Openwrt theme apparently accepsts slightly different html than
Bootstrap or Material. Cahnge code to <br /> to make it compatible.
This fixes#1011
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The default hostapd/wpad mini version does not support ieee80211w
and the option's visibility in LuCI may lead it to be placed in user's
/etc/config/wireless preventing wifi from starting.
Check for hostapd/wpad full before exposing the option.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
luci ignores only 127.0.0.1 in real time connections.
The dnsmasq.init script sets up resolv.conf(s) as such.
With alternate DNS servers configured 'localhost' will
resolve to '127.0.0.1' or '::1'. The connections graph
will spam itself. openwrt/luci#996
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Add support for IEEE802.11w Management Frame Protection options.
Mention in the help text that the full version of wpad/hostapd is
needed.
Currently supported by ath9k and ath10k, and in LEDE also by
mwlwifi and mt76.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Add WPA/WPA2-PSK mixed mode to the list of allowed modes
* Add datatype validation to some fields
* Add help texts
* Reformat longest lines
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for 802.11r fast transition to luci.
Corrects the deletion on nasid in issue #844
The R0KH & R1KH options are not perfect as it would be better
to separate out each option and do some sanity checking on
the values, but that is beyond my capabilities.
Signed-off-by: Warren Linton warren@linton.id.au
(squashed from three original commits in #994. commit message reworded)
The same wifi option 'nasid' is used for two purposes,
RADIUS NAS ID and 802.11r NAS ID / R0KH-ID.
In LuCI the 'nasid' option has depended on WPA-EAP/WPA2-EAP, which
can lead to accidental deletion of the option, if the user modifies
any wifi settings while he has WPA(2)-PSK & 802.11r mode.
802.11r can also be with WPA(2)-PSK, so add them to the dependency
list of allowed encryptions.
(Note: after this fix the 'nasid' field is shown unnecessarily
to "normal" WPA(2)-PSK users. It might later be set to depend on
802.11r being used, after 802.11r has been added to LuCI.)
Reference to bugs:
https://github.com/openwrt/luci/issues/844https://dev.openwrt.org/ticket/20764https://bugs.lede-project.org/index.php?do=details&task_id=274
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The previous commit erroneously used "ports" instead of "port" as name for the
option widget, causing wrong uci values to be written.
Also work around some cbi idiosyncrasies regarding MultiValue widgets which
prevented rendering the correct initial selection state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
Move the password setting into the .parse() callback to ensure that it is
updated regardless of whether "Save" or "Save & Apply" has been pressed.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Reloading the page ensures that the allowed tx power values and channel select
lists are properly populated with the new effective values.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fixed some display problems where the UUID label of the drop down
list does not exist and the positions of other labels are misplaced
in mount settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Fixed an issue where the network name is displayed as "%q" on wlan
connection destination network settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
When a lease objects expires property is set to "false", its expiry time is
unlimited, so adjust the templates to properly display that state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
We're currently just setting system time, but we don't set battery
backed RTC. Time in the RTC is only set on the graceful shutdown, which
is quite hard to achieve on embedded devices.
In other words, on systems with battery backed RTC we currently don't
handle following use case properly:
1. Set system time from web UI (sets only system time, but not RTC)
2. Unplug the device from power
Then after the reboot, we've wrong system time again, because time set
in [1] is not saved to battery backed RTC.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Specify reasonable sizes for metric and MTU fields to
prevent the table from being too wide.
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Instead of defaulting to replace, even on hardware that supports multi
SSID, make the default to add. This reduces the chance of locking
oneself out when adding a second network. If you intended to replace,
ending up with two networks then deleting one is easier than recovering
when the old network configuration is gone.
Signed-off-by: Karl Palsson <karlp@etactica.com>
After clicking the "join" button on the scan list, the SSID is no longer
visible, though it's kept in the form to pass to the server.
Show the chosen SSID on the top of the page, to help people confirm that
they're joining the right network.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Simplify the sysupgrade image checksum strings in order to
avoid translating "Checksum xxx" items both for MD5 and SHA256.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Show also the sha256 checksum in addition to MD5 checksum to enable
image verification also for builds with only sha256 checksums.
If the 'sha256sum' command is not present in the system, the value
remains empty.
Note: The easiest way to get the 'sha256sum' command is to compile it
into busybox.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fix incomplete port status display on vlan setup page when ports in the middle
are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so
JS code should not attempt to reference an undefined status element for port 3.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use a generic default topology if we cannot infer switch information from
board.json and display an error message in this case. Should fix#779 and
similar issues.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Gracefully handle a missing diag section in /etc/config/luci when rendering
the network diagnostics tool page.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When a wireless network is disabled it can't be removed. From
wifi_overview.htm the delete call is generated as wlan0, wlan1 or
whatever. This wlan is not working because it is disabled, then LuCI
deletes the virtual radio which really is named as wlan0.
Replace the menu item "Wifi" by "Wireless",
which is already used for page and section headings
This closes#695
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This pull request adds a condition, which checks whether the file "/etc/config/fstab" exists before it allows access to "mount points".
Signed-off-by: Guido Lipke <lipkegu@gmail.com>
Add support for dnsmasq uci options 'quietdhcp' and 'sequential_ip'
(disable logging, allocate ip addresses sequentially)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This patch fixes the wrong visualization of Noise Margin (SNR) and Signal Attenuation (SATN) stats
Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
