The length of DUID-LL is 80 bits (16 bit DUID type, 16 bit hardware type, 48 bit mac)
which corresponds to 20 nibbles. Also lower the minimum required length of DUID to
20 nibbles in order to allow entering a DUID-LL.
Signed-off-by: Arjen de Korte <build+github@de-korte.org>
In case the DUID can be mapped to the MAC-Address of an already known
host, show the already know hostname next to the DHCPv6 supplied one in
case they differ.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Don't show a DHCPv6 supplied hostname if none was send. It happens in
case the DUID can be mapped to the MAC-Address of an existing host and
the existing host has a name set.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Don't replace the DHCPv6 supplied hostname if the DUID can be mapped to
the MAC-Address of an already known host.
It hides the issue of a missing DHCPv6 hostname and could lead to the
conclution that the already known host has an IPv6 address.
Signed-off-by: Mathias Kresin <dev@kresin.me>
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
When a lease objects expires property is set to "false", its expiry time is
unlimited, so adjust the templates to properly display that state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fix incomplete port status display on vlan setup page when ports in the middle
are not used, e.g. some Lantiq boards use ports 0, 1, 2 and 4 for LAN ports so
JS code should not attempt to reference an undefined status element for port 3.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Gracefully handle a missing diag section in /etc/config/luci when rendering
the network diagnostics tool page.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When a wireless network is disabled it can't be removed. From
wifi_overview.htm the delete call is generated as wlan0, wlan1 or
whatever. This wlan is not working because it is disabled, then LuCI
deletes the virtual radio which really is named as wlan0.
Map DUIDs to their corresponding MAC addresses in order to correlate them with
IPv4 information. This is useful to e.g. identify IPv6 hosts which do not send
a name.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Copy the changes made by f8d0ba00b2
also to the interface details pages in order to clarify display of
multiple addresses.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
For better view of 'Interface Overview' IPv4/IPv6 addresses for
interfaces should be displayed as lists, but not as comma separated
strings.
Signed-off-by: Alexander Logger <intagger@gmail.com>
* Rename subdirectories to their repective OpenWrt package names
* Make each LuCI module its own standalone package
* Deploy a shared luci.mk which is used by each module Makefile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
