Add local generation of PMK when using a PSK.
So 802.11r is easier to configure and no inter AP
communication is needed any more.
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Currently there are only 2 encryption options visible for adhoc
mode. But in netifd, others are also supported and working as
expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed
mode as encryption options.
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
Most users likely want the hostname of a static DHCP lease to be resolveable,
even if the corresponding host is currently offline.
Adjust the form logic to automatically set 'option dns 1' whenever a name is
specified in the static lease entry.
FIxes LEDE FS#815.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This change extends the switch VLAN configuration page to automatically
adjust interface ifname options when altering VLAN settings.
For example "eth0" is changed to "eth0.1" when a previously untagged LAN
VLAN is switched to tagged on the CPU port and vice versa.
Notifications are displayed in the page header if an auto migration was
performed.
This change should make the switch configuration more user friendly and
less prone to soft bricking.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Cron init script starts the service only if a crontab file
exists. If there is no crontab file at boot and the user
later creates one, he needs to manually restart the service.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Prevents deletion of the UCI dns boguspriv keyword and explicitly sets it to
either 0 or removes it as the LEDE/Openwrt dnsmasq.conf default is 1 - not 0.
This allows boguspriv to be turned off from the GUI.
Signed-off-by: Warren Linton <warren@linton.id.au>
[Jo-Philipp Wich: squashed commits, updated commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use the new hostapd functionality (in LEDE) to detect 802.11r and 802.11w
more properly. Leave the old logic in place for Openwrt.
Adjust 802.11w default value from "0" to "" in order to avoid unnecessary
"option ieee80211w 0" lines in /etc/config/wireless
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Openwrt theme apparently accepsts slightly different html than
Bootstrap or Material. Cahnge code to <br /> to make it compatible.
This fixes#1011
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The default hostapd/wpad mini version does not support ieee80211w
and the option's visibility in LuCI may lead it to be placed in user's
/etc/config/wireless preventing wifi from starting.
Check for hostapd/wpad full before exposing the option.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add support for IEEE802.11w Management Frame Protection options.
Mention in the help text that the full version of wpad/hostapd is
needed.
Currently supported by ath9k and ath10k, and in LEDE also by
mwlwifi and mt76.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Add WPA/WPA2-PSK mixed mode to the list of allowed modes
* Add datatype validation to some fields
* Add help texts
* Reformat longest lines
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for 802.11r fast transition to luci.
Corrects the deletion on nasid in issue #844
The R0KH & R1KH options are not perfect as it would be better
to separate out each option and do some sanity checking on
the values, but that is beyond my capabilities.
Signed-off-by: Warren Linton warren@linton.id.au
(squashed from three original commits in #994. commit message reworded)
The same wifi option 'nasid' is used for two purposes,
RADIUS NAS ID and 802.11r NAS ID / R0KH-ID.
In LuCI the 'nasid' option has depended on WPA-EAP/WPA2-EAP, which
can lead to accidental deletion of the option, if the user modifies
any wifi settings while he has WPA(2)-PSK & 802.11r mode.
802.11r can also be with WPA(2)-PSK, so add them to the dependency
list of allowed encryptions.
(Note: after this fix the 'nasid' field is shown unnecessarily
to "normal" WPA(2)-PSK users. It might later be set to depend on
802.11r being used, after 802.11r has been added to LuCI.)
Reference to bugs:
https://github.com/openwrt/luci/issues/844https://dev.openwrt.org/ticket/20764https://bugs.lede-project.org/index.php?do=details&task_id=274
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The previous commit erroneously used "ports" instead of "port" as name for the
option widget, causing wrong uci values to be written.
Also work around some cbi idiosyncrasies regarding MultiValue widgets which
prevented rendering the correct initial selection state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Move the password setting into the .parse() callback to ensure that it is
updated regardless of whether "Save" or "Save & Apply" has been pressed.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Reloading the page ensures that the allowed tx power values and channel select
lists are properly populated with the new effective values.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fixed some display problems where the UUID label of the drop down
list does not exist and the positions of other labels are misplaced
in mount settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Fixed an issue where the network name is displayed as "%q" on wlan
connection destination network settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Specify reasonable sizes for metric and MTU fields to
prevent the table from being too wide.
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Instead of defaulting to replace, even on hardware that supports multi
SSID, make the default to add. This reduces the chance of locking
oneself out when adding a second network. If you intended to replace,
ending up with two networks then deleting one is easier than recovering
when the old network configuration is gone.
Signed-off-by: Karl Palsson <karlp@etactica.com>
After clicking the "join" button on the scan list, the SSID is no longer
visible, though it's kept in the form to pass to the server.
Show the chosen SSID on the top of the page, to help people confirm that
they're joining the right network.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Use a generic default topology if we cannot infer switch information from
board.json and display an error message in this case. Should fix#779 and
similar issues.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Add support for dnsmasq uci options 'quietdhcp' and 'sequential_ip'
(disable logging, allocate ip addresses sequentially)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
