difos/target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7412.dts
Hauke Mehrtens eee1b34ce6 lantiq: copy target to kernel 4.19
This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-04 08:29:13 +02:00

230 lines
3.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "vr9.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/mips/lantiq_rcu_gphy.h>
/ {
compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9";
model = "AVM FRITZ!Box 7412";
chosen {
bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &info;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x8000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
dect {
label = "dect";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_PHONE>;
};
};
leds {
compatible = "gpio-leds";
power_green: power_green {
label = "fritz7412:green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power_red {
label = "fritz7412:red:power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
fon {
label = "fritz7412:green:fon";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
};
dect {
label = "fritz7412:green:dect";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "fritz7412:green:wifi";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
info: info {
label = "fritz7412:green:info";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
};
};
};
&localbus {
nand@0 {
compatible = "lantiq,nand-xway";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
lantiq,cs = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "urlader";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "nand-tffs";
reg = <0x40000 0x400000>;
read-only;
};
partition@440000 {
label = "kernel";
reg = <0x440000 0x400000>;
};
partition@840000 {
label = "ubi";
reg = <0x840000 0x3000000>;
};
partition@3840000 {
label = "reserved-kernel";
reg = <0x3840000 0x400000>;
read-only;
};
partition@3c40000 {
label = "reserved-filesystem";
reg = <0x3c40000 0x3000000>;
read-only;
};
partition@6c40000 {
label = "config";
reg = <0x6c40000 0x400000>;
read-only;
};
partition@6e40000 {
label = "nand-filesystem";
reg = <0x6e40000 0x400000>;
read-only;
};
};
};
};
&pcie0 {
status = "okay";
gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
wifi@168c,002e {
compatible = "pci168c,002e";
reg = <0 0 0 0 0>;
qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
};
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pcie-rst {
lantiq,pins = "io11";
lantiq,open-drain = <1>;
lantiq,output = <1>;
};
nand-mux {
lantiq,groups = "nand cle", "nand ale",
"nand rd", "nand cs1",
"nand rdy";
lantiq,function = "ebu";
};
nand-pins {
lantiq,pins = "io13", "io24", "io49";
lantiq,pull = <1>;
};
};
};
&gphy0 {
lantiq,gphy-mode = <GPHY_MODE_FE>;
};
&eth0 {
lantiq,phys = <&gphy0>;
interface@0 {
compatible = "lantiq,xrx200-pdi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
lantiq,switch;
ethernet@2 {
compatible = "lantiq,xrx200-pdi-port";
reg = <2>;
phy-mode = "gmii";
phy-handle = <&phy11>;
};
};
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
compatible = "lantiq,xrx200-mdio";
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
};
};
};
&vmmc {
status = "okay";
};