difos/target/linux/ramips/image
Thomas Aldrian f755d81999 ramips: add support for Wavlink WL-WN578A2
This commit adds support for the Wavlink WL-WN578A2 dual-band wall-plug
wireless router. This device is also sold under the name SilverCrest
SWV 733 A2.

Device Specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: WPS/Power, LAN, WAN, wifi-low, wifi-med, wifi-high
- Buttons: Reset, WPS
- Sliding mode switch: AP, repeater, client
- Small sliding power switch

Flashing instructions:

U-Boot launches TFTP client if WPS button is pressed during power-on.
Configure as follows:

- Server IP: 192.168.10.100
- Filename (rename sysupgrade file to this): firmware.bin

Flashing should not take more than a minute, device will reboot
automatically.

Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
2021-05-28 01:12:21 +02:00
..
lzma-loader ramips: lzma-loader: make FLASH_START configurable 2020-09-03 14:15:30 +02:00
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 2020-03-21 20:02:55 +01:00
Makefile build: introduce $(MKHASH) 2021-05-13 15:13:15 +02:00
mt76x8.mk ramips: add support for Wavlink WL-WN578A2 2021-05-28 01:12:21 +02:00
mt7620.mk ramips: fix SUPPORTED_DEVICES for ALFA Network devices 2021-05-16 23:59:13 +02:00
mt7621.mk ramips: add support for JCG Q20 2021-05-26 23:10:45 +02:00
rt288x.mk ramips: tidy up image subtarget Makefiles 2020-05-08 18:58:39 +02:00
rt305x.mk ramips: rt305x: use lzma-loader for ZyXEL Keenetic Lite rev.B 2021-04-08 09:20:59 +02:00
rt3883.mk ramips: add support for Senao Engenius ESR600H 2020-12-22 19:11:50 +01:00