difos/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/qos.c

// SPDX-License-Identifier: GPL-2.0-only

#include <net/dsa.h>
#include <linux/delay.h>

#include <asm/mach-rtl838x/mach-rtl83xx.h>
#include "rtl83xx.h"

static struct rtl838x_switch_priv *switch_priv;
extern struct rtl83xx_soc_info soc_info;

enum scheduler_type {
	WEIGHTED_FAIR_QUEUE = 0,
	WEIGHTED_ROUND_ROBIN,
};

int max_available_queue[] = {0, 1, 2, 3, 4, 5, 6, 7};
int default_queue_weights[] = {1, 1, 1, 1, 1, 1, 1, 1};
int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7};

static void rtl839x_read_scheduling_table(int port)
{
	u32 cmd = 1 << 9 /* Execute cmd */
		| 0 << 8 /* Read */
		| 0 << 6 /* Table type 0b00 */
		| (port & 0x3f);
	rtl839x_exec_tbl2_cmd(cmd);
}

static void rtl839x_write_scheduling_table(int port)
{
	u32 cmd = 1 << 9 /* Execute cmd */
		| 1 << 8 /* Write */
		| 0 << 6 /* Table type 0b00 */
		| (port & 0x3f);
	rtl839x_exec_tbl2_cmd(cmd);
}

static void rtl839x_read_out_q_table(int port)
{
	u32 cmd = 1 << 9 /* Execute cmd */
		| 0 << 8 /* Read */
		| 2 << 6 /* Table type 0b10 */
		| (port & 0x3f);
	rtl839x_exec_tbl2_cmd(cmd);
}

static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable)
{
	// Enable Storm control for that port for UC, MC, and BC
	if (enable)
		sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port));
	else
		sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port));
}

u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port)
{
	u32 rate;

	if (port > priv->cpu_port)
		return 0;
	rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff;
	return rate;
}

/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */
int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate)
{
	u32 old_rate;

	if (port > priv->cpu_port)
		return -1;

	old_rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port));
	sw_w32(rate, RTL838X_SCHED_P_EGR_RATE_CTRL(port));

	return old_rate;
}

/* Set the rate limit for a particular queue in Bits/s
 * units of the rate is 16Kbps
 */
void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port,
					    int queue, u32 rate)
{
	if (port > priv->cpu_port)
		return;
	if (queue > 7)
		return;
	sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue));
}

static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv)
{
	int i;

	pr_info("Enabling Storm control\n");
	// TICK_PERIOD_PPS
	if (priv->id == 0x8380)
		sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0);

	// Set burst rate
	sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); // UC
	sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); // MC and BC

	// Set burst Packets per Second to 32
	sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); // UC
	sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); // MC and BC

	// Include IFG in storm control, rate based on bytes/s (0 = packets)
	sw_w32_mask(0, 1 << 6 | 1 << 5, RTL838X_STORM_CTRL);
	// Bandwidth control includes preamble and IFG (10 Bytes)
	sw_w32_mask(0, 1, RTL838X_SCHED_CTRL);

	// On SoCs except RTL8382M, set burst size of port egress
	if (priv->id != 0x8382)
		sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR);

	/* Enable storm control on all ports with a PHY and limit rates,
	 * for UC and MC for both known and unknown addresses */
	for (i = 0; i < priv->cpu_port; i++) {
		if (priv->ports[i].phy) {
			sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i));
			sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i));
			sw_w32(0x8000, RTL838X_STORM_CTRL_PORT_BC(i));
			rtl838x_storm_enable(priv, i, true);
		}
	}

	// Attack prevention, enable all attack prevention measures
	//sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL);
	/* Attack prevention, drop (bit = 0) problematic packets on all ports.
	 * Setting bit = 1 means: trap to CPU
	 */
	//sw_w32(0, RTL838X_ATK_PRVNT_ACT);
	// Enable attack prevention on all ports
	//sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN);
}

/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */
u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port)
{
	u32 rate;

	pr_debug("%s: Getting egress rate on port %d to %d\n", __func__, port, rate);
	if (port >= priv->cpu_port)
		return 0;

	mutex_lock(&priv->reg_mutex);

	rtl839x_read_scheduling_table(port);

	rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7));
	rate <<= 12;
	rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20;

	mutex_unlock(&priv->reg_mutex);

	return rate;
}

/* Sets the rate limit, 10MBit/s is equal to a rate value of 625, returns previous rate */
int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate)
{
	u32 old_rate;

	pr_debug("%s: Setting egress rate on port %d to %d\n", __func__, port, rate);
	if (port >= priv->cpu_port)
		return -1;

	mutex_lock(&priv->reg_mutex);

	rtl839x_read_scheduling_table(port);

	old_rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)) & 0xff;
	old_rate <<= 12;
	old_rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20;
	sw_w32_mask(0xff, (rate >> 12) & 0xff, RTL839X_TBL_ACCESS_DATA_2(7));
	sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8));

	rtl839x_write_scheduling_table(port);
	
	mutex_unlock(&priv->reg_mutex);

	return old_rate;
}

/* Set the rate limit for a particular queue in Bits/s
 * units of the rate is 16Kbps
 */
void rtl839x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port,
					int queue, u32 rate)
{
	int lsb = 128 + queue * 20;
	int low_byte = 8 - (lsb >> 5);
	int start_bit = lsb - (low_byte << 5);
	u32 high_mask = 0xfffff	>> (32 - start_bit);

	pr_debug("%s: Setting egress rate on port %d, queue %d to %d\n",
		__func__, port, queue, rate);
	if (port >= priv->cpu_port)
		return;
	if (queue > 7)
		return;

	mutex_lock(&priv->reg_mutex);

	rtl839x_read_scheduling_table(port);

	sw_w32_mask(0xfffff << start_bit, (rate & 0xfffff) << start_bit,
		    RTL839X_TBL_ACCESS_DATA_2(low_byte));
	if (high_mask)
		sw_w32_mask(high_mask, (rate & 0xfffff) >> (32- start_bit),
			    RTL839X_TBL_ACCESS_DATA_2(low_byte - 1));

	rtl839x_write_scheduling_table(port);

	mutex_unlock(&priv->reg_mutex);
}

static void rtl839x_rate_control_init(struct rtl838x_switch_priv *priv)
{
	int p, q;

	pr_info("%s: enabling rate control\n", __func__);
	/* Tick length and token size settings for SoC with 250MHz,
	 * RTL8350 family would use 50MHz
	 */
	// Set the special tick period
	sw_w32(976563, RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL);
	// Ingress tick period and token length 10G
	sw_w32(18 << 11 | 151, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0);
	// Ingress tick period and token length 1G
	sw_w32(245 << 11 | 129, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1);
	// Egress tick period 10G, bytes/token 10G and tick period 1G, bytes/token 1G
	sw_w32(18 << 24 | 151 << 16 | 185 << 8 | 97, RTL839X_SCHED_LB_TICK_TKN_CTRL);
	// Set the tick period of the CPU and the Token Len
	sw_w32(3815 << 8 | 1, RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL);

	// Set the Weighted Fair Queueing burst size
	sw_w32_mask(0xffff, 4500, RTL839X_SCHED_LB_THR);

	// Storm-rate calculation is based on bytes/sec (bit 5), include IFG (bit 6)
	sw_w32_mask(0, 1 << 5 | 1 << 6, RTL839X_STORM_CTRL);

	/* Based on the rate control mode being bytes/s
	 * set tick period and token length for 10G
	 */
	sw_w32(18 << 10 | 151, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0);
	/* and for 1G ports */
	sw_w32(246 << 10 | 129, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1);

	/* Set default burst rates on all ports (the same for 1G / 10G) with a PHY
	 * for UC, MC and BC
	 * For 1G port, the minimum burst rate is 1700, maximum 65535,
	 * For 10G ports it is 2650 and 1048575 respectively */
	for (p = 0; p < priv->cpu_port; p++) {
		if (priv->ports[p].phy && !priv->ports[p].is10G) {
			sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_UC_1(p));
			sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_MC_1(p));
			sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_BC_1(p));
		}
	}

	/* Setup ingress/egress per-port rate control */
	for (p = 0; p < priv->cpu_port; p++) {
		if (!priv->ports[p].phy)
			continue;

		if (priv->ports[p].is10G)
			rtl839x_set_egress_rate(priv, p, 625000); // 10GB/s
		else
			rtl839x_set_egress_rate(priv, p, 62500);  // 1GB/s

		// Setup queues: all RTL83XX SoCs have 8 queues, maximum rate
		for (q = 0; q < 8; q++)
			rtl839x_egress_rate_queue_limit(priv, p, q, 0xfffff);

		if (priv->ports[p].is10G) {
			// Set high threshold to maximum
			sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p));
		} else {
			// Set high threshold to maximum
			sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_1(p));
		}
	}

	// Set global ingress low watermark rate
	sw_w32(65532, RTL839X_IGR_BWCTRL_CTRL_LB_THR);
}



void rtl838x_setup_prio2queue_matrix(int *min_queues)
{
	int i;
	u32 v;

	pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL838X_QM_INTPRI2QID_CTRL));
	for (i = 0; i < MAX_PRIOS; i++)
		v |= i << (min_queues[i] * 3);
	sw_w32(v, RTL838X_QM_INTPRI2QID_CTRL);
}

void rtl839x_setup_prio2queue_matrix(int *min_queues)
{
	int i, q;

	pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL839X_QM_INTPRI2QID_CTRL(0)));
	for (i = 0; i < MAX_PRIOS; i++) {
		q = min_queues[i];
		sw_w32(i << (q * 3), RTL839X_QM_INTPRI2QID_CTRL(q));
	}
}

/* Sets the CPU queue depending on the internal priority of a packet */
void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues)
{
	int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP 
					: RTL839X_QM_PKT2CPU_INTPRI_MAP;
	int i;
	u32 v;

	pr_info("QM_PKT2CPU_INTPRI_MAP: %08x\n", sw_r32(reg));
	for (i = 0; i < MAX_PRIOS; i++)
		v |= max_queues[i] << (i * 3);
	sw_w32(v, reg);
}

void rtl83xx_setup_default_prio2queue(void)
{
	if (soc_info.family == RTL8380_FAMILY_ID) {
		rtl838x_setup_prio2queue_matrix(max_available_queue);
	} else {
		rtl839x_setup_prio2queue_matrix(max_available_queue);
	}
	rtl83xx_setup_prio2queue_cpu_matrix(max_available_queue);
}

/* Sets the output queue assigned to a port, the port can be the CPU-port */
void rtl839x_set_egress_queue(int port, int queue)
{
	sw_w32(queue << ((port % 10) *3), RTL839X_QM_PORT_QNUM(port));
}

/* Sets the priority assigned of an ingress port, the port can be the CPU-port */
void rtl83xx_set_ingress_priority(int port, int priority)
{
	if (soc_info.family == RTL8380_FAMILY_ID)
		sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port));
	else
		sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port));
	
}

int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port)
{
	u32 v;

	mutex_lock(&priv->reg_mutex);

	rtl839x_read_scheduling_table(port);
	v = sw_r32(RTL839X_TBL_ACCESS_DATA_2(8));

	mutex_unlock(&priv->reg_mutex);

	if (v & BIT(19))
		return WEIGHTED_ROUND_ROBIN;
	return WEIGHTED_FAIR_QUEUE;
}

void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port,
				      enum scheduler_type sched)
{
	enum scheduler_type t = rtl839x_get_scheduling_algorithm(priv, port);
	u32 v, oam_state, oam_port_state;
	u32 count;
	int i, egress_rate;

	mutex_lock(&priv->reg_mutex);
	/* Check whether we need to empty the egress queue of that port due to Errata E0014503 */
	if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) {
		// Read Operations, Adminstatrion and Management control register
		oam_state = sw_r32(RTL839X_OAM_CTRL);

		// Get current OAM state
		oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port));
	
		// Disable OAM to block traffice
		v = sw_r32(RTL839X_OAM_CTRL);
		sw_w32_mask(0, 1, RTL839X_OAM_CTRL);
		v = sw_r32(RTL839X_OAM_CTRL);

		// Set to trap action OAM forward (bits 1, 2) and OAM Mux Action Drop (bit 0)
		sw_w32(0x2, RTL839X_OAM_PORT_ACT_CTRL(port));

		// Set port egress rate to unlimited
		egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF);
	
		// Wait until the egress used page count of that port is 0
		i = 0;
		do {
			usleep_range(100, 200);
			rtl839x_read_out_q_table(port);
			count = sw_r32(RTL839X_TBL_ACCESS_DATA_2(6));
			count >>= 20;
			i++;
		} while (i < 3500 && count > 0);
	}

	// Actually set the scheduling algorithm
	rtl839x_read_scheduling_table(port);
	sw_w32_mask(BIT(19), sched ? BIT(19) : 0, RTL839X_TBL_ACCESS_DATA_2(8));
	rtl839x_write_scheduling_table(port);

	if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) {
		// Restore OAM state to control register
		sw_w32(oam_state, RTL839X_OAM_CTRL);

		// Restore trap action state
		sw_w32(oam_port_state, RTL839X_OAM_PORT_ACT_CTRL(port));

		// Restore port egress rate
		rtl839x_set_egress_rate(priv, port, egress_rate);
	}

	mutex_unlock(&priv->reg_mutex);
}

void rtl839x_set_scheduling_queue_weights(struct rtl838x_switch_priv *priv, int port,
					  int *queue_weights)
{
	int i, lsb, low_byte, start_bit, high_mask;

	mutex_lock(&priv->reg_mutex);

	rtl839x_read_scheduling_table(port);

	for (i = 0; i < 8; i++) {
		lsb = 48 + i * 8;
		low_byte = 8 - (lsb >> 5);
		start_bit = lsb - (low_byte << 5);
		high_mask = 0x3ff >> (32 - start_bit);
		sw_w32_mask(0x3ff << start_bit, (queue_weights[i] & 0x3ff) << start_bit,
				RTL839X_TBL_ACCESS_DATA_2(low_byte));
		if (high_mask)
			sw_w32_mask(high_mask, (queue_weights[i] & 0x3ff) >> (32- start_bit),
					RTL839X_TBL_ACCESS_DATA_2(low_byte - 1));
	}

	rtl839x_write_scheduling_table(port);
	mutex_unlock(&priv->reg_mutex);
}

void rtl838x_config_qos(void)
{
	int i, p;
	u32 v;

	pr_info("Setting up RTL838X QoS\n");
	pr_info("RTL838X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL838X_PRI_SEL_TBL_CTRL(0)));
	rtl83xx_setup_default_prio2queue();

	// Enable inner (bit 12) and outer (bit 13) priority remapping from DSCP
	sw_w32_mask(0, BIT(12) | BIT(13), RTL838X_PRI_DSCP_INVLD_CTRL0);

	/* Set default weight for calculating internal priority, in prio selection group 0
	 * Port based (prio 3), Port outer-tag (4), DSCP (5), Inner Tag (6), Outer Tag (7)
	 */
	v = 3 | (4 << 3) | (5 << 6) | (6 << 9) | (7 << 12);
	sw_w32(v, RTL838X_PRI_SEL_TBL_CTRL(0));

	// Set the inner and outer priority one-to-one to re-marked outer dot1p priority
	v = 0;
	for (p = 0; p < 8; p++)
		v |= p << (3 * p);
	sw_w32(v, RTL838X_RMK_OPRI_CTRL);
	sw_w32(v, RTL838X_RMK_IPRI_CTRL);

	v = 0;
	for (p = 0; p < 8; p++)
		v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3);
	sw_w32(v, RTL838X_PRI_SEL_IPRI_REMAP);

	// On all ports set scheduler type to WFQ
	for (i = 0; i <= soc_info.cpu_port; i++)
		sw_w32(0, RTL838X_SCHED_P_TYPE_CTRL(i));

	// Enable egress scheduler for CPU-Port
	sw_w32_mask(0, BIT(8), RTL838X_SCHED_LB_CTRL(soc_info.cpu_port));

	// Enable egress drop allways on
	sw_w32_mask(0, BIT(11), RTL838X_FC_P_EGR_DROP_CTRL(soc_info.cpu_port));

	// Give special trap frames priority 7 (BPDUs) and routing exceptions:
	sw_w32_mask(0, 7 << 3 | 7, RTL838X_QM_PKT2CPU_INTPRI_2);
	// Give RMA frames priority 7:
	sw_w32_mask(0, 7, RTL838X_QM_PKT2CPU_INTPRI_1);
}

void rtl839x_config_qos(void)
{
	int port, p, q;
	u32 v;
	struct rtl838x_switch_priv *priv = switch_priv;

	pr_info("Setting up RTL839X QoS\n");
	pr_info("RTL839X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL839X_PRI_SEL_TBL_CTRL(0)));
	rtl83xx_setup_default_prio2queue();

	for (port = 0; port < soc_info.cpu_port; port++)
		sw_w32(7, RTL839X_QM_PORT_QNUM(port));

	// CPU-port gets queue number 7
	sw_w32(7, RTL839X_QM_PORT_QNUM(soc_info.cpu_port));

	for (port = 0; port <= soc_info.cpu_port; port++) {
		rtl83xx_set_ingress_priority(port, 0);
		rtl839x_set_scheduling_algorithm(priv, port, WEIGHTED_FAIR_QUEUE);
		rtl839x_set_scheduling_queue_weights(priv, port, default_queue_weights);
		// Do re-marking based on outer tag
		sw_w32_mask(0, BIT(port % 32), RTL839X_RMK_PORT_DEI_TAG_CTRL(port));
	}

	// Remap dot1p priorities to internal priority, for this the outer tag needs be re-marked
	v = 0;
	for (p = 0; p < 8; p++)
		v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3);
	sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP);
	
	/* Configure Drop Precedence for Drop Eligible Indicator (DEI)
	 * Index 0: 0
	 * Index 1: 2
	 * Each indicator is 2 bits long
	 */
	sw_w32(2 << 2, RTL839X_PRI_SEL_DEI2DP_REMAP);

	// Re-mark DEI: 4 bit-fields of 2 bits each, field 0 is bits 0-1, ...
	sw_w32((0x1 << 2) | (0x1 << 4), RTL839X_RMK_DEI_CTRL);

	/* Set Congestion avoidance drop probability to 0 for drop precedences 0-2 (bits 24-31)
	 * low threshold (bits 0-11) to 4095 and high threshold (bits 12-23) to 4095
	 * Weighted Random Early Detection (WRED) is used
	 */
	sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(0));
	sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(1));
	sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(2));

	/* Set queue-based congestion avoidance properties, register fields are as
	 * for forward RTL839X_WRED_PORT_THR_CTRL
	 */
	for (q = 0; q < 8; q++) {
		sw_w32(255 << 24 | 78 << 12 | 68, RTL839X_WRED_QUEUE_THR_CTRL(q, 0));
		sw_w32(255 << 24 | 74 << 12 | 64, RTL839X_WRED_QUEUE_THR_CTRL(q, 0));
		sw_w32(255 << 24 | 70 << 12 | 60, RTL839X_WRED_QUEUE_THR_CTRL(q, 0));
	}
}

void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv)
{
	switch_priv = priv;

	pr_info("In %s\n", __func__);

	if (priv->family_id == RTL8380_FAMILY_ID)
		return rtl838x_config_qos();
	else if (priv->family_id == RTL8390_FAMILY_ID)
		return rtl839x_config_qos();

	if (priv->family_id == RTL8380_FAMILY_ID)
		rtl838x_rate_control_init(priv);
	else if (priv->family_id == RTL8390_FAMILY_ID)
		rtl839x_rate_control_init(priv);
	
}