7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
51 lines
2.5 KiB
Diff
51 lines
2.5 KiB
Diff
From 8a120b47005fccce4534f8a73c3a3deda92f95fa Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Wed, 29 Jan 2020 14:32:51 +0000
|
|
Subject: [PATCH] overlays: Correct the eth_led* colour assignments
|
|
|
|
See: https://github.com/raspberrypi/firmware/issues/1311
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 17 +++++++++--------
|
|
1 file changed, 9 insertions(+), 8 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -109,27 +109,28 @@ Params:
|
|
Legal values are 2, 3, 4, 5 and 0, where
|
|
0 means never downshift (default 2). Pi3B+ only.
|
|
|
|
- eth_led0 Set mode of LED0 (usually orange). The legal
|
|
- values are:
|
|
+ eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"),
|
|
+ green on Pi4 (default "0").
|
|
+ The legal values are:
|
|
|
|
Pi3B+
|
|
|
|
- 0=link/activity 1=link1000/activity (default)
|
|
+ 0=link/activity 1=link1000/activity
|
|
2=link100/activity 3=link10/activity
|
|
4=link100/1000/activity 5=link10/1000/activity
|
|
6=link10/100/activity 14=off 15=on
|
|
|
|
Pi4
|
|
|
|
- 0=Speed/Activity (default) 1=Speed
|
|
- 2=Speed/Flash activity 3=FDX
|
|
+ 0=Speed/Activity 1=Speed
|
|
+ 2=Flash activity 3=FDX
|
|
4=Off 5=On
|
|
6=Alt 7=Speed/Flash
|
|
8=Link 9=Activity
|
|
|
|
- eth_led1 Set mode of LED1 (usually green) (Pi3B+ default
|
|
- "6", Pi4 default "8"). See eth_led0 for legal
|
|
- values.
|
|
+ eth_led1 Set mode of LED1 - green on Pi3B (default "6"),
|
|
+ amber on Pi4 (default "8"). See eth_led0 for
|
|
+ legal values.
|
|
|
|
eth_max_speed Set the maximum speed a link is allowed
|
|
to negotiate. Legal values are 10, 100 and
|