Instead of defaulting to replace, even on hardware that supports multi
SSID, make the default to add. This reduces the chance of locking
oneself out when adding a second network. If you intended to replace,
ending up with two networks then deleting one is easier than recovering
when the old network configuration is gone.
Signed-off-by: Karl Palsson <karlp@etactica.com>
After clicking the "join" button on the scan list, the SSID is no longer
visible, though it's kept in the form to pass to the server.
Show the chosen SSID on the top of the page, to help people confirm that
they're joining the right network.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Use a generic default topology if we cannot infer switch information from
board.json and display an error message in this case. Should fix#779 and
similar issues.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add support for dnsmasq uci options 'quietdhcp' and 'sequential_ip'
(disable logging, allocate ip addresses sequentially)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Fix dhcpv6 ra_management option's handling of "stateless" value.
Default value for the option is 1, so trying to store ""
instead of "0" for stateless is not working.
This fixes#676
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Enable setting a host-specific lease time for static hosts.
Format is similar as for the default lease time: e.g. 2m, 12h, 3d, infinite
Default lease time is used for all hosts without host-specific definition.
Support for the option was added to Openwrt trunk by r48801:
https://dev.openwrt.org/changeset/48801
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* add more WPA-EAP phase2 authentication methods.
* client cert, client key and key password are only relevant for
WPA EAP-TLS, change dependency accordingly.
* add support for certificates and key for EAP-TLS phase2 auth.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Some applications only support ipv4 so add ipv4only option
to host and hostport datatypes so that for thos applications
that when an IP address is specified only and ipv4 ip address
gets accepted.
Limit the name of a new interface to 15 characters.
Add a note about the maximum length and the automatic protocol/bridge
prefixes (br-, 6in4-, pppoe- etc.).
Reference to:
https://dev.openwrt.org/ticket/20380https://github.com/openwrt/luci/issues/507
There is a 15 character limit to the "real" interface name,
enforced both in the firewall and dnsmasq. The real interface name
includes the possible prefix "br-", "6in4-" etc. Example of an error:
interface name `br-lan_protected' must be shorter than IFNAMSIZ (15)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Rename subdirectories to their repective OpenWrt package names
* Make each LuCI module its own standalone package
* Deploy a shared luci.mk which is used by each module Makefile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
