Due to a lack of a test environment this support only covers thermal graphs
so far. Please send the output of "rrdtool info /tmp/rrd/*/sensors-*/*.rrd"
if your system happens to support voltage, power or fanspeed sensors.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
If a plugin produces only one instance, e.g. netlink with just one interface
configured, then the controller will register no detail views which would
normally show all graphs but the index pacage of a given plugin will still
display the collapsed view without any possibility to reach the full listing.
Fix the problem by only rendering a linked index view when more than one
instance is present.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Reorganise the menu items of the Luci statistics module:
* Re-label "Collectd" to "Setup" and place it after the "Graphs" items.
- "Graphs" is used much more frequently so it should be first.
- Change "Collectd" menu item to "Setup" to clarify things.
* Re-label "System plugins" to "General plugins" to change sorting.
"Network / Output / System" changes to "General / Network / Output"
that is more logical order for the items.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
At some point since I last checked, the nut plugin for collectd changed the
names of the timeleft and percent datasets. Update the luci module to match
so that those graphs are generated correctly again.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Switch the zonename validation to use
a compound datatype "and(uciname,maxlength(14))"
instead of a separate 'validate' function.
Remove the unnecessary function that was introduced by 34e875b
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Both init.d and uci-defaults scripts included in luci-app-statistics
still contained stuff related to lucid, which package was removed by
91b97bc9f6
Changes to scripts:
* init.d: lucid reference removed,
/var/etc creation moved earlier (before first possible use)
* uci-defaults: lucid parameters & restart removed
(but busybox httpd stuff was left intact, although it might be unnecessary)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Mark luci-app-multiwan @BROKEN, as it depends on the old 'multiwan'
package, located in the deprecated 'oldpackages' feed.
'packages' feed contains both 'mwan3' and 'luci-app-mwan3' apps that
have superseded the old packages.
This should fix#395.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust default settings to match the plugins installed by default
(default plugins: iwinfo, interface, load)
* disable plugins not installed by default to avoid error messages at start
* remove references to Freifunk interfaces, as most users do not have those
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
No functional changes, but the file is reorganised:
* group settings: general settings / output plugins / input plugins
* sort settings inside a group
* remove quotes from option names to match the current uci behaviour
* whitespace corrections
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Clarify the CPU time consumption graph by removing the "idle" data from it.
Especially with light traffic, removing "idle" enables the graph
to scale better and to properly show the CPU load variations.
If "idle" data needs to be seen, it might be added as a second graph below.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Clarify the short explanation on the statistics section's front page.
* Mention the possibility of additional collectd plugins to get more stats.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Utilise alt_autoscale_max to make the memory chart y-axis to scale better
for devices with e.g. 128 MB RAM.
Also fix the axis min value to 0.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Implement support for alternative scaling of the y-axis.
By default, rrdtool will autoscale to 1,2,5,10,20,50,100,200,... etc.,
which is not always suitable (e.g. memory charts for device with 128 MB).
Rrdtool 1.0.50 already supports alternative autoscaling that creates
a tighter y-axis. Implement graph-level options in Luci statistics to
support those boolean options as "alt_autoscale" and "alt_autoscale_max".
info at http://oss.oetiker.ch/rrdtool/doc/rrdgraph.en.html
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
CPU plugin in the Luci statistics was missing the label definitions,
so the field labels are like "cpu_system" instead of "System".
Add proper label definitions to CPU (like the other plugins already have).
The statistics graph was also missing softirq and interrupt stats, although colors
for them were defined. Softirq consumes massive amount of CPU especially with
any qos in use, so it is important for the user to see also that data. Add both
softirq and interrupt stats to the graph.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This is useful in client mode as well, since it allows one to use --route-noexec and --up <cmd> or --route-up <cmd> to create routes manually instead of relying on whatever routes vpn server pushes down to the client.
mode=server dependency in luci was introduced together with script_security by mmunz back in 2011.with no explanation in the commit why mode=server was there.
Earlier update to collectd 5.4.1 changed the field from "ping" to "value",
which was changed in the graph definition here, but the label definition
was forgotten. Field's label now reads "ping_IPaddr_value".
Correct the label definition to show only IPaddr like the other two graphs.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Collectd 5.5.0 introduced new data to conntrack plugin:
In addition to the number of tracked connections there is also
the static max conntrack value and the calculated use percentage.
Luci's conntrack plugin intrepretes "conntrack-max" as a new data instance
and includes it in the graph in addition to the real "conntrack" number.
Eliminate "max" from graph by specifying empty "" instance as data source.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The regex used to process the iface query string argument in
vnstat.htm was stripping underscores, which caused the graph not to
display for interfaces with names containing underscores. This
patch adds the underscore to that regex so that the interface name
will be correct and the graph will be displayed.
Signed-off-by: Michael Marley <michael@michaelmarley.com>
Stop sys upgrade automatically disabling miniupnpd on first boot after upgrade.
I spent a lot of time tracking this behaviour down which only occurs if you have luci-app-upnp installed.
Cleanup luci-app-qos, as it still contains references to l7 functionality
that has been removed both from kernel and from qos-scripts.
Qos config page has a non-functional "Service" option and every visit to
qos config page generates currently an error as no l7 files can be found.
daemon.err uhttpd[2285]: find: /etc/l7-protocols/: No such file or directory
Patch removes "Service" option and the l7 file search.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
