The length of DUID-LL is 80 bits (16 bit DUID type, 16 bit hardware type, 48 bit mac)
which corresponds to 20 nibbles. Also lower the minimum required length of DUID to
20 nibbles in order to allow entering a DUID-LL.
Signed-off-by: Arjen de Korte <build+github@de-korte.org>
Fixes [FS#1118](https://bugs.lede-project.org/index.php?do=details&task_id=1118)
Luci chokes on devices that do not have _iptables_ installed with:
/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute function dispatcher target for entry '/'.
The called action terminated with an exception:
/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute firstchild dispatcher target for entry '/admin'.
The called action terminated with an exception:
/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute function dispatcher target for entry '/admin/status'.
The called action terminated with an exception:
/usr/lib/lua/luci/dispatcher.lua:460: Failed to execute template dispatcher target for entry '/admin/status/overview'.
The called action terminated with an exception:
/usr/lib/lua/luci/template.lua:97: Failed to execute template 'admin_status/index'.
A runtime error occured: [string "/usr/lib/lua/luci/view/admin_status/index.h..."]:34: bad argument #1 to 'tonumber' (string expected, got nil)
stack traceback:
[C]: in function 'assert'
/usr/lib/lua/luci/dispatcher.lua:460: in function 'dispatch'
/usr/lib/lua/luci/dispatcher.lua:141: in function </usr/lib/lua/luci/dispatcher.lua:140>
The code should be more defensive.
In case the DUID can be mapped to the MAC-Address of an already known
host, show the already know hostname next to the DHCPv6 supplied one in
case they differ.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Don't show a DHCPv6 supplied hostname if none was send. It happens in
case the DUID can be mapped to the MAC-Address of an existing host and
the existing host has a name set.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Don't replace the DHCPv6 supplied hostname if the DUID can be mapped to
the MAC-Address of an already known host.
It hides the issue of a missing DHCPv6 hostname and could lead to the
conclution that the already known host has an IPv6 address.
Signed-off-by: Mathias Kresin <dev@kresin.me>
As suggested by PR #1114, use `/proc/sys/net/netfilter/nf_conntrack_count`
instead of counting the lines in `/proc/net/nf_conntrack` but use a slightly
more efficient approach which avoids spawning an extra `cat` command.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
luci ignores only 127.0.0.1 in real time connections.
The dnsmasq.init script sets up resolv.conf(s) as such.
With alternate DNS servers configured 'localhost' will
resolve to '127.0.0.1' or '::1'. The connections graph
will spam itself. openwrt/luci#996
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
When a lease objects expires property is set to "false", its expiry time is
unlimited, so adjust the templates to properly display that state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This patch fixes the wrong visualization of Noise Margin (SNR) and Signal Attenuation (SATN) stats
Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>
When kmod-nf-nat6 and kmod-ipt-nat6 are installed, the firewall has also
the 'nat' table for ipv6, and packages like 'adblock' utilize that table.
Currently that table is not shown on the Luci firewall status page,
although it is visible by 'ip6tables -L -v -t nat' from console.
Detect 'nat' table's presence from /proc/net/ip6_tables_names
Show 'nat' table in Status->Firewall->IPv6 if that table is present.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This adds a lot of new status information about the dsl line.
It now looks like this on a Telekom line:
Status: UP
Line State: showtime_tc_sync [0x801]
Line Mode: G.993.2 (VDSL2)
Annex: B
Profile: 17a
Data Rate: 51.391 Mb/s / 10.046 Mb/s
Max. Attainable Data Rate (ATTNDR): 63.817 Mb/s / 23.908 Mb/s
Latency: 4.0 ms / 8.0 ms
Line Attenuation (LATN): 10.5 dB / 9.9 dB
Signal Attenuation (SATN): 8.2 dB / 14.4 dB
Noise Margin (SNR): 10.5 dB / 9.7 dB
Aggregate Transmit Power(ACTATP): -14 dB / 12.4 dB
Forward Error Correction Seconds (FECS): 1 / 1723485
Errored seconds (ES): 0 / 2477
Severely Errored Seconds (SES): 0 / 50
Loss of Signal Seconds (LOSS): 0 / 0
Unavailable Seconds (UAS): 31 / 31
Header Error Code Errors (HEC): 0 / 0
Non Pre-emtive CRC errors (CRC_P): 0 / 0
Pre-emtive CRC errors (CRCP_P): 0 / 0
Line Uptime: 2m 3s
ATU-C System Vendor ID: Broadcom 176.15
Power Management Mode: L0 - Synchronized
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Map DUIDs to their corresponding MAC addresses in order to correlate them with
IPv4 information. This is useful to e.g. identify IPv6 hosts which do not send
a name.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Only attempt to call "dsl_func" if the dsl_control lucistat output could be
successfully evaluated.
Works around https://dev.openwrt.org/ticket/20607
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Fetch the required information via ubus instead of relying on the
to-be-removed luci.sys.sysinfo() and luci.sys.loadavg() functions.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
* Rename subdirectories to their repective OpenWrt package names
* Make each LuCI module its own standalone package
* Deploy a shared luci.mk which is used by each module Makefile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
