diff --git a/documentation/api/modules/nixio.README.html b/documentation/api/modules/nixio.README.html
index d8a17f78b4..99e036b828 100644
--- a/documentation/api/modules/nixio.README.html
+++ b/documentation/api/modules/nixio.README.html
@@ -288,7 +288,7 @@
  <br />In general all functions are namend and behave like their POSIX API 
  counterparts - where applicable - applying the following rules: 
  <ul> 
- <li>Functions should be named like the underlying POSIX API function omitting
+ <li>Functions should be named like the underlying POSIX API function omitting 
  prefixes or suffixes - especially when placed in an object-context ( 
  lockf -> File:lock, fsync -> File:sync, dup2 -> dup, ...)</li> 
  <li>If you are unclear about the behaviour of a function you should consult 
@@ -296,10 +296,10 @@
  <li>If the name is significantly different from the POSIX-function, the 
  underlying function(s) are stated in the documentation.</li> 
  <li>Parameters should reflect those of the C-API, buffer length arguments and  
- by-reference parameters should be omitted for pratical purposes.</li>
+ by-reference parameters should be omitted for practical purposes.</li> 
  <li>If a C function accepts a bitfield as parameter, it should be translated 
  into lower case string flags representing the flags if the bitfield is the  
- last parameter and also omitting prefixes or suffixes. (e.g.  waitpid
+ last parameter and also omitting prefixes or suffixes. (e.g.  waitpid 
  (pid, &s, WNOHANG | WUNTRACED) -> waitpid(pid, "nohang", "untraced"),  
  getsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)) -> 
  Socket:getopt("socket", "reuseaddr"), etc.) </li> 
diff --git a/documentation/api/modules/nixio.UnifiedIO.html b/documentation/api/modules/nixio.UnifiedIO.html
index 1717980841..700485dbe4 100644
--- a/documentation/api/modules/nixio.UnifiedIO.html
+++ b/documentation/api/modules/nixio.UnifiedIO.html
@@ -326,7 +326,7 @@
 	<li>The blocksize given is only advisory and to be seen as an upper limit, 
  if an underlying read returns less bytes the chunk is nevertheless returned.
 	
-	<li>If the limit parameter is omitted, the iterator returns data
+	<li>If the limit parameter is omitted, the iterator returns data 
  until an end-of-file, end-of-stream, connection shutdown or similar happens.
 	
 	<li>The iterator will not buffer so it is safe to mix with calls to read.
@@ -402,7 +402,7 @@ true
 	<li>This function uses the blocksource function of the source descriptor 
  and the sink function of the target descriptor.
 	
-	<li>If the limit parameter is omitted, data is copied
+	<li>If the limit parameter is omitted, data is copied 
  until an end-of-file, end-of-stream, connection shutdown or similar happens.
 	
 	<li>If the descriptor is non-blocking the function may fail with EAGAIN.
@@ -461,7 +461,7 @@ true
  blocksource function of the source descriptor and the sink function 
  of the target descriptor as a fallback mechanism.
 	
-	<li>If the limit parameter is omitted, data is copied
+	<li>If the limit parameter is omitted, data is copied 
  until an end-of-file, end-of-stream, connection shutdown or similar happens.
 	
 	<li>If the descriptor is non-blocking the function may fail with EAGAIN.
@@ -584,7 +584,7 @@ boolean
  you can pass "true" to the iterator which will flush the buffer  
  and return the bufferd data.
 	
-	<li>If the limit parameter is omitted, this function uses the nixio
+	<li>If the limit parameter is omitted, this function uses the nixio 
  buffersize (8192B by default).
 	
 	<li>If the descriptor is non-blocking the iterator may fail with EAGAIN.
@@ -628,7 +628,7 @@ Line-based Iterator
 	
 	<li>This function uses the low-level read function of the descriptor.
 	
-	<li>If the length parameter is omitted, this function returns all data
+	<li>If the length parameter is omitted, this function returns all data 
  that can be read before an end-of-file, end-of-stream, connection shutdown 
  or similar happens.
 	
diff --git a/libs/luci-lib-nixio/docsrc/README.lua b/libs/luci-lib-nixio/docsrc/README.lua
index ee3e3a216c..9860cf0919 100644
--- a/libs/luci-lib-nixio/docsrc/README.lua
+++ b/libs/luci-lib-nixio/docsrc/README.lua
@@ -33,7 +33,7 @@ module "nixio.README"
 -- <br />In general all functions are namend and behave like their POSIX API
 -- counterparts - where applicable - applying the following rules:
 -- <ul>
--- <li>Functions should be named like the underlying POSIX API function ommiting
+-- <li>Functions should be named like the underlying POSIX API function omitting
 -- prefixes or suffixes - especially when placed in an object-context (
 -- lockf -> File:lock, fsync -> File:sync, dup2 -> dup, ...)</li>
 -- <li>If you are unclear about the behaviour of a function you should consult
@@ -41,10 +41,10 @@ module "nixio.README"
 -- <li>If the name is significantly different from the POSIX-function, the
 -- underlying function(s) are stated in the documentation.</li>
 -- <li>Parameters should reflect those of the C-API, buffer length arguments and 
--- by-reference parameters should be ommitted for pratical purposes.</li>
+-- by-reference parameters should be omitted for practical purposes.</li>
 -- <li>If a C function accepts a bitfield as parameter, it should be translated
 -- into lower case string flags representing the flags if the bitfield is the 
--- last parameter and also ommiting prefixes or suffixes. (e.g.  waitpid
+-- last parameter and also omitting prefixes or suffixes. (e.g.  waitpid
 -- (pid, &s, WNOHANG | WUNTRACED) -> waitpid(pid, "nohang", "untraced"), 
 -- getsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)) ->
 -- Socket:getopt("socket", "reuseaddr"), etc.) </li>
diff --git a/libs/luci-lib-nixio/docsrc/nixio.Socket.lua b/libs/luci-lib-nixio/docsrc/nixio.Socket.lua
index 7123393bf4..c970534ed0 100644
--- a/libs/luci-lib-nixio/docsrc/nixio.Socket.lua
+++ b/libs/luci-lib-nixio/docsrc/nixio.Socket.lua
@@ -71,7 +71,7 @@ module "nixio.Socket"
 
 --- Send a message on the socket.
 -- This function is identical to sendto except for the missing destination
--- paramters. See the sendto description for a detailed description.
+-- parameters. See the sendto description for a detailed description.
 -- @class function
 -- @name Socket.send
 -- @param buffer	Buffer holding the data to be written.
@@ -167,4 +167,4 @@ module "nixio.Socket"
 -- "mtu" (IP, IPv6), "hdrincl" (IP), "multicast_ttl" (IP), "multicast_loop"
 -- (IP, IPv6), "multicast_if" (IP, IPv6), "v6only" (IPv6), "multicast_hops"
 -- (IPv6), "add_membership" (IP, IPv6), "drop_membership" (IP, IPv6)]
--- @return Value
\ No newline at end of file
+-- @return Value
diff --git a/libs/luci-lib-nixio/docsrc/nixio.UnifiedIO.lua b/libs/luci-lib-nixio/docsrc/nixio.UnifiedIO.lua
index 6e407ff2ca..6d1d5ea8c6 100644
--- a/libs/luci-lib-nixio/docsrc/nixio.UnifiedIO.lua
+++ b/libs/luci-lib-nixio/docsrc/nixio.UnifiedIO.lua
@@ -24,15 +24,15 @@ module "nixio.UnifiedIO"
 -- @class function
 -- @name UnifiedIO.readall
 -- @usage This function uses the low-level read function of the descriptor.
--- @usage If the length parameter is ommited, this function returns all data
+-- @usage If the length parameter is omitted, this function returns all data
 -- that can be read before an end-of-file, end-of-stream, connection shutdown
 -- or similar happens.
 -- @usage If the descriptor is non-blocking this function may fail with EAGAIN.
 -- @param	length	Bytes to read (optional)
--- @return	data that was successfully read if no error occured
+-- @return	data that was successfully read if no error occurred
 -- @return	- reserved for error code -
 -- @return	- reserved for error message -
--- @return  data that was successfully read even if an error occured
+-- @return  data that was successfully read even if an error occurred
 
 --- Write a block of data and wait until all data is written.
 -- @class function
@@ -40,10 +40,10 @@ module "nixio.UnifiedIO"
 -- @usage This function uses the low-level write function of the descriptor.
 -- @usage If the descriptor is non-blocking this function may fail with EAGAIN.
 -- @param	block	Bytes to write
--- @return	bytes that were successfully written if no error occured
+-- @return	bytes that were successfully written if no error occurred
 -- @return	- reserved for error code -
 -- @return	- reserved for error message -
--- @return  bytes that were successfully written even if an error occured
+-- @return  bytes that were successfully written even if an error occurred
 
 --- Create a line-based iterator.
 -- Lines may end with either \n or \r\n, these control chars are not included
@@ -56,7 +56,7 @@ module "nixio.UnifiedIO"
 -- to stop reading line-based and want to use the read(all) functions instead
 -- you can pass "true" to the iterator which will flush the buffer 
 -- and return the bufferd data.
--- @usage If the limit parameter is ommited, this function uses the nixio
+-- @usage If the limit parameter is omitted, this function uses the nixio
 -- buffersize (8192B by default).
 -- @usage If the descriptor is non-blocking the iterator may fail with EAGAIN.
 -- @usage The iterator can be used as an LTN12 source.
@@ -69,7 +69,7 @@ module "nixio.UnifiedIO"
 -- @usage This function uses the low-level read function of the descriptor.
 -- @usage The blocksize given is only advisory and to be seen as an upper limit,
 -- if an underlying read returns less bytes the chunk is nevertheless returned.
--- @usage If the limit parameter is ommited, the iterator returns data
+-- @usage If the limit parameter is omitted, the iterator returns data
 -- until an end-of-file, end-of-stream, connection shutdown or similar happens.
 -- @usage The iterator will not buffer so it is safe to mix with calls to read.
 -- @usage If the descriptor is non-blocking the iterator may fail with EAGAIN.
@@ -94,15 +94,15 @@ module "nixio.UnifiedIO"
 -- @name UnifiedIO.copy
 -- @usage This function uses the blocksource function of the source descriptor
 -- and the sink function of the target descriptor.
--- @usage If the limit parameter is ommited, data is copied
+-- @usage If the limit parameter is omitted, data is copied
 -- until an end-of-file, end-of-stream, connection shutdown or similar happens.
 -- @usage If the descriptor is non-blocking the function may fail with EAGAIN.
 -- @param	fdout Target Descriptor
 -- @param	size  Bytes to copy (optional)
--- @return	bytes that were successfully written if no error occured
+-- @return	bytes that were successfully written if no error occurred
 -- @return	- reserved for error code -
 -- @return	- reserved for error message -
--- @return  bytes that were successfully written even if an error occured
+-- @return  bytes that were successfully written even if an error occurred
 
 --- Copy data from the current descriptor to another one using kernel-space
 -- copying if possible.
@@ -111,19 +111,19 @@ module "nixio.UnifiedIO"
 -- @usage This function uses the sendfile() syscall to copy the data or the
 -- blocksource function of the source descriptor and the sink function
 -- of the target descriptor as a fallback mechanism.
--- @usage If the limit parameter is ommited, data is copied
+-- @usage If the limit parameter is omitted, data is copied
 -- until an end-of-file, end-of-stream, connection shutdown or similar happens.
 -- @usage If the descriptor is non-blocking the function may fail with EAGAIN.
 -- @param	fdout Target Descriptor
 -- @param	size  Bytes to copy (optional)
--- @return	bytes that were successfully written if no error occured
+-- @return	bytes that were successfully written if no error occurred
 -- @return	- reserved for error code -
 -- @return	- reserved for error message -
--- @return  bytes that were successfully written even if an error occured
+-- @return  bytes that were successfully written even if an error occurred
 
 --- Close the descriptor.
 -- @class function
 -- @name UnifiedIO.close
 -- @usage	If the descriptor is a TLS-socket the underlying descriptor is
 -- closed without touching the TLS connection.
--- @return	true
\ No newline at end of file
+-- @return	true
diff --git a/libs/luci-lib-nixio/docsrc/nixio.fs.lua b/libs/luci-lib-nixio/docsrc/nixio.fs.lua
index 5bfd7a6b79..ef495f260a 100644
--- a/libs/luci-lib-nixio/docsrc/nixio.fs.lua
+++ b/libs/luci-lib-nixio/docsrc/nixio.fs.lua
@@ -47,7 +47,7 @@ module "nixio.fs"
 -- @name nixio.fs.rename
 -- @param	src	Source path
 -- @param 	dest Destination path
--- @usage	It is normally not possible to rename files accross filesystems.
+-- @usage	It is normally not possible to rename files across filesystems.
 -- @return	true
 
 --- Remove an empty directory.
@@ -262,4 +262,4 @@ module "nixio.fs"
 -- omit the basename even if source and destination basename are equal. 
 -- @param	src	Source path
 -- @param 	dest Destination path
--- @return	true
\ No newline at end of file
+-- @return	true
diff --git a/libs/luci-lib-nixio/docsrc/nixio.lua b/libs/luci-lib-nixio/docsrc/nixio.lua
index 1b434d76de..1a0d69a054 100644
--- a/libs/luci-lib-nixio/docsrc/nixio.lua
+++ b/libs/luci-lib-nixio/docsrc/nixio.lua
@@ -118,7 +118,7 @@ module "nixio"
 -- @param flag1 First Flag ["append", "creat", "excl", "nonblock", "ndelay",
 -- "sync", "trunc", "rdonly", "wronly", "rdwr"]
 -- @param ...	More Flags [-"-]
--- @return flag to be used as second paramter to open
+-- @return flag to be used as second parameter to open
 
 --- Duplicate a file descriptor.
 -- @class function
@@ -167,7 +167,7 @@ module "nixio"
 
 --- Wait for some event on a file descriptor.
 -- poll() sets the revents-field of the tables provided by fds to a bitfield
--- indicating the events that occured.
+-- indicating the events that occurred.
 -- @class function
 -- @usage This function works in-place on the provided table and only
 -- writes the revents field, you can use other fields on your demand.
@@ -303,7 +303,7 @@ module "nixio"
 --- Set or unset a environment variable.
 -- @class function
 -- @name nixio.setenv
--- @usage The environment variable will be unset if value is ommited.
+-- @usage The environment variable will be unset if value is omitted.
 -- @param variable	Variable
 -- @param value		Value (optional)
 -- @return true