Difuse/packages
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
packages/net/mdio-tools/Makefile

44 lines
1 KiB
Makefile
Raw Permalink Normal View History

mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
include $(TOPDIR)/rules.mk
PKG_NAME:=mdio-tools
mdio-tools: update to 1.2.0 Update the mdio-netlink kmod and userspace mdio-tools to version 1.2.0. This allows dropping the time64 musl patch which was upstreamed. [v1.2.0] - 2022-09-15 --------------------- - mdio: A new addressing mode "mmd-c22": Used to access MMDs attached to MDIO controllers without Clause 45 support by using registers 13 and 14 in the device's Clause 22 register space - mdio: Pretty print gigabit link capability information from a PHY's extended status register - mdio: Pretty print lots of status information from MMDs (C45 PHYs) - mvls: Decode priority override information of ATU entries - mvls: Table listings now always prints out the device information, even on single chip systems. Signed-off-by: Robert Marko <robimarko@gmail.com>
2022-09-19 17:50:16 +00:00
PKG_RELEASE:=1
mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
PKG_SOURCE_URL:=https://github.com/wkz/mdio-tools
PKG_SOURCE_PROTO:=git
mdio-tools: update to 1.3.1 Update the mdio-netlink kmod and userspace mdio-tools to version 1.3.1. [v1.3.1] - 2023-12-02 --------------------- Fixes mvls to work with kernels 6.2 and onwards. - mdio: Multiple registers can now be dumped at once, via the generic dump operation. - mvls: Relax the driver matching to accept the strings used in kernels 6.2 and newer. Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-12-20 12:51:23 +00:00
PKG_SOURCE_VERSION:=1.3.1
PKG_MIRROR_HASH:=b7973284dc3dffef4bd2a904e3f7aa7fd3caab4aecf85ac57488f5acbf341aba
mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
PKG_FIXUP:=autoreconf
PKG_LICENSE:=GPL-2.0-only
PKG_LICENSE_FILES:=COPYING
PKG_MAINTAINER:=Damien Mascord <tusker@tusker.org>
include $(INCLUDE_DIR)/package.mk
define Package/mdio-tools
SECTION:=net
CATEGORY:=Utilities
TITLE:=mdio-tools Linux MDIO register access
URL:=https://github.com/wkz/mdio-tools.git
mdio-tools: add kmod-mdio-netlink as dependencies Otherwise it will fail as follows: failed to find a module named mdio-netlink ERROR: mdio-netlink module not detected, and could not be loaded. Run-tested on: ramips/mt7621 Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2022-04-02 14:28:26 +00:00
DEPENDS:=+kmod-mdio-netlink +libmnl
mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
endef
define Package/mdio-tools/description
mdio-tools: upgrade to latest commit Also fix minor style issues. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2021-07-21 20:24:45 +00:00
mdio-tools Linux MDIO register access
mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
endef
define Package/mdio-tools/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mdio/mdio $(1)/usr/bin/
mdio-tools: include mvls mdio-tools have a app dedicated to reading Marvell Link Street switch properties which is really usefull to not have to manually do it via MDIO. So, install the mvls binary as well. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
2022-06-07 12:18:15 +00:00
$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mvls/mvls $(1)/usr/bin/
mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
endef
mdio-tools: fix buildbot build On buildbots the build fails because git isn't finding any git repo and then AC_INIT refuses to run: fatal: not a git repository (or any parent up to mount point /) Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set). configure.ac:5: error: AC_INIT should be called with package and version arguments Address this by substituting the git command with $(PKG_VERSION). Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
2021-08-23 19:13:42 +00:00
define Build/Prepare
$(call Build/Prepare/Default)
$(SED) 's/m4_esyscmd_s(.*)/$(PKG_VERSION)/' $(PKG_BUILD_DIR)/configure.ac
endef
mdio-tools: Add package plus kernel module mdio is a low-level Linux debug tool for communicating with devices attached an MDIO bus. It improves on existing tools in this space in a few important ways: MDIO buses are directly addressable. Previous solutions relied on at least one Ethernet PHY on the bus being attached to a net device, which is typically not the case when the device is an Ethernet switch for example. Complex operations can be performed atomically. The old API only supported a single read or write of a single register. mdio sends byte code to the mdio-netlink kernel module that can perform multiple operations, store intermediate values, loop etc. As a result, things like read/mask/write operations and accesses to paged PHYs can be performed safely. Signed-off-by: Damien Mascord <tusker@tusker.org>
2021-07-13 01:30:09 +00:00
$(eval $(call BuildPackage,mdio-tools))
Reference in a new issue Copy permalink