In case the DUID can be mapped to the MAC-Address of an already known
host, show the already know hostname next to the DHCPv6 supplied one in
case they differ.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Don't show a DHCPv6 supplied hostname if none was send. It happens in
case the DUID can be mapped to the MAC-Address of an existing host and
the existing host has a name set.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Don't replace the DHCPv6 supplied hostname if the DUID can be mapped to
the MAC-Address of an already known host.
It hides the issue of a missing DHCPv6 hostname and could lead to the
conclution that the already known host has an IPv6 address.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Allow user to chose if use FT over DS protocol or
FT over the Air protocol for Fast BSS Transition
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Add local generation of PMK when using a PSK.
So 802.11r is easier to configure and no inter AP
communication is needed any more.
Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
Currently there are only 2 encryption options visible for adhoc
mode. But in netifd, others are also supported and working as
expected. So adding WPA-PSK, WPA2-PSK and WPA-PSK/WPA2-PSK Mixed
mode as encryption options.
Signed-off-by: Kishan Gondaliya <kishanpgondaliya@gmail.com>
Most users likely want the hostname of a static DHCP lease to be resolveable,
even if the corresponding host is currently offline.
Adjust the form logic to automatically set 'option dns 1' whenever a name is
specified in the static lease entry.
FIxes LEDE FS#815.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This change extends the switch VLAN configuration page to automatically
adjust interface ifname options when altering VLAN settings.
For example "eth0" is changed to "eth0.1" when a previously untagged LAN
VLAN is switched to tagged on the CPU port and vice versa.
Notifications are displayed in the page header if an auto migration was
performed.
This change should make the switch configuration more user friendly and
less prone to soft bricking.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Cron init script starts the service only if a crontab file
exists. If there is no crontab file at boot and the user
later creates one, he needs to manually restart the service.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Prevents deletion of the UCI dns boguspriv keyword and explicitly sets it to
either 0 or removes it as the LEDE/Openwrt dnsmasq.conf default is 1 - not 0.
This allows boguspriv to be turned off from the GUI.
Signed-off-by: Warren Linton <warren@linton.id.au>
[Jo-Philipp Wich: squashed commits, updated commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
As suggested by PR #1114, use `/proc/sys/net/netfilter/nf_conntrack_count`
instead of counting the lines in `/proc/net/nf_conntrack` but use a slightly
more efficient approach which avoids spawning an extra `cat` command.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Use the new hostapd functionality (in LEDE) to detect 802.11r and 802.11w
more properly. Leave the old logic in place for Openwrt.
Adjust 802.11w default value from "0" to "" in order to avoid unnecessary
"option ieee80211w 0" lines in /etc/config/wireless
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Openwrt theme apparently accepsts slightly different html than
Bootstrap or Material. Cahnge code to <br /> to make it compatible.
This fixes#1011
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The default hostapd/wpad mini version does not support ieee80211w
and the option's visibility in LuCI may lead it to be placed in user's
/etc/config/wireless preventing wifi from starting.
Check for hostapd/wpad full before exposing the option.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
luci ignores only 127.0.0.1 in real time connections.
The dnsmasq.init script sets up resolv.conf(s) as such.
With alternate DNS servers configured 'localhost' will
resolve to '127.0.0.1' or '::1'. The connections graph
will spam itself. openwrt/luci#996
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Add support for IEEE802.11w Management Frame Protection options.
Mention in the help text that the full version of wpad/hostapd is
needed.
Currently supported by ath9k and ath10k, and in LEDE also by
mwlwifi and mt76.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* Add WPA/WPA2-PSK mixed mode to the list of allowed modes
* Add datatype validation to some fields
* Add help texts
* Reformat longest lines
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adds support for 802.11r fast transition to luci.
Corrects the deletion on nasid in issue #844
The R0KH & R1KH options are not perfect as it would be better
to separate out each option and do some sanity checking on
the values, but that is beyond my capabilities.
Signed-off-by: Warren Linton warren@linton.id.au
(squashed from three original commits in #994. commit message reworded)
The same wifi option 'nasid' is used for two purposes,
RADIUS NAS ID and 802.11r NAS ID / R0KH-ID.
In LuCI the 'nasid' option has depended on WPA-EAP/WPA2-EAP, which
can lead to accidental deletion of the option, if the user modifies
any wifi settings while he has WPA(2)-PSK & 802.11r mode.
802.11r can also be with WPA(2)-PSK, so add them to the dependency
list of allowed encryptions.
(Note: after this fix the 'nasid' field is shown unnecessarily
to "normal" WPA(2)-PSK users. It might later be set to depend on
802.11r being used, after 802.11r has been added to LuCI.)
Reference to bugs:
https://github.com/openwrt/luci/issues/844https://dev.openwrt.org/ticket/20764https://bugs.lede-project.org/index.php?do=details&task_id=274
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The previous commit erroneously used "ports" instead of "port" as name for the
option widget, causing wrong uci values to be written.
Also work around some cbi idiosyncrasies regarding MultiValue widgets which
prevented rendering the correct initial selection state.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The Overview page and Network>Interfaces page currently do not give much information about IPv6, particularly with Prefix Delegated setups. In these setups, ISP will delegate a prefix to the router. Currently LuCI doesn't display this Prefix Delegation from the ISP anywhere. A number of changes was added to this commit:
1) self:_ubus("ipv6-prefix") was extracted and put into protocol.ip6prefix.
2) Network>Interfaces page, if a .ip6prefix is present, show it under Status. (IPv6-PD).
3) On the Overview page, "Type" and "Prefix Delegated" has been added to the IPv6 Network Overview Status:
- Type will display the .proto, similar to the IPv4 case. If a .ip6prefix is present, it'll display a "-pd" at the end of the Type: i.e. dhcpv6-pd vs. dhcpv6.
- If no .ip6prefix is present, it'll do what it does currently, and just show Address, or :: if no address is present.
- If .ip6prefix is present, it'll show the "Prefix Delegated", it'll also hide "Address" if no address is present, else it'll show ifc6.ip6addr as well.
Signed-off-by: Cody R. Brown <dev@codybrown.ca>
Move the password setting into the .parse() callback to ensure that it is
updated regardless of whether "Save" or "Save & Apply" has been pressed.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Reloading the page ensures that the allowed tx power values and channel select
lists are properly populated with the new effective values.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Fixed some display problems where the UUID label of the drop down
list does not exist and the positions of other labels are misplaced
in mount settings page.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
