It is legal to have two device sections referring to the same netdev if one
section is a declaration (a section setting option type) and the other is
a configuration (a section not specifying a type but matching an existing
netdev).
Support this case in LuCI since it might be required for some complex
device setups.
Additionally, fix the device type determination for device configuration
sections without type, those should be treated as ethernet (a.k.a.
simple device) configuration instead of falling back to the underlying
netdev device type.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add the known values returned for 802.11ax HW as well as HT modes to the
respective method descriptions.
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit adds the ability to configure HE-modes for radios
(HE20 / HE40 / HE80 / HE160) as well as HE rate information in the
assiciation view.
Tested-on: Ubiquiti UniFi 6 Lite / LR
Signed-off-by: David Bauer <mail@david-bauer.net>
Add support for parsing 11ax modes returned from UBUS. This is required
so the frontend can display information about supported 11ax operation.
Signed-off-by: David Bauer <mail@david-bauer.net>
Treat not explicitly configured, preexisting VLAN interfaces as simple
network devices when adding configuration for them, since it is more
likely that people want to set general device properties such as MAC
address instead of reconfiguring ingress/egress QoS mapping, which is
the only editable property of preexisting VLAN device config dialogs.
Ref: https://github.com/openwrt/luci/issues/5102
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Do not run the uci-defaults scripts of a package in the package-postinst, but leave this
for the default_postinst() of the OpenWrt base-files package.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
- Condense overly large IPv6 RA/DHCPv6 description texts and get rid of most embedded markup
- Switch ra/ndp/dhcpv6 mode selections to rich dropdown lists and move extended choice
descriptions next to the selection options
- Drop ndproxy_static option which has been removed from odhcpd long ago
- Add format validations to all text input fields
- Add ability to configure master/relay modes for non-static interfaces (#2998)
- Move extended RA configuration options into a new tab
- Prevent enabling master mode on multiple interfaces
- Prevent enabling ra/dhcpv6 server mode on non-static or master interfaces
- Drop ra_management in favor to ra_flags option (#5083)
- Add support for dns_service option
- Read current effective IPv6 MTU and hop limit placeholder values from procfs
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Rework some further code instances to fall back to the legacy ipv4/ipv6
properties if needed.
Fixes: c7b7b42cd3 ("treewide: Update JS using luci-rpc getHostHints")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The iptables mark field is 32 bits wide, which is 4 bytes and so 8 hex
characters. Fix the fwmark validation to allow 8 characters in the hex
string.
Fixes: #5098
Suggested-by: Robert <32970961+differentblue@users.noreply.github.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Update frontend JS code which uses luci-rpc getHostHints to support the new
response format which removes the `ipv4` and `ipv6` host hint string fields
and replaces them with `ipaddrs` and `ip6addrs` weighted string list fields.
Signed-off-by: Niels Widger <niels@qacafe.com>
[rework code to be forwards/backwards compatible, fix some Network.Hosts
methods, fix IP choice ordering, change commit subject, rewrap commit
message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Update luci-rpc's getHostHints method to return two string arrays for
each host, `ipaddrs` and `ip6addrs`, each containing the host's IPv4
and IPv6 addresses, respectively. Each array is sorted by a priority
derived from the source from which the address was discovered. The
current address sources and their priority is as follows (a
higher (larger) priority is listed first):
- neighbor table entries: 10
- /etc/ethers entries: 50
- DHCP leasefile: 100
- RRDNS queries: 100
- getifaddrs(): 200
- UCI static leases: 200
The existing `ipv4` and `ipv6` string fields for each host in
`getHostHints` has been removed. Downstream users of getHostHints
still need to be updated.
Fixes: #4838
Signed-off-by: Niels Widger <niels@qacafe.com>
[squash commits, reformat fixes tag]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
When including luci.mk in external repos it's sometimes usefull to not use
the default LuCI-submenu hierarchy.
This change defines the LUCI_SUBMENU_FORCED variable which completely overrides
the default submenu of the LuCI config-section. When LUCI_SUBMENU_FORCED is not
defined, the default submenu derrived from LUCI_TYPE or "Application" fallback
is used.
Defining LUCI_SUBMENU_FORCED in the package Makefile will just use this value.
Setting it to "none" will not define a submenu at all.
Together with LUCI_SECTION and LUCI_CATEGORY menu items can now created at any
place in the menu structure.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Add the LUCI_URL and LUCI_MAINTAINER variables to pass them to the buildpackage
defines. Give them some sane defaults and allow overwritting by the individual
package.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
This is required to resolve clashes with the generic "option device"
referring to netdev names in current netifd versions.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This is required to resolve conflicts with the existing "device" option
in other proto handlers such as PPP or QMI where "device" refers to the
device path of the tty control device instead of a netdev name.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
If different options point to the same underlying uci option, we must only
remove the uci value if none of the other alias options is active in order
to prevent inactive options (due to unsatisfied depends) removing the uci
value of active once on save.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
It got accidentally added when additional RA and NDP parameters
were added.
Fixes: 504bdb23fb ("luci-mod-network: Introduce new RA and NDP params...")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This commit effectively reverts the change made with
907b4222f7 ("luci-mod-network: don't hide "Device" on protocol change").
Floating tunnel protocols such as 6in4, plain PPP over modem device,
VPNC etc. do not have any layer 2 device at all, for such protocols the
device selector should be hidden.
Also swap back the incorrect option order introduced with commit
b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges").
Since device depends on proto, it should come after the protocol selection,
not before.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Commit b7f3cf66ca "luci-mod-network: drop support for *adding* legacy bridges"
dropped the protocol dependcies of the ifname/device selector in the add new
interface dialog.
Re-add the required dependencies and swap the order of the protocol and
device inputs while we're at it since latter depends on the former.
Fixes: b7f3cf66ca ("luci-mod-network: drop support for *adding* legacy bridges")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Since `uci.get()` may return null or array values, we cannot blindly call
split() on the result. Use the safe `L.toArray()` helper which is intended
to deal with such situations.
Also clean up whitespace while we're at.
Fixes: #5080
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Problem with handling all migrations in 1 step is that uci.sections()
doesn't include changes queued using uci.callAdd() and uci.callSet().
That could result in unexpected behaviour and generating invalid
configs.
For the sake of simplicity and reliability use 2 steps migration. The
downside is that users may get prompted twice to migrate.
Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes: 74be304e54 ("treewide: use "device" option in UCI "interface" sections")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Those are L2 options that are not part of interfaces (L3), should not be
set there and don't work. Setting MAC and MTU should be done at device
layer (config device) and is supported for basic types already.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Checking netifd version is important for users of the most recent LuCI
that didn't update netifd (e.g. OpenWrt package).
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
LuCI supports only the newer method of specifying bridge ports using the
"ports" option. Offer users migration so they can configure their
network.
Example:
1. Before
config device
option name 'br-lan'
option type 'bridge'
list ifname 'lan1'
list ifname 'lan2'
list ifname 'lan3'
list ifname 'lan4'
2. After
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
