Birger Koblitz f285e8634c ramips: add support for Edimax RG21S ... SoC: MediaTek MT7621AT dual-core @ 880MHz RAM: 256M (Nanya NT5CC128M) FLASH: 16MB (Macronix MX25L12835F) WiFi: - 2.4GHz MediaTek MT7615N bgn - 5GHz MediaTek MT7615N nac Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN) USB: No BTN: Reset, WPS LED: 4 red LEDs, indistinguishable when casing closed UART: UART is present as Pads marked J1 on the PCB. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the OEM web-interface (by default:http://192.168.1.1) The sysupgrade image can be installed via TFTP from the U-Boot bootloader. Connect ethernet port 2. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [flash node rename, EDIMAX -> Edimax, complete device model name] Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-09-20 11:36:27 +02:00
..
imagebuilder	imagebuilder: fix make info for empty SUPPORTED_DEVICES	2019-08-14 08:14:52 +02:00
linux	ramips: add support for Edimax RG21S	2019-09-20 11:36:27 +02:00
sdk	sdk: use bundle-libraries.sh to ship kernel objtool tools	2019-09-03 10:45:25 +02:00
toolchain	target/toolchain/files/wrapper.sh: simplify 'case'	2019-07-15 19:29:08 +02:00
Config.in	build: add a config option for enabling a testing version of the target kernel	2019-05-11 11:37:10 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00