@ BK_RATE=`expr $CEIL / 6` # Min for background
|
|||
BE_CEIL=`expr $CEIL - 16` # A little slop at the top
|
||||
|
||||
LQ="quantum `get_mtu $IFACE $CEIL`"
|
||||
HTB_BURSTS="burst ${MYBURST} cburst ${MYBURST}"
|
||||
|
||||
$TC qdisc del dev $IFACE handle ffff: ingress 2> /dev/null
|
||||
$TC qdisc add dev $IFACE handle ffff: ingress
|
||||
|
@ -313,18 +321,18 @@ sqm_logger "Do not perform DSCP based filtering on ingress. (1-tier classificati
|
|||
# Revert to no dscp based filtering
|
||||
$TC qdisc del dev $DEV root 2>/dev/null
|
||||
$TC qdisc add dev $DEV root handle 1: `get_stab_string` htb default 10
|
||||
$TC class add dev $DEV parent 1: classid 1:1 htb $LQ rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:10 htb $LQ rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit prio 0 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1: classid 1:1 htb $LQ ${HTB_BURSTS} rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:10 htb $LQ ${HTB_BURSTS} rate ${DOWNLINK}kbit ceil ${DOWNLINK}kbit prio 0 `get_htb_adsll_string`
|
||||
$TC qdisc add dev $DEV parent 1:10 handle 110: $QDISC `get_limit ${ILIMIT}` `get_target "${ITARGET}" ${DOWNLINK}` `get_ecn ${IECN}` `get_flows ${DOWNLINK}` ${IQDISC_OPTS}
|
||||
|
||||
else
|
||||
sqm_logger "Perform DSCP based filtering on ingress. (3-tier classification)"
|
||||
$TC qdisc add dev $DEV root handle 1: `get_stab_string` htb default 12
|
||||
$TC class add dev $DEV parent 1: classid 1:1 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:10 htb $LQ rate ${CEIL}kbit ceil ${CEIL}kbit prio 0 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:11 htb $LQ rate 32kbit ceil ${PRIO_RATE}kbit prio 1 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:12 htb $LQ rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:13 htb $LQ rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1: classid 1:1 htb $LQ ${HTB_BURSTS} rate ${CEIL}kbit ceil ${CEIL}kbit `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:10 htb $LQ ${HTB_BURSTS} rate ${CEIL}kbit ceil ${CEIL}kbit prio 0 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:11 htb $LQ ${HTB_BURSTS} rate 32kbit ceil ${PRIO_RATE}kbit prio 1 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:12 htb $LQ ${HTB_BURSTS} rate ${BE_RATE}kbit ceil ${BE_CEIL}kbit prio 2 `get_htb_adsll_string`
|
||||
$TC class add dev $DEV parent 1:1 classid 1:13 htb $LQ ${HTB_BURSTS} rate ${BK_RATE}kbit ceil ${BE_CEIL}kbit prio 3 `get_htb_adsll_string`
|
||||
|
||||
# I'd prefer to use a pre-nat filter but that causes permutation...
|
||||
|
||||
|
|
Loading…
Reference in a new issue